-/*!
+/**
* \file
* <!--
- * Copyright 2003,2004 Develer S.r.l. (http://www.develer.com/)
- * Copyright 2000,2001,2002 Bernardo Innocenti <bernie@codewiz.org>
- * This file is part of DevLib - See devlib/README for information.
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2007 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2000, 2001, 2002 Bernardo Innocenti <bernie@codewiz.org>
+ *
* -->
*
- * \brief General pourpose debug functions.
+ * \brief General pourpose debug support for embedded systems (implementation).
*
* \version $Id$
- *
* \author Bernardo Innocenti <bernie@develer.com>
* \author Stefano Fedrigo <aleph@develer.com>
*/
-/*
- * $Log$
- * Revision 1.3 2004/06/03 11:27:09 bernie
- * Add dual-license information.
- *
- * Revision 1.2 2004/05/23 18:21:53 bernie
- * Trim CVS logs and cleanup header info.
- *
- */
-#include "kdebug.h"
-#include "hw.h"
-#include "config.h"
+#include <cfg/debug.h>
+#include <cpu/irq.h>
+#include <cpu/attr.h>
+#include <cpu/types.h>
+#include <cfg/macros.h> /* for BV() */
+#include <appconfig.h>
+#warning what about these?
+//#include <hw_cpu.h> /* for CLOCK_FREQ */
+//#include <hw_ser.h> /* Required for bus macros overrides */
#include <mware/formatwr.h> /* for _formatted_write() */
+#include <mware/pgm.h>
#ifdef _DEBUG
-#if defined(_EMUL)
- #include <stdio.h>
- #define KDBG_WAIT_READY() do {/*nop*/} while(0)
- #define KDBG_WRITE_CHAR(c) putchar((c))
- #define KDBG_MASK_IRQ(old) do {/*nop*/} while(0)
- #define KDBG_RESTORE_IRQ() do {/*nop*/} while(0)
-#elif defined(__I196__)
- #include "Util196.h"
- #define KDBG_WAIT_READY() do {} while (!(SP_STAT & (SPSF_TX_EMPTY | SPSF_TX_INT)))
- #define KDBG_WRITE_CHAR(c) do { SBUF = (c); } while(0)
- #define KDBG_MASK_IRQ(old) \
- do { \
- (old) = INT_MASK1 & INT1F_TI; \
- INT_MASK1 &= ~INT1F_TI; \
- } while(0)
- #define KDBG_RESTORE_IRQ(old) do { INT_MASK1 |= (old); }
-#elif defined(__AVR__)
- #include <avr/io.h>
- #if CONFIG_KDEBUG_PORT == 0
- #ifndef __AVR_ATmega103__
- #define UCR UCSR0B
- #define UDR UDR0
- #define USR UCSR0A
- #endif
- #define KDBG_WAIT_READY() do { loop_until_bit_is_set(USR, UDRE); } while(0)
- #define KDBG_WRITE_CHAR(c) do { UCR |= BV(TXEN); UDR = (c); } while(0)
- #define KDBG_MASK_IRQ(old) do { (old) = UCR & BV(TXCIE); cbi(UCR, TXCIE); } while(0)
- #define KDBG_RESTORE_IRQ(old) do { UCR |= (old); } while(0)
- #elif CONFIG_KDEBUG_PORT == 1
- #define KDBG_WAIT_READY() do { loop_until_bit_is_set(UCSR1A, UDRE); } while(0)
- #define KDBG_WRITE_CHAR(c) do { UCSR1B |= BV(TXEN); UDR1 = (c); } while(0)
- #define KDBG_MASK_IRQ(old) do { (old) = UCSR1B & BV(TXCIE); cbi(UCSR1B, TXCIE); } while(0)
- #define KDBG_RESTORE_IRQ(old) do { UCSR1B |= (old); } while(0)
- #else
- #error CONFIG_KDEBUG_PORT should be either 0 or 1
- #endif
-#else
- #error Unknown architecture
+#if CPU_HARVARD && !defined(_PROGMEM)
+ #error This module build correctly only in program memory!
