+++ /dev/null
-/**
- * \file
- * <!--
- * Copyright 2007 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief Self programming routines.
- *
- * \version $Id$
- * \author Francesco Sacchi <batt@develer.com>
- * \author Daniele Basile <asterix@develer.com>
- *
- * This module implements a kfile-like access for Atmel avr
- * internal flash.
- * Internal flash writing access is controlled by BOOTSZ fuses, check
- * datasheet for details.
- */
-
-#include "flash_avr.h"
-
-#include <string.h>
-
-#include <drv/wdt.h>
-#include <cfg/macros.h> // MIN()
-#include <cfg/compiler.h>
-#include <cfg/debug.h>
-
-#include <avr/io.h>
-#include <avr/boot.h>
-#include <avr/pgmspace.h>
-
-typedef uint16_t avr_page_addr_t;
-typedef uint16_t avr_page_t;
-
-/**
- * Temporary buffer cointaing data block to
- * write on flash.
- */
-static uint8_t page_buf[SPM_PAGESIZE];
-
-bool page_modified; /// Flag for checking if current page is modified.
-
-/**
- * Current buffered page.
- */
-static avr_page_t curr_page = 0;
-
-/**
- * Write current buffered page in flash memory (if modified).
- * This function erase flash memory page before writing.
- */
-static void avrflash_flush(void)
-{
- if (page_modified)
- {
- kprintf("Flushing page %d\n", curr_page);
-
- boot_spm_busy_wait(); // Wait while the SPM instruction is busy.
-
- kprintf("Filling temparary page buffer...");
- /* Fill the temporary buffer of the AVR */
- for (avr_page_addr_t page_addr = 0; page_addr < SPM_PAGESIZE; page_addr += 2)
- {
- uint16_t word = ((uint16_t)page_buf[page_addr + 1] << 8) | page_buf[page_addr];
-
- ATOMIC(boot_page_fill(page_addr, word));
- }
- kprintf("Done.\n");
-
- wdt_reset();
-
- kprintf("Erasing page, addr %d...", curr_page * SPM_PAGESIZE);
-
- /* Page erase */
- ATOMIC(boot_page_erase(curr_page * SPM_PAGESIZE));
-
- /* Wait until the memory is erased. */
- boot_spm_busy_wait();
-
- kprintf("Done.\n");
- kprintf("Writing page, addr %d...", curr_page * SPM_PAGESIZE);
-
- /* Store buffer in flash page. */
- ATOMIC(boot_page_write(curr_page * SPM_PAGESIZE));
- boot_spm_busy_wait(); // Wait while the SPM instruction is busy.
-
- /*
- * Reenable RWW-section again. We need this if we want to jump back
- * to the application after bootloading.
- */
- ATOMIC(boot_rww_enable());
-
- page_modified = false;
- kprintf("Done.\n");
- }
-}
-
-
-/**
- * Check current page and if \a page is different, load it in
- * temporary buffer.
- */
-static void avrflash_loadPage(avr_page_t page)
-{
- if (page != curr_page)
- {
- avrflash_flush();
- // Load page
- memcpy_P(page_buf, (const char *)(page * SPM_PAGESIZE), SPM_PAGESIZE);
- curr_page = page;
- kprintf("Loaded page %d\n", curr_page);
- }
-}
-
-/**
- * Write program memory.
- * Write \a size bytes from buffer \a _buf to file \a *fd
- * \note Write operations are buffered.
- */
-static size_t avrflash_write(struct _KFile *fd, const void *_buf, size_t size)
-{
- const uint8_t *buf =(const uint8_t *)_buf;
-
- avr_page_t page;
- avr_page_addr_t page_addr;
- size_t total_write = 0;
-
- ASSERT(fd->seek_pos + size <= fd->size);
- size = MIN((uint32_t)size, fd->size - fd->seek_pos);
-
- kprintf("Writing at pos[%d]\n", fd->seek_pos);
- while (size)
- {
- page = fd->seek_pos / SPM_PAGESIZE;
- page_addr = fd->seek_pos % SPM_PAGESIZE;
-
- avrflash_loadPage(page);
-
- size_t wr_len = MIN(size, SPM_PAGESIZE - page_addr);
- memcpy(page_buf + page_addr, buf, wr_len);
- page_modified = true;
-
- buf += wr_len;
- fd->seek_pos += wr_len;
- size -= wr_len;
- total_write += wr_len;
- }
- kprintf("written %d bytes\n", total_write);
- return total_write;
-}
-
-/**
- * Open flash file \a *fd
- * \a name and \a mode are unused, cause flash memory is
- * threated like one file.
- */
-static bool avrflash_open(struct _KFile *fd, UNUSED_ARG(const char *, name), UNUSED_ARG(int, mode))
-{
- curr_page = 0;
- memcpy_P(page_buf, (const char *)(curr_page * SPM_PAGESIZE), SPM_PAGESIZE);
-
- fd->seek_pos = 0;
- fd->size = (uint16_t)(FLASHEND - CONFIG_BOOT_SIZE + 1);
- page_modified = false;
-
- kprintf("Flash file opened\n");
- return true;
-}
-
-/**
- * Close file \a *fd
- */
-static bool avrflash_close(UNUSED_ARG(struct _KFile *,fd))
-{
- avrflash_flush();
- kprintf("Flash file closed\n");
- return true;
-}
-
-/**
- * Move \a *fd file seek position of \a offset bytes
- * from current position.
