Renamed project to insert it into nightly test.

[bertos.git] / boards / sam3n-ek / templates / kernel / main.c

diff --git a/boards/sam3n-ek/templates/kernel/main.c b/boards/sam3n-ek/templates/kernel/main.c
deleted file mode 100644 (file)
index 5574079..0000000
--- a/boards/sam3n-ek/templates/kernel/main.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2010 Develer S.r.l. (http://www.develer.com/)
- *
- * -->
- *
- * \author Daniele Basile <asterix@develer.com>
- *
- * \brief Empty project.
- *
- * This is a minimalist project, it just initializes the hardware of the
- * supported board and proposes an empty main.
- */
-
-#include "hw/hw_led.h"
-#include "hw/hw_lcd.h"
-
-#include <cfg/debug.h>
-
-#include <cpu/irq.h>
-#include <drv/spi_dma.h>
-
-#include <drv/timer.h>
-#include <drv/kbd.h>
-#include <drv/lcd_ili9225.h>
-
-#include <kern/proc.h>
-#include <kern/monitor.h>
-
-/* Bitmap to display on the OLED display */
-static Bitmap lcd_bitmap;
-/* Raster associated to the Bitmap image */
-static uint8_t raster[RAST_SIZE(LCD_WIDTH, LCD_HEIGHT)];
-/* LCD spi context with DMA access */
-struct SpiDma spi;
-
-static void init(void)
-{
-    /* Enable all the interrupts */
-    IRQ_ENABLE;
-
-       /* Initialize debugging module (allow kprintf(), etc.) */
-       kdbg_init();
-       /* Initialize LED driver */
-       LED_INIT();
-       /* Initialize system timer */
-       timer_init();
-
-       /*
-        * Kernel initialization: processes (allow to create and dispatch
-        * processes using proc_new()).
-        */
-       proc_init();
-
-       /* Init spi on dma to drive lcd */
-       spi_dma_init(&spi);
-       spi_dma_setclock(LCD_SPICLOCK);
-       /* Initialize the dispaly */
-       lcd_ili9225_init(&spi.fd);
-       /* Init the backligth display leds */
-       LCD_BACKLIGHT_INIT();
-       lcd_setBacklight(LCD_BACKLIGHT_MAX);
-       /* Draw an empty Bitmap on the screen */
-       gfx_bitmapInit(&lcd_bitmap, raster, LCD_WIDTH, LCD_HEIGHT);
-       /* Refresh the display */
-       lcd_ili9225_blitBitmap(&lcd_bitmap);
-       /* Initialize the keypad driver */
-       kbd_init();
-
-}
-
-
-static void NORETURN led_process(void)
-{
-       static int i = 0;
-       static bool turn = true;
-
-       /* Periodically blink the led (toggle each 100 ms) */
-       while (1)
-       {
-               if (turn)
-               {
-                       LED_ON(i);
-                       if (i)
-                               LED_OFF(i - 1);
-
-                       if (i == 2)
-                       {
-                               turn = false;
-                               timer_delay(70);
-                       }
-                       else
-                               i++;
-               }
-               else
-               {
-                       LED_OFF(i);
-                       if (i > 0)
-                               LED_ON(i-1);
-
-                       if (!i)
-                       {
-                               turn = true;
-                               timer_delay(70);
-                       }
-                       else
-                               i--;
-               }
-               timer_delay(300);
-       }
-}
-
-int main(void)
-{
-       /* Hardware initialization */
-       init();
-
-       /* Create a new child process */
-       proc_new(&led_process, NULL, KERN_MINSTACKSIZE * 2, NULL);
-
-       /*
-        * The main process is kept to periodically report the stack
-        * utilization of all the processes (1 probe per second).
-        */
-       while (1)
-       {
-               monitor_report();
-               timer_delay(1000);
-       }
-
-       return 0;
-}
-