#endif
-void kdbg_init(void)
-{
-#if defined(__I196__)
-
- /* Set serial port for 19200bps 8N1 */
- INT_MASK1 &= ~(INT1F_TI | INT1F_RI);
- SP_CON = SPCF_RECEIVE_ENABLE | SPCF_MODE1;
- ioc1_img |= IOC1F_TXD_SEL | IOC1F_EXTINT_SRC;
- IOC1 = ioc1_img;
- BAUD_RATE = 0x33;
- BAUD_RATE = 0x80;
-
-#elif defined(__AVR__)
-
- /* Compute the baud rate */
- uint16_t period = (((CLOCK_FREQ / 16UL) + (CONFIG_KDEBUG_BAUDRATE / 2)) / CONFIG_KDEBUG_BAUDRATE) - 1;
-
- #ifdef __AVR_ATmega64__
- #if CONFIG_KDEBUG_PORT == 0
-
- /* Set the baud rate */
- UBRR0H = (uint8_t)(period>>8);
- UBRR0L = (uint8_t)period;
-
- #elif CONFIG_KDEBUG_PORT == 1
-
- UBRR1H = (uint8_t)(period>>8);
- UBRR1L = (uint8_t)period;
-
- #else
- #error CONFIG_KDEBUG_PORT should be either 0 or 1
- #endif
- #elif defined (__AVR_ATmega103__)
+#if OS_HOSTED
+ #include <stdio.h>
+ #define KDBG_WAIT_READY() do { /*nop*/ } while(0)
+ #define KDBG_WRITE_CHAR(c) putc((c), stderr)
+ #define KDBG_MASK_IRQ(old) do { (void)(old); } while(0)
+ #define KDBG_RESTORE_IRQ(old) do { /*nop*/ } while(0)
+ typedef char kdbg_irqsave_t; /* unused */
- /* Set the baud rate */
- UBRR = (uint8_t)period;
+ #define kdbg_hw_init() do {} while (0) ///< Not needed
- #else
- #error Unknown arch
+ #if CONFIG_KDEBUG_PORT == 666
+ #error BITBANG debug console missing for this platform
#endif
+#else
+ #include CPU_CSOURCE(kdebug)
+#endif
-#endif /* !__I196__ && !__AVR__ */
- kputs("\n\n*** DBG START ***\n");
+void kdbg_init(void)
+{
+ /* Init debug hw */
+ kdbg_hw_init();
+ kputs("\n\n*** BeRTOS DBG START ***\n");
}
-/*!
+/**
* Output one character to the debug console
*/
-static void kputchar(char c, UNUSED(void *unused))
+static void __kputchar(char c, UNUSED_ARG(void *, unused))
{
/* Poll while serial buffer is still busy */
KDBG_WAIT_READY();
}
-void PGM_FUNC(kprintf)(const char * PGM_ATTR fmt, ...)
+void kputchar(char c)
{
- va_list ap;
+ /* Mask serial TX intr */
+ kdbg_irqsave_t irqsave;
+ KDBG_MASK_IRQ(irqsave);
+
+ __kputchar(c, 0);
+
+ /* Restore serial TX intr */
+ KDBG_RESTORE_IRQ(irqsave);
+}
+
+static void PGM_FUNC(kvprintf)(const char * PGM_ATTR fmt, va_list ap)
+{
+#if CONFIG_PRINTF
/* Mask serial TX intr */
- unsigned char irqsave;
+ kdbg_irqsave_t irqsave;
KDBG_MASK_IRQ(irqsave);
- va_start(ap, fmt);
- PGM_FUNC(_formatted_write)(fmt, kputchar, 0, ap);
- va_end(ap);
+ PGM_FUNC(_formatted_write)(fmt, __kputchar, 0, ap);
/* Restore serial TX intr */
KDBG_RESTORE_IRQ(irqsave);
+#else
+ /* A better than nothing printf() surrogate. */
+ PGM_FUNC(kputs)(fmt);
+#endif /* CONFIG_PRINTF */
}
+void PGM_FUNC(kprintf)(const char * PGM_ATTR fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ PGM_FUNC(kvprintf)(fmt, ap);
+ va_end(ap);
+}
void PGM_FUNC(kputs)(const char * PGM_ATTR str)
{
char c;
/* Mask serial TX intr */
- unsigned char irqsave;
+ kdbg_irqsave_t irqsave;
KDBG_MASK_IRQ(irqsave);
while ((c = PGM_READ_CHAR(str++)))
- kputchar(c, 0);
+ __kputchar(c, 0);
KDBG_RESTORE_IRQ(irqsave);
}
-int PGM_FUNC(__assert)(const char * PGM_ATTR cond, const char *file, int line)
+/**
+ * Cheap function to print small integers without using printf().
