--- /dev/null
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
+ *
+ * -->
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ *
+ * \brief Simple application that implement a log device, running on the AT91SAM7X-EK board.
+ *
+ * The main scope of this application is to show you how use the SD memory card and read and write
+ * settings and logs. Thanks the ini parser module we can read settings, stored on memory card,
+ * and change the application behaviour.
+ * Generally the application work in this way:
+ * - Try to access to SD memory card, if it is present we read the inifile
+ * - If we have read correctly from SD, we compute the value that we want log
+ * (temperature, pressure and supplay voltage)
+ * - If we have enable (from ini file) to log on the file we write the log on it.
+ * - If we have enable (from ini file) to log on the serial we write the log on it.
+ * - wait the sample_time (from ini file)
+ * - contine from beginning.
+ *
+ * Here we put the ini file that this example uses. To use it copy
+ * the folling configutation line into the file called sd_fat.ini (or see INI_FILE_NAME
+ * define if you want chande the name).
+ * \code
+ *
+ * # Bertos SD fat project example
+ * #
+ * # Basic configurarion
+ * #
+ *
+ * [log]
+ * # Name of log file
+ * name = test.log
+ * # Enable the logging on serial device (enable = 1, disable = 0)
+ * log_on_serial = 1
+ * # Enable logging on sd file (enable = 1, disable = 0)
+ * log_on_file = 1
+ * # Period between two log in millisecond
+ * sample_time = 1000
+ *
+ * [serial_log]
+ * # Select serial port where log
+ * port = 0
+ * # Serial port baudrate
+ * baud = 115200
+ *
+ * [log_format]
+ * # Default text to insert on each log line
+ * line_header = BeRTOS Log:
+ * # Use this char to separate each log field
+ * field_sep = ;
+ *
+ * [temperature]
+ * unit_label = C
+ *
+ * [pressure]
+ * unit_label = hPa
+ *
+ * [voltage]
+ * unit_label = V
+ *
+ * \endcode
+ */
+
+#include <cfg/debug.h>
+
+// Define logging setting (for cfg/log.h module).
+#define LOG_LEVEL 3
+#define LOG_VERBOSITY 0
+#include <cfg/log.h>
+#include <cfg/macros.h>
+
+#include <cpu/irq.h>
+
+#include <drv/timer.h>
+#include <drv/sd.h>
+#include <drv/ser.h>
+#include <drv/tmp123.h>
+#include <drv/spi_dma.h>
+#include <drv/mpxx6115a.h>
+#include <drv/adc.h>
+
+#include <fs/fat.h>
+
+#include <mware/ini_reader.h>
+
+#include <verstag.h>
+#include <buildrev.h>
+
+#include <string.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+/*
+ * Setting structure define
+ */
+typedef struct INISetting
+{
+ // INI Log section
+ char name[80]; ///< Name of log file
+ bool log_on_serial; ///< Enable the logging on serial device
+ bool log_on_file; ///< Enable logging on sd file
+ mtime_t sample_time; ///< Period between two log (millisecond)
+
+ //INI serial log section
+ int port; ///< Select serial port where log
+ int baud; ///< Serial port baudrate
+
+ // INI log format section
+ char line_header[80]; ///< Default text to insert on each log line
+ char field_sep[10]; ///< Use this char to separate each log field
+
+ // INI temperature section
+ char temp_unit_label[10]; ///< Default label for measure unit
+
+ // INI pressure section
+ char press_unit_label[10]; ///< Default label for measure unit
+
+ // INI voltage section
+ char voltage_unit_label[10]; ///< Default label for measure unit
+
+
+} INISetting;
+
+/*
+ * Setting and various defines.
+ */
+#define INI_FILE_NAME "sd_fat.ini" ///< Default ini file name on SD card.
+
+// INI Log section
+#define LOG_SECTION "log" ///< Log section
+#define LOG_NAME_KEY "name" ///< Name of log file
+#define LOG_ON_SERIAL "log_on_serial" ///< Enable the logging on serial device
+#define LOG_ON_FILE "log_on_file" ///< Enable logging on sd file
+#define LOG_SAMPLE_TIME "sample_time" ///< Period between two log
+
+//INI serial log section
+#define SERIAL_LOG "serial_log" ///< Serial log section
+#define SERIAL_PORT "port" ///< Select serial port where log
+#define SERIAL_BAUD "baud" ///< Serial port baudrate
+
+// INI log format section
+#define LOG_FORMAT_SEC "log_format" ///< log format section
+#define FORMAT_LINE_HEADER "line_header" ///< Default text to insert on each log line
+#define FORMAT_FIELD_SEP "field_sep" ///< Use this char to separate each log field
+
+// INI temperature section
+#define TEMPERATURE "temperature" ///< temperarute section
+#define TEMP_UNIT_LABEL "unit_label" ///< Default label for measure unit
+
+// INI pressure section
+#define PRESSURE "pressure" ///< pressure section
+#define PRESS_UNIT_LABEL "unit_label" ///< Default label for measure unit
+
+// INI voltsge section
+#define VOLTAGE "voltage" ///< voltage section
+#define VOLTAGE_UNIT_LABEL "unit_label" ///< Default label for measure unit
+
+/**
+ * Voltage reference in volts for ADC.
