rename cpuXXX_t to cpu_XXX_t

[bertos.git] / bertos / hw / hw_lcd.h

diff --git a/bertos/hw/hw_lcd.h b/bertos/hw/hw_lcd.h
index b7cf5f891a8ffa526d65559534a32607d20351a9..3a206a0f5df48e0ef69fdd3d3935b6357142c204 100644 (file)
--- a/bertos/hw/hw_lcd.h
+++ b/bertos/hw/hw_lcd.h
@@ -26,63 +26,54 @@
  * invalidate any other reasons why the executable file might be covered by
  * the GNU General Public License.
  *
- * Copyright 2003, 2004, 2005 Develer S.r.l. (http://www.develer.com/)
- * Copyright 2001 Bernardo Innocenti <bernie@codewiz.org>
+ * Copyright 2003, 2004, 2005, 2008 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2001 Bernie Innocenti <bernie@codewiz.org>
  *
  * -->
  *
+ * \brief LCD low-level hardware macros
+ *
  * \version $Id$
  *
- * \author Bernardo Innocenti <bernie@develer.com>
+ * \author Bernie Innocenti <bernie@codewiz.org>
  * \author Stefano Fedrigo <aleph@develer.com>
  *
- * \brief LCD low-level hardware macros
  */
 
 #ifndef HW_LCD_H
 #define HW_LCD_H
 
-#include <appconfig.h>
-//#include <hw.h>
+#include "cfg/cfg_lcd.h"  /* CONFIG_LCD_4BIT */
+#include <cfg/macros.h>   /* BV() */
+#include <cfg/debug.h>
 
 #include <cpu/attr.h>
 #include <cpu/irq.h>
 #include <cpu/types.h>
 
-#include <cfg/macros.h> /* BV() */
-#include <cfg/debug.h>
-
-#include <avr/io.h>
-#include <stdbool.h>
-#include <inttypes.h>
+#warning TODO:This is an example implementation, you must implement it!
 
 /**
  * \name LCD I/O pins/ports
  * @{
  */
-#define LCD_RS    BV(PG3)
-#define LCD_RW    BV(PG0)
-#define LCD_E     BV(PG2)
-#define LCD_DB0   BV(PA0)
-#define LCD_DB1   BV(PA1)
-#define LCD_DB2   BV(PA2)
-#define LCD_DB3   BV(PA3)
-#define LCD_DB4   BV(PA4)
-#define LCD_DB5   BV(PA5)
-#define LCD_DB6   BV(PA6)
-#define LCD_DB7   BV(PA7)
+#define LCD_RS    /* Implement me! */
+#define LCD_RW    /* Implement me! */
+#define LCD_E     /* Implement me! */
+#define LCD_DB0   /* Implement me! */
+#define LCD_DB1   /* Implement me! */
+#define LCD_DB2   /* Implement me! */
+#define LCD_DB3   /* Implement me! */
+#define LCD_DB4   /* Implement me! */
+#define LCD_DB5   /* Implement me! */
+#define LCD_DB6   /* Implement me! */
+#define LCD_DB7   /* Implement me! */
 /*@}*/
 
 /**
  * \name DB high nibble (DB[4-7])
  * @{
  */
-#define LCD_PORT     PORTG
-#define LCD_DB_PORT  PORTA
-#define LCD_PIN      PING
-#define LCD_DB_PIN   PINA
-#define LCD_DDR      DDRG
-#define LCD_DB_DDR   DDRA
 
 #if CONFIG_LCD_4BIT
        #define LCD_MASK    (LCD_DB7 | LCD_DB6 | LCD_DB5 | LCD_DB4)
@@ -97,29 +88,29 @@
  * \name LCD bus control macros
  * @{
  */
-#define LCD_CLR_RS      (LCD_PORT &= ~LCD_RS)
-#define LCD_SET_RS      (LCD_PORT |=  LCD_RS)
-#define LCD_CLR_RD      (LCD_PORT &= ~LCD_RW)
-#define LCD_SET_RD      (LCD_PORT |=  LCD_RW)
-#define LCD_CLR_E       (LCD_PORT &= ~LCD_E)
-#define LCD_SET_E       (LCD_PORT |=  LCD_E)
+#define LCD_CLR_RS      /* Implement me! */
+#define LCD_SET_RS      /* Implement me! */
+#define LCD_CLR_RD      /* Implement me! */
+#define LCD_SET_RD      /* Implement me! */
+#define LCD_CLR_E       /* Implement me! */
+#define LCD_SET_E       /* Implement me! */
 
 #if CONFIG_LCD_4BIT
-       #define LCD_WRITE_H(x)  (LCD_DB_PORT = (LCD_DB_PORT & ~LCD_MASK) | (((x) >> (4 - LCD_SHIFT)) & LCD_MASK))
-       #define LCD_WRITE_L(x)  (LCD_DB_PORT = (LCD_DB_PORT & ~LCD_MASK) | (((x) << LCD_SHIFT) & LCD_MASK))
-       #define LCD_READ_H      ((LCD_DB_PIN & LCD_MASK) >> (4 - LCD_SHIFT))
-       #define LCD_READ_L      ((LCD_DB_PIN & LCD_MASK) >> LCD_SHIFT)
+       #define LCD_WRITE_H(x)  ((void)x)/* Implement me! */
+       #define LCD_WRITE_L(x)  ((void)x)/* Implement me! */
+       #define LCD_READ_H      ( 0 /* Implement me! */ )
+       #define LCD_READ_L      ( 0 /* Implement me! */ )
 #else
-       #define LCD_WRITE(x) (LCD_DB_PORT = (x))
-       #define LCD_READ (LCD_DB_PIN)
+       #define LCD_WRITE(x)    ((void)x)/* Implement me! */
+       #define LCD_READ        (0 /* Implement me! */ )
 #endif
 /*@}*/
 
 /** Set data bus direction to output (write to display) */
-#define LCD_DB_OUT  (LCD_DB_DDR |= LCD_MASK)
+#define LCD_DB_OUT          /* Implement me! */
 
 /** Set data bus direction to input (read from display) */
-#define LCD_DB_IN   (LCD_DB_DDR &= ~LCD_MASK)
+#define LCD_DB_IN           /* Implement me! */
 
 /** Delay for write (Enable pulse width, 220ns) */
 #define LCD_DELAY_WRITE \
@@ -143,11 +134,14 @@
 
 INLINE void lcd_bus_init(void)
 {
-       cpuflags_t flags;
+       cpu_flags_t flags;
        IRQ_SAVE_DISABLE(flags);
 
-       LCD_PORT = (LCD_PORT & ~(LCD_E | LCD_RW)) | LCD_RS;
-       LCD_DDR  |= LCD_RS | LCD_RW | LCD_E;
+       /*
+        * Here set bus pin!
+        * to init a lcd device.
+        *
+        */
 
        /*
         * Data bus is in output state most of the time: