+++ /dev/null
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction. Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License. This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief Configuration file for serial module.
- *
- * \author Daniele Basile <asterix@develer.com>
- */
-
-#ifndef CFG_SER_H
-#define CFG_SER_H
-
-/**
- * Example of setting for serial port and
- * spi port.
- * Edit these define for your project.
- */
-
-/**
- * Size of the outbound FIFO buffer for port 0 [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- */
-#define CONFIG_UART0_TXBUFSIZE 32
-
-/**
- * Size of the inbound FIFO buffer for port 0 [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- */
-#define CONFIG_UART0_RXBUFSIZE 32
-
-/**
- * Size of the outbound FIFO buffer for port 1 [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)"
- */
-#define CONFIG_UART1_TXBUFSIZE 32
-
-/**
- * Size of the inbound FIFO buffer for port 1 [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)"
- */
-#define CONFIG_UART1_RXBUFSIZE 32
-
-/**
- * Size of the outbound FIFO buffer for port 2 [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2"
- */
-#define CONFIG_UART2_TXBUFSIZE 32
-
-/**
- * Size of the inbound FIFO buffer for port 2 [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- * $WIZ$ supports = "lm3s or lpc2"
- */
-#define CONFIG_UART2_RXBUFSIZE 32
-
-/**
- * Size of the outbound FIFO buffer for port 3 [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- * $WIZ$ supports = "lpc2"
- */
-#define CONFIG_UART3_TXBUFSIZE 32
-
-/**
- * Size of the inbound FIFO buffer for port 3 [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- * $WIZ$ supports = "lpc2"
- */
-#define CONFIG_UART3_RXBUFSIZE 32
-
-
-/**
- * Size of the outbound FIFO buffer for SPI port [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- * $WIZ$ supports = "avr"
- */
-#define CONFIG_SPI_TXBUFSIZE 32
-
-/**
- * Size of the inbound FIFO buffer for SPI port [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- * $WIZ$ supports = "avr"
- */
-#define CONFIG_SPI_RXBUFSIZE 32
-
-/**
- * Size of the outbound FIFO buffer for SPI port 0 [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- * $WIZ$ supports = "at91"
- */
-#define CONFIG_SPI0_TXBUFSIZE 32
-
-/**
- * Size of the inbound FIFO buffer for SPI port 0 [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- * $WIZ$ supports = "at91"
- */
-#define CONFIG_SPI0_RXBUFSIZE 32
-
-/**
- * Size of the outbound FIFO buffer for SPI port 1 [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- * $WIZ$ supports = "at91"
- */
-#define CONFIG_SPI1_TXBUFSIZE 32
-
-/**
- * Size of the inbound FIFO buffer for SPI port 1 [bytes].
- * $WIZ$ type = "int"
- * $WIZ$ min = 2
- * $WIZ$ supports = "at91"
- */
-#define CONFIG_SPI1_RXBUFSIZE 32
-
-/**
- * SPI data order.
- *
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "ser_order_bit"
- * $WIZ$ supports = "avr"
- */
-#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
-
-/**
- * SPI clock division factor.
- * $WIZ$ type = "int"
- * $WIZ$ supports = "avr"
- */
-#define CONFIG_SPI_CLOCK_DIV 16
-
-/**
- * SPI clock polarity: normal low or normal high.
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "ser_spi_pol"
- * $WIZ$ supports = "avr"
- */
-#define CONFIG_SPI_CLOCK_POL SPI_NORMAL_LOW
-
-/**
- * SPI clock phase you can choose sample on first edge or
- * sample on second clock edge.
- * $WIZ$ type = "enum"
- * $WIZ$ value_list = "ser_spi_phase"
- * $WIZ$ supports = "avr"
- */
-#define CONFIG_SPI_CLOCK_PHASE SPI_SAMPLE_ON_FIRST_EDGE
-
-/**
- * Default transmit timeout (ms). Set to -1 to disable timeout support.
- * $WIZ$ type = "int"
- * $WIZ$ min = -1
- */
-#define CONFIG_SER_TXTIMEOUT -1
-
-/**
- * Default receive timeout (ms). Set to -1 to disable timeout support.
- * $WIZ$ type = "int"
- * $WIZ$ min = -1
- */
-#define CONFIG_SER_RXTIMEOUT -1
-
-/**
- * Use RTS/CTS handshake.
- * $WIZ$ type = "boolean"
- * $WIZ$ supports = "False"
- */
-#define CONFIG_SER_HWHANDSHAKE 0
-
-/**
- * Default baudrate for all serial ports (set to 0 to disable).
- * $WIZ$ type = "int"
- * $WIZ$ min = 0
- */
-#define CONFIG_SER_DEFBAUDRATE 0UL
-
-/// Enable strobe pin for debugging serial interrupt. $WIZ$ type = "boolean"
-#define CONFIG_SER_STROBE 0
-
-#endif /* CFG_SER_H */
projects / bertos.git / blobdiff