+ * \note This value should be complied to jumper J13 on AT91SAM7X-EK board, and
+ * the supply voltade for sensor.
+ * See schamatics for more info.
+ */
+#define ADC_VOLTAGE_REF 3300
+/**
+ * Channel where the sensor we connect it (AD6)
+ * See schamatics for more info.
+ */
+#define PRESSURE_SENSOR_CH 6
+
+/**
+ * ADC channle to read voltage supplay
+ * \note we connect board power supplay (+3.3V) to AD3 port with wire.
+ */
+#define SUPPLAY_VOLTAGE_CH 3
+#define ADC_SUPPLAY_VOLTAGE 3300
+
+/*
+ * Static definition for application devices.
+ */
+static SpiDma spi_dma;
+static Serial temp_sensor_bus;
+static Serial log_port;
+static Sd sd;
+
+static void init(void)
+{
+ IRQ_ENABLE;
+ kdbg_init();
+
+ timer_init();
+ LOG_INFO("TIMER init..ok\n");
+
+ /*
+ * Init temperature sensor device.
+ * - init the temperature driver
+ * - init the spi communication channel
+ */
+ tmp123_init();
+ // Init SPI connected to sensor temperature
+ spimaster_init(&temp_sensor_bus, SER_SPI1);
+ ser_setbaudrate(&temp_sensor_bus, 1000000L);
+ LOG_INFO("TMP123 sensor init..ok\n");
+
+ // Init SPI bus to communicate to SD card
+ spi_dma_init(&spi_dma);
+ spi_dma_setclock(20000000L);
+ LOG_INFO("SD SPI init..ok\n");
+
+ adc_init();
+ LOG_INFO("ADC init..ok\n");
+
+}
+
+int main(void)
+{
+ // SD fat filesystem context
+ FATFS fs;
+
+ // Context files that we would manage
+ FatFile ini_file;
+ FatFile log_file;
+
+ init();
+
+ LOG_INFO("SD fat example project %s: %d times\n", VERS_HOST, VERS_BUILD);
+
+ while (1)
+ {
+ bool sd_ok = true;
+ FRESULT result;
+
+ // Setting info
+ INISetting ini_set;
+ memset(&ini_set, 0, sizeof(ini_set));
+
+ sd_ok = sd_init(&sd, &spi_dma.fd, 0);
+
+ if (sd_ok)
+ {
+ LOG_INFO("Mount FAT filesystem.\n");
+ if ((result = f_mount(0, &fs)) != FR_OK)
+ {
+ LOG_ERR("Mounting FAT volumes error[%d]\n", result);
+ sd_ok = false;
+ }
+
+ LOG_INFO("Read setting from ini file: %s\n", INI_FILE_NAME);
+ if (sd_ok && ((result = fatfile_open(&ini_file, INI_FILE_NAME, FA_READ)) != FR_OK))
+ {
+ LOG_ERR("Could not open ini file: %s error[%d,]\n", INI_FILE_NAME, result);
+ sd_ok = false;
+ }
+
+ if (sd_ok)
+ {
+ /*
+ * If sd is ok, we read all setting from INI file.
+ * NOTE: if one ini key or section was not found into INI
+ * file, the iniparser return the defaul value.
