*
* \brief Function library for secure digital memory.
*
- * Right now, the interface for these function is the one defined in diskio.h from
- * the FatFS module.
*
* \author Francesco Sacchi <batt@develer.com>
*
* $WIZ$ module_name = "sd"
- * $WIZ$ module_depends = "kfile", "timer"
+ * $WIZ$ module_depends = "kfile", "timer", "kblock"
* $WIZ$ module_hw = "bertos/hw/hw_sd.h"
+ * $WIZ$ module_configuration = "bertos/cfg/cfg_sd.h"
*/
#ifndef DRV_SD_H
#define DRV_SD_H
-#include "cfg/cfg_fat.h"
+#include "cfg/cfg_sd.h"
-#include <kern/kfile.h>
+#include <io/kfile.h>
+#include <io/kblock.h>
#include <fs/fatfs/diskio.h>
-bool sd_test(void);
+
+#define SD_UNBUFFERED BV(0) ///< Open SD memory disabling page caching, no modification and partial write are allowed.
/**
- * Initializes the SD driver.
- *
- * \param _fd A pointer to a kfile where the SD will read/write to.
- * \return true if initialization succeds, false otherwise.
+ * SD Card context structure.
*/
-bool sd_init(KFile *_fd);
+typedef struct Sd
+{
+ KBlock b; ///< KBlock base class
+ KFile *ch; ///< SPI communication channel
+ uint16_t r1; ///< Last status data received from SD
+ uint16_t tranfer_len; ///< Lenght for the read/write commands, cached in order to increase speed.
+} Sd;
-#if CONFIG_FAT_DRIVES == 1
+bool sd_initUnbuf(Sd *sd, KFile *ch);
+bool sd_initBuf(Sd *sd, KFile *ch);
- /**
- * Same as sd_disk_status.
- *
- * Card initialization must be done with sd_init.
- */
- #define sd_disk_initialize disk_initialize
+#if CONFIG_SD_OLD_INIT
+ #if !(ARCH & ARCH_NIGHTTEST)
+ #warning "Deprecated: this API will be removed in the next major release,"
+ #warning "please disable CONFIG_SD_OLD_INIT and pass explicitly the SD context to sd_init()."
+ #endif
/**
- * Return the status of the disk.
+ * Initializes the SD driver.
*
- * \param drv The number of the drive to initialize. Currently only drive 0 is allowed.
- * \return RES_OK if the sd card was correctly initialized by a previous call to sd_init(), STA_NOINIT otherwise.
- */
- #define sd_disk_status disk_status
- /**
- * Read \a count sectors from SD card.
+ * \param ch A pointer to a SPI channel where the SD will read/write to.
+ *
+ * \return true if initialization succeds, false otherwise.
*
- * \param drv The drive number to read from. Only 0 is supported.
- * \param buf A buffer to store read data. You can get sector size using sd_disk_ioctl.
- * \param sector Start sector number.
- * \param count The number of sectors to read.
- * \return RES_OK if the function succeded, RES_ERROR if any error occurred, RES_NOTRDY if the disk is not initialized.
+ * \note This API is deprecated, disable CONFIG_SD_OLD_INIT and
+ * use the new one instead.
*
- * \sa diskio.h
+ * \see CONFIG_SD_OLD_INIT.
*/
- #define sd_disk_read disk_read
-
- #if CONFIG_FAT_FS_READONLY == 0
-
- /**
- * Write \a count sectors to SD card.
- *
- * \param drv The drive number to read from. Only 0 is supported.
- * \param buf The data to be written.
- * \param sector Start sector number.
- * \param count The number of sectors to write.
- * \return RES_OK if the function succeded, RES_ERROR if any error occurred, RES_NOTRDY if the disk is not initialized.
- *
- * \sa diskio.h
- */
- #define sd_disk_write disk_write
- #endif
+ #define sd_init(ch) {static struct Sd sd; sd_initUnbuf(&sd, (ch));}
+
+#else
/**
- * Interface to send device independant commands to the device.
+ * Initializes the SD driver.
*
- * \sa diskio.h and related documentation for further explanations.
+ * \param sd The SD KBlock context.
+ * \param ch A pointer to a SPI channel where the SD will read/write to.
+ * \param buffered Set to true if you want the KBlock to be buffered,
+ * to false otherwise. The FatFs module does not require the device
+ * to be buffered because it has an internal cache. This will save
+ * 512 bytes of RAM in this case.
+ *
+ * \return true if initialization succeds, false otherwise.
*/
- #define sd_disk_ioctl disk_ioctl
+ #define sd_init(sd, ch, buffered) ((buffered & SD_UNBUFFERED) ? sd_initUnbuf((sd), (ch)) : sd_initBuf((sd), (ch)))
+
+#endif
+
+
+#define KBT_SD MAKE_ID('S', 'D', 'B', 'K')
+
+bool sd_test(Sd *sd);
+void sd_writeTest(Sd *sd);
+
+INLINE Sd *SD_CAST(KBlock *b)
+{
+ ASSERT(b->priv.type == KBT_SD);
+ return (Sd *)b;
+}
-#endif /* CONFIG_FAT_DRIVES == 1 */
#endif /* DRV_SD_H */