+ */
+int kputnum(int num)
+{
+ int output_len = 0;
+ int divisor = 10000;
+ int digit;
+
+ do
+ {
+ digit = num / divisor;
+ num %= divisor;
+
+ if (digit || output_len || divisor == 1)
+ {
+ kputchar(digit + '0');
+ ++output_len;
+ }
+ }
+ while (divisor /= 10);
+
+ return output_len;
+}
+
+
+static void klocation(const char * PGM_ATTR file, int line)
{
PGM_FUNC(kputs)(file);
- PGM_FUNC(kprintf)(PSTR(":%d: Assertion failed: \""), line);
+ kputchar(':');
+ kputnum(line);
+ PGM_FUNC(kputs)(PGM_STR(": "));
+}
+
+int PGM_FUNC(__assert)(const char * PGM_ATTR cond, const char * PGM_ATTR file, int line)
+{
+ klocation(file, line);
+ PGM_FUNC(kputs)(PGM_STR("Assertion failed: "));
PGM_FUNC(kputs)(cond);
- PGM_FUNC(kputs)(PSTR("\"\n"));
+ kputchar('\n');
+ BREAKPOINT;
return 1;
}
+/*
+ * Unfortunately, there's no way to get __func__ in
+ * program memory, so we waste quite a lot of RAM in
+ * AVR and other Harvard processors.
+ */
+void PGM_FUNC(__trace)(const char *name)
+{
+ PGM_FUNC(kprintf)(PGM_STR("%s()\n"), name);
+}
+
+void PGM_FUNC(__tracemsg)(const char *name, const char * PGM_ATTR fmt, ...)
+{
+ va_list ap;
+
+ PGM_FUNC(kprintf)(PGM_STR("%s(): "), name);
+ va_start(ap, fmt);
+ PGM_FUNC(kvprintf)(fmt, ap);
+ va_end(ap);
+ kputchar('\n');
+}
int PGM_FUNC(__invalid_ptr)(void *value, const char * PGM_ATTR name, const char * PGM_ATTR file, int line)
{
- PGM_FUNC(kputs)(file);
- PGM_FUNC(kprintf)(PSTR(":%d: Invalid pointer: "), line);
+ klocation(file, line);
+ PGM_FUNC(kputs)(PGM_STR("Invalid ptr: "));
PGM_FUNC(kputs)(name);
- PGM_FUNC(kprintf)(PSTR(" = 0x%x\n"), value);
+ #if CONFIG_PRINTF
+ PGM_FUNC(kprintf)(PGM_STR(" = 0x%p\n"), value);
+ #else
+ (void)value;
+ kputchar('\n');
+ #endif
return 1;
}
}
-int __check_wall(long *wall, int size, const char *name, const char *file, int line)
+int PGM_FUNC(__check_wall)(long *wall, int size, const char * PGM_ATTR name, const char * PGM_ATTR file, int line)
{
int i, fail = 0;
{
if (wall[i] != WALL_VALUE)
{
- kprintf("%s:%d: Wall broken: %s[%d] (0x%p) = %ld\n",
- file, line, name, i, wall + i, wall[i]);
+ klocation(file, line);
+ PGM_FUNC(kputs)(PGM_STR("Wall broken: "));
+ PGM_FUNC(kputs)(name);
+ #if CONFIG_PRINTF
+ PGM_FUNC(kprintf)(PGM_STR("[%d] (0x%p) = 0x%lx\n"), i, wall + i, wall[i]);
+ #else
+ kputchar('\n');
+ #endif
fail = 1;
}
}
}
-/*!
+#if CONFIG_PRINTF
+
+/**
* Dump binary data in hex
*/
void kdump(const void *_buf, size_t len)
while (len--)
kprintf("%02X", *buf++);
- kputs("\n");
+ kputchar('\n');
}
+#endif /* CONFIG_PRINTF */
+
#endif /* _DEBUG */