+ */
+ ini_getString(&ini_file.fd, LOG_SECTION, LOG_NAME_KEY, "default.log", ini_set.name, sizeof(ini_set.name));
+ LOG_INFO("Log file name [%s]\n", ini_set.name);
+
+ char tmp[25];
+ ini_getString(&ini_file.fd, LOG_SECTION, LOG_ON_SERIAL, "1", tmp, sizeof(tmp));
+ ini_set.log_on_serial = atoi(tmp);
+ LOG_INFO("Log serial [%d]\n", ini_set.log_on_serial);
+ ini_getString(&ini_file.fd, LOG_SECTION, LOG_ON_FILE, "1", tmp, sizeof(tmp));
+ ini_set.log_on_file = atoi(tmp);
+ LOG_INFO("Log sd [%d]\n", ini_set.log_on_file);
+ ini_getString(&ini_file.fd, LOG_SECTION, LOG_SAMPLE_TIME, "500", tmp, sizeof(tmp));
+ ini_set.sample_time = atoi(tmp);
+ LOG_INFO("Sample time [%ld]\n", ini_set.sample_time);
+
+ ini_getString(&ini_file.fd, SERIAL_LOG, SERIAL_PORT, "0", tmp, sizeof(tmp));
+ ini_set.port = atoi(tmp);
+ LOG_INFO("Serial port [%d]\n", ini_set.port);
+ ini_getString(&ini_file.fd, SERIAL_LOG, SERIAL_BAUD, "115200", tmp, sizeof(tmp));
+ ini_set.baud = atoi(tmp);
+ LOG_INFO("Serial buad [%d]\n", ini_set.baud);
+
+ ini_getString(&ini_file.fd, LOG_FORMAT_SEC, FORMAT_LINE_HEADER, "BeRTOS: ", ini_set.line_header, sizeof(ini_set.line_header));
+ LOG_INFO("Serial line header[%s]\n", ini_set.line_header);
+
+ ini_getString(&ini_file.fd, LOG_FORMAT_SEC, FORMAT_FIELD_SEP, ",", ini_set.field_sep, sizeof(ini_set.field_sep));
+ LOG_INFO("Serial char sep[%s]\n", ini_set.field_sep);
+
+ ini_getString(&ini_file.fd, TEMPERATURE, TEMP_UNIT_LABEL, "C", ini_set.temp_unit_label, sizeof(ini_set.temp_unit_label));
+ LOG_INFO("Temp unit label[%s]\n", ini_set.temp_unit_label);
+
+ ini_getString(&ini_file.fd, PRESSURE, PRESS_UNIT_LABEL, "hPa", ini_set.press_unit_label, sizeof(ini_set.press_unit_label));
+ LOG_INFO("Press unit label[%s]\n", ini_set.press_unit_label);
+
+ ini_getString(&ini_file.fd, VOLTAGE, VOLTAGE_UNIT_LABEL, "V", ini_set.voltage_unit_label, sizeof(ini_set.voltage_unit_label));
+ LOG_INFO("Press unit label[%s]\n", ini_set.voltage_unit_label);
+
+ }
+ }
+
+ if (ini_set.log_on_serial)
+ {
+ // Init serial log port
+ ser_init(&log_port, ini_set.port);
+ ser_setbaudrate(&log_port, ini_set.baud);
+ LOG_INFO("SERIAL init..port[%d] buad[%d]\n", ini_set.port, ini_set.baud);
+ }
+
+ char log_string[160];
+ memset(log_string, 0, sizeof(log_string));
+
+ // Supplay voltage
+ uint16_t vdd = ADC_RANGECONV(adc_read(SUPPLAY_VOLTAGE_CH), 0, ADC_SUPPLAY_VOLTAGE);
+
+ // Read temperature
+ int16_t tmp = tmp123_read(&temp_sensor_bus.fd);
+
+ // Read pressure
+ uint16_t vout = ADC_RANGECONV(adc_read(PRESSURE_SENSOR_CH), 0, vdd);
+ int16_t press = mpxx6115a_press(vout, vdd);
+
+ /*
+ * Format string whit read data
+ * line_header + temp + temp_unit_label + field_sep + press + press_unit_label + field_sep + vdd + voltage_unit_label
+ */
+ int wr_len = sprintf(log_string, "%s%d.%01d%s%s%d%s%s%d.%d%s\r\n", ini_set.line_header,
+ tmp / 10, ABS(tmp % 10),
+ ini_set.temp_unit_label,
+ ini_set.field_sep,
+ press,
+ ini_set.press_unit_label,
+ ini_set.field_sep,
+ vdd / 1000, ABS(vdd % 1000),
+ ini_set.voltage_unit_label);
+
+
+ /*
+ * if SD is ok, try to open log file and write our data and, only
+ * if by configuration we have enable the log on file
+ */
+ if (sd_ok && ini_set.log_on_file)
+ {
+ // Open log file and do not overwrite the previous log file
+ result = fatfile_open(&log_file, ini_set.name, FA_OPEN_EXISTING | FA_WRITE);
+
+ // If the log file there isn't we create the new one
+ if (result == FR_NO_FILE)
+ {
+ result = fatfile_open(&log_file, ini_set.name, FA_CREATE_NEW | FA_WRITE);
+ LOG_INFO("Create the log file: %s\n", ini_set.name);
+ }
+
+ if ( result == FR_OK)
+ {
+ LOG_INFO("Opened log file '%s' size %ld\n", ini_set.name, log_file.fat_file.fsize);
+
+ // To append data we should go to end of file before to start to write
+ kfile_seek(&log_file.fd, 0, KSM_SEEK_END);
+
+ int len = kfile_write(&log_file.fd, log_string, wr_len);
+
+ // Flush data and close the files.
+ kfile_flush(&log_file.fd);
+ kfile_close(&log_file.fd);
+
+ // Unmount always to prevent accidental sd remove.
+ f_mount(0, NULL);
+ LOG_INFO("Wrote [%d]\n", len);
+ }
+ else
+ {
+ LOG_ERR("Unable to open file: '%s' error[%d]\n", ini_set.name, result);
+ }
+ }
+
+ // If by configuration we have enable the log on serial, we log it
+ if (ini_set.log_on_serial)
+ kfile_write(&log_port.fd, log_string, wr_len);
+
+ timer_delay(ini_set.sample_time);
+ }
+
+ return 0;
+}
+