Spacing fix

[bertos.git] / drv / dataflash.c

diff --git a/drv/dataflash.c b/drv/dataflash.c
index eab316581be7e633ba6ba201e73c253b707d31ea..2f4f897ee0665133d6fb70f355fb722115d37efa 100644 (file)
--- a/drv/dataflash.c
+++ b/drv/dataflash.c
@@ -50,7 +50,7 @@
 
 #include "hw_spi.h"
 
-
+#warning This driver must be test before use!
 /**
  * Global variable for store current and previous data
  * flash memory page address during operation of writing.
@@ -216,8 +216,7 @@ static uint8_t dataflash_cmd(dataflash_t page_addr, dataflashOffset_t byte_addr,
        stat = dataflash_stat();
 
        /*
-        * Data flash has been terminate a sent command, and so
-        * disable CS.
+        * Data flash has completed a bus cycle, so disable CS.
         */
        CS_DISABLE();
 
@@ -363,7 +362,7 @@ static bool dataflash_close(UNUSED_ARG(struct _KFile *,fd))
  * Move \a fd file seek position of \a offset bytes
  * from current position.
  */
-static int32_t dataflash_seek(struct _KFile *fd, int32_t offset, KSeekMode whence)
+static int32_t dataflash_seek(struct _KFile *fd, kfile_off_t offset, KSeekMode whence)
 {
        uint32_t seek_pos;
 
@@ -544,7 +543,7 @@ void dataflash_test(void)
        dataflash_init(&fd);
 
        uint8_t test_buf[] = "0123456789 Develer s.r.l.";
-       uint8_t cmp_buf[];
+       uint8_t cmp_buf[sizeof(test_buf)];
 
        int tb_len = sizeof(test_buf);
        int tmp_len = 0;
@@ -557,32 +556,32 @@ void dataflash_test(void)
        /*  TEST 1 */
 
        // Seek to addr 0
-       if (!fd.seek(&fd, 0, SEEK_SET))
+       if (!fd.seek(&fd, 0, KSM_SEEK_SET))
                goto dataflash_test_end;
 
        // Test flash write to address 0 (page 0)
-       tmp_len = fd->write(&fd, test_buf, len_tb)
-       if (len_tb != tmp_len)
+       tmp_len = fd.write(&fd, test_buf, tb_len);
+       if (tb_len != tmp_len)
        {
                kprintf("Test 1: Wrong numer write bytes! expecteded [%d], write [%d]\n", tb_len, tmp_len);
                goto dataflash_test_end;
        }
 
        // Seek to addr 0
-       if (fd.seek(&fd, 0, SEEK_SET) != 0)
+       if (fd.seek(&fd, 0, KSM_SEEK_SET) != 0)
                goto dataflash_test_end;
        tmp_len = 0;
 
        // Test flash read to address 0 (page 0)
-       tmp_len = fd->read(&fd, cmp_buf, len_tb);
-       if (len_tb != tmp_len)
+       tmp_len = fd.read(&fd, cmp_buf, tb_len);
+       if (tb_len != tmp_len)
        {
                kprintf("Test 1: Wrong numer read bytes! expecteded [%d], read [%d]\n", tb_len, tmp_len);
                goto dataflash_test_end;
        }
 
        // Compare if they are equal
-       if ((memcmp(cmp_buf,test_buf, len_tb) == 0)
+       if ((memcmp(cmp_buf,test_buf, tb_len) == 0))
        {
                kprintf("Test 1: Readed test buf don't much!\n");
                goto dataflash_test_end;
@@ -596,8 +595,8 @@ void dataflash_test(void)
        tmp_len = 0;
 
        // Test flash write at the middle of memory
-       tmp_len = fd->write(&fd, test_buf, len_tb);
-       if (len_tb != tmp_len)
+       tmp_len = fd.write(&fd, test_buf, tb_len);
+       if (tb_len != tmp_len)
        {
                kprintf("Test 2: Wrong numer write bytes! expecteded [%d], write [%d]\n", tb_len, tmp_len);
                goto dataflash_test_end;
@@ -609,15 +608,15 @@ void dataflash_test(void)
        tmp_len = 0;
 
        // Test flash read  at the middle of memory
-       tmp_len = fd->read(&fd, cmp_buf, len_tb);
-       if (len_tb != tmp_len)
+       tmp_len = fd.read(&fd, cmp_buf, tb_len);
+       if (tb_len != tmp_len)
        {
                kprintf("Test 2: Wrong numer read bytes! expecteded [%d], read [%d]\n", tb_len, tmp_len);
                goto dataflash_test_end;
        }
 
        // Compare if they are equal
-       if ((memcmp(cmp_buf,test_buf, len_tb) == 0)
+       if ((memcmp(cmp_buf,test_buf, tb_len) == 0))
        {
                kprintf("Test 2: Readed test buf don't much!\n");
                goto dataflash_test_end;
@@ -625,33 +624,33 @@ void dataflash_test(void)
        /*  TEST 3 */
 
        // Go to end of data flash.
-       if(!fd.seek(&fd, ((dataflashAddr_t)DFLASH_PAGE_SIZE * (dataflashAddr_t)DFLASH_NUM_PAGE) - len_tb, SEEK_END));
+       if(!fd.seek(&fd, ((dataflashAddr_t)DFLASH_PAGE_SIZE * (dataflashAddr_t)DFLASH_NUM_PAGE) - len_tb, SEEK_END))
                goto dataflash_test_end;
        tmp_len = 0;
 
        // Test flash write at the end of memory
-       tmp_len = fd->write(&fd, test_buf, len_tb);
-       if (len_tb != tmp_len)
+       tmp_len = fd.write(&fd, test_buf, tb_len);
+       if (tb_len != tmp_len)
        {
                kprintf("Test 3: Wrong numer write bytes! expecteded [%d], write [%d]\n", tb_len, tmp_len);
                goto dataflash_test_end;
        }
 
        // Go to end of data flash.
-       if(!fd.seek(&fd, ((dataflashAddr_t)DFLASH_PAGE_SIZE * (dataflashAddr_t)DFLASH_NUM_PAGE) - len_tb, SEEK_END));
+       if(!fd.seek(&fd, ((dataflashAddr_t)DFLASH_PAGE_SIZE * (dataflashAddr_t)DFLASH_NUM_PAGE) - len_tb, SEEK_END))
                goto dataflash_test_end;
        tmp_len = 0
 
        // Test flash read at the end of memory
-       tmp_len = fd->read(&fd, cmp_buf, len_tb);
-       if (len_tb != tmp_len)
+       tmp_len = fd.read(&fd, cmp_buf, tb_len);
+       if (tb_len != tmp_len)
        {
                kprintf("Test 3: Wrong numer read bytes! expecteded [%d], read [%d]\n", tb_len, tmp_len);
                goto dataflash_test_end;
        }
 
        // Compare if they are equal
-       if ((memcmp(cmp_buf,test_buf, len_tb) == 0)
+       if ((memcmp(cmp_buf,test_buf, tb_len) == 0))
        {
                kprintf("Test 3: Readed test buf don't much!\n");
                goto dataflash_test_end;