Refactor to use new protocol module and sipo.

[bertos.git] / drv / eeprom.h

diff --git a/drv/eeprom.h b/drv/eeprom.h
deleted file mode 100644 (file)
index 5e3f78a..0000000
--- a/drv/eeprom.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2003, 2004 Develer S.r.l. (http://www.develer.com/)
- *
- * -->
- *
- * \version $Id$
- *
- * \author Stefano Fedrigo <aleph@develer.com>
- * \author Bernardo Innocenti <bernie@develer.com>
- *
- * \brief Driver for the 24xx16 and 24xx256 I2C EEPROMS (interface)
- */
-
-#ifndef DRV_EEPROM_H
-#define DRV_EEPROM_H
-
-#include <cfg/compiler.h>
-#include <appconfig.h>
-
-/**
- * \name Values for CONFIG_EEPROM_TYPE
- * \{
- */
-#define EEPROM_24XX16 1
-#define EEPROM_24XX256 2
-/*\}*/
-
-#if CONFIG_EEPROM_TYPE == EEPROM_24XX16
-       #define EEPROM_BLKSIZE   0x10 ///< Eeprom block size (16byte)
-       #define EEPROM_SIZE     0x800 ///< Eeprom total size (2kB)
-#elif CONFIG_EEPROM_TYPE == EEPROM_24XX256
-       #define EEPROM_BLKSIZE   0x40 ///< Eeprom block size (64byte)
-       #define EEPROM_SIZE    0x8000 ///< Eeprom total size (32kB)
-#else
-       #error Unsupported EEPROM type.
-#endif
-
-/// Type for EEPROM addresses
-typedef uint16_t e2addr_t;
-
-/**
- * Macro for E2Layout offset calculation
- *
- * \note We can't just use offsetof() here because we could use
- *       non-constant expressions to access array elements.
- *
- * \note E2Layout is a structure that must be defined in user files.
- */
-#define e2addr(x) ((e2addr_t)&(((struct E2Layout *)0)->x))
-
-
-bool eeprom_write(e2addr_t addr, const void *buf, size_t count);
-bool eeprom_read(e2addr_t addr, void *buf, size_t count);
-bool eeprom_write_char(e2addr_t addr, char c);
-int eeprom_read_char(e2addr_t addr);
-void eeprom_erase(e2addr_t addr, size_t count);
-void eeprom_init(void);
-void eeprom_test(void);
-
-#endif /* DRV_EEPROM_H */