- */
-static bool avrflash_seek(struct _KFile *fd, int32_t offset)
-{
- ASSERT(fd->seek_pos + offset <= fd->size);
-
- /* Bound check */
- if (fd->seek_pos + offset > fd->size)
- return false;
-
- fd->seek_pos += offset;
- kprintf("Flash seek to [%d]\n", fd->seek_pos);
-
- return true;
-}
-
-/**
- * Read from file \a *fd \a size bytes and put it in buffer \a *buf
- * \return the number of bytes read.
- */
-static size_t avrflash_read(struct _KFile *fd, void *buf, size_t size)
-{
- ASSERT(fd->seek_pos + size <= fd->size);
- size = MIN((uint32_t)size, fd->size - fd->seek_pos);
-
- kprintf("Reading at pos[%d]\n", fd->seek_pos);
- // Flush current buffered page (if modified).
- avrflash_flush();
-
- /*
- * AVR pointers are 16 bits wide, this hack is needed to avoid
- * compiler warning, cause fd->seek_pos is a 32bit offset.
- */
- const uint8_t *pgm_addr = (const uint8_t *)0;
- pgm_addr += fd->seek_pos;
-
- memcpy_P(buf, pgm_addr, size);
- fd->seek_pos += size;
- kprintf("Read %d bytes\n", size);
- return size;
-}
-
-/**
- * Init AVR flash read/write file.
- */
-void avrflash_init(struct _KFile *fd)
-{
- // Set up flash programming functions.
- fd.open = avrflash_open;
- fd.close = avrflash_close;
- fd.read = avrflash_read;
- fd.write = avrflash_write;
- fd.seek = avrflash_seek;
-}
-
-#if CONFIG_TEST
-
-#define TEST_SIZE 683
-#define ONE_BYTE_TEST_ADDRESS 347
-
-uint8_t test_buf[TEST_SIZE];
-uint8_t save_buf[TEST_SIZE];
-
-/**
- * Program memory read/write subtest.
- * Try to write/read in the same \param f file location \param _size bytes.
- * \return true if all is ok, false otherwise
- * \note Restore file position at exit (if no error)
- * \note Test buffer \param buf must be filled with
- * the following statement:
- * <pre>
- * buf[i] = i & 0xff
- * </pre>
- */
-static bool avrflash_rwTest(KFile *f, uint8_t *buf, size_t _size)
-{
- int32_t size = _size;
- // Write test buffer
- if (f->write(f, buf, size) != size)
- return false;
- f->seek(f, -size);
-
- // Reset test buffer
- memset(buf, 0, size);
-
- // Read flash in test buffer
- if (f->read(f, buf, size) != size)
- return false;
- f->seek(f, -size);
-
- // Check test result
- for (size_t i = 0; i < size; i++)
- if (buf[i] != (i & 0xff))
- return false;
-
- return true;
-}
-
-/**
- * Test for program memory read/write.
- */
-bool avrflash_test(void)
-{
- KFile fd;
-
- // Set up flash programming functions.
- avrflash_init(&fd);
-
- // Fill in test buffer
- for (int i = 0; i < TEST_SIZE; i++)
- test_buf[i] = (i & 0xff);
-
- // Open flash
- fd.open(&fd, NULL, 0);
- // Save flash content (for later restore).
- fd.read(&fd, save_buf, sizeof(save_buf));
- fd.seek(&fd, -TEST_SIZE);
-
- // Test flash read/write to address 0..TEST_SIZE
- if (!avrflash_rwTest(&fd, test_buf, TEST_SIZE))
- goto avrflash_test_end;
-
- // One byte read/write test
- fd.seek(&fd, ONE_BYTE_TEST_ADDRESS); // Random address
- if (!avrflash_rwTest(&fd, test_buf, 1))
- goto avrflash_test_end;
- fd.seek(&fd, -(int32_t)ONE_BYTE_TEST_ADDRESS);
-
- // Restore old flash data
- if (fd.write(&fd, save_buf, sizeof(test_buf)) != TEST_SIZE)
- goto avrflash_test_end;
- fd.seek(&fd, -TEST_SIZE);
-
- // Go to the Flash end
- fd.seek(&fd, fd.size - TEST_SIZE);
- // Save flash content (for later restore).
- fd.read(&fd, save_buf, sizeof(save_buf));
- fd.seek(&fd, -TEST_SIZE);
-
- // Test flash read/write to address (FLASHEND - TEST_SIZE) ... FLASHEND
- if (!avrflash_rwTest(&fd, test_buf, TEST_SIZE))
- goto avrflash_test_end;
-
- // Go to half test size.
- fd.seek(&fd, (TEST_SIZE / 2));
-
- // This test should FAIL, cause we try to write over file end.
- if (avrflash_rwTest(&fd, test_buf, TEST_SIZE))
- goto avrflash_test_end;
-
- fd.seek(&fd, -TEST_SIZE);
- // Restore old flash data
- fd.write(&fd, save_buf, TEST_SIZE);
-
- fd.close(&fd);
- return true;
-
-avrflash_test_end:
- fd.close(&fd);
- return false;
-}
-
-#endif