-/*!
+/**
* \file
* <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
* Copyright 2003, 2004, 2005 Develer S.r.l. (http://www.develer.com/)
- * This file is part of DevLib - See README.devlib for information.
+ *
* -->
*
* \brief Driver for the 24xx16 and 24xx256 I2C EEPROMS (implementation)
* \author Bernardo Innocenti <bernie@develer.com>
*/
-/*#*
- *#* $Log$
- *#* Revision 1.19 2006/03/20 17:49:50 bernie
- *#* Make the TWI driver more generic to work with devices other than EEPROMS.
- *#*
- *#* Revision 1.18 2005/11/27 23:33:40 bernie
- *#* Use appconfig.h instead of cfg/config.h.
- *#*
- *#* Revision 1.17 2005/04/11 19:10:27 bernie
- *#* Include top-level headers from cfg/ subdir.
- *#*
- *#* Revision 1.16 2005/03/01 23:25:09 bernie
- *#* Prune CVS log.
- *#*
- *#* Revision 1.11 2004/10/26 08:35:31 bernie
- *#* Reset watchdog for long operations.
- *#*
- *#* Revision 1.10 2004/09/20 03:31:22 bernie
- *#* Sanitize for C++.
- *#*
- *#* Revision 1.9 2004/09/14 21:03:46 bernie
- *#* Use debug.h instead of kdebug.h.
- *#*/
-
#include "eeprom.h"
#include <cfg/debug.h>
#include <appconfig.h> // CONFIG_EEPROM_VERIFY
#include <cfg/macros.h> // MIN()
-#include <drv/twi.h>
+#include <cpu/attr.h>
+#include CPU_HEADER(twi)
#include <drv/wdt.h>
#include <mware/byteorder.h> // cpu_to_be16()
-/*!
+/**
* Copy \c count bytes from buffer \c buf to
* eeprom at address \c addr.
*/
#if CONFIG_EEPROM_VERIFY
-/*!
+/**
* Check that the contents of an EEPROM range
* match with a provided data buffer.
*
}
-/*!
+/**
* Copy \c count bytes at address \c addr
* from eeprom to RAM to buffer \c buf.
*
}
-/*!
+/**
* Write a single character \a c at address \a addr.
*/
bool eeprom_write_char(e2addr_t addr, char c)
}
-/*!
+/**
* Read a single character at address \a addr.
*
* \return the requested character or -1 in case of failure.
}
-/*!
+/**
* Erase specified part of eeprom, writing 0xFF.
*
* \param addr starting address
}
-/*!
+/**
* Initialize TWI module.
*/
void eeprom_init(void)