Exclude buildrev.h from the codelite project file.

[bertos.git] / bertos / mware / formatwr.c

diff --git a/bertos/mware/formatwr.c b/bertos/mware/formatwr.c
index 0c0e39c7d85ff7a990f5e488c183c8e08327de84..3f11522e2c5e8daa63b3fa2156a824d3f7c1383d 100644 (file)
--- a/bertos/mware/formatwr.c
+++ b/bertos/mware/formatwr.c
@@ -51,16 +51,16 @@
  * \endcode
  *
  * Code size on AVR4 with GCC 3.4.1 (-O2):
- *   PRINTF_FULL        2912byte (0xB60)
- *   PRINTF_NOFLOAT     1684byte (0x694)
- *   PRINTF_REDUCED      924byte (0x39C)
- *   PRINTF_NOMODIFIERS  416byte (0x1A0)
+ * \li  PRINTF_FULL        2912byte (0xB60)
+ * \li  PRINTF_NOFLOAT     1684byte (0x694)
+ * \li  PRINTF_REDUCED      924byte (0x39C)
+ * \li  PRINTF_NOMODIFIERS  416byte (0x1A0)
  *
  * Code/data size in words on DSP56K with CodeWarrior 6.0:
- *   PRINTF_FULL         1493/45
- *   PRINTF_NOFLOAT      795/45
- *   PRINTF_REDUCED      482/0
- *   PRINTF_NOMODIFIERS  301/0
+ * \li  PRINTF_FULL         1493/45
+ * \li  PRINTF_NOFLOAT      795/45
+ * \li  PRINTF_REDUCED      482/0
+ * \li  PRINTF_NOMODIFIERS  301/0
  *
  * The reduced version of formatter is suitable when program size is critical
  * rather than formatting power.  This routine uses less than 20 bytes of
@@ -82,7 +82,7 @@
 #include "cfg/cfg_formatwr.h"  /* CONFIG_ macros */
 #include <cfg/debug.h>         /* ASSERT */
 
-#include <mware/pgm.h>
+#include <cpu/pgm.h>
 #include <mware/hex.h>
 
 #ifndef CONFIG_PRINTF_N_FORMATTER
@@ -108,7 +108,7 @@
 
        /*bernie: save some memory, who cares about floats with lots of decimals? */
        #define FRMWRI_BUFSIZE 134
-       #warning 134 is too much, the code must be fixed to have a lower precision limit
+       #warning FIXME:134 is too much, the code must be fixed to have a lower precision limit
 #else
        /*
         * Conservative estimate. Should be (probably) 12 (which is the size necessary