* \author Stefano Fedrigo <aleph@develer.com>
*/
-/*
- * $Log$
- * Revision 1.5 2004/06/27 15:20:26 aleph
- * Change UNUSED() macro to accept two arguments: type and name;
- * Add macro GNUC_PREREQ to detect GCC version during build;
- * Some spacing cleanups and typo fix
- *
- * Revision 1.4 2004/06/06 18:09:51 bernie
- * Import DSP56800 changes; Print broken wall bricks in hex.
- *
- * Revision 1.3 2004/06/03 11:27:09 bernie
- * Add dual-license information.
- *
- * Revision 1.2 2004/05/23 18:21:53 bernie
- * Trim CVS logs and cleanup header info.
- *
- */
+/*#*
+ *#* $Log$
+ *#* Revision 1.13 2004/08/29 22:04:26 bernie
+ *#* Convert 485 macros to generic BUS macros;
+ *#* kputchar(): New public function.
+ *#*
+ *#* Revision 1.12 2004/08/25 14:12:08 rasky
+ *#* Aggiornato il comment block dei log RCS
+ *#*
+ *#* Revision 1.11 2004/08/24 16:19:08 bernie
+ *#* kputchar(): New public function; Add missing dummy inlines for \!_DEBUG.
+ *#*
+ *#* Revision 1.10 2004/08/04 15:57:50 rasky
+ *#* Cambiata la putchar per kdebug per DSP56k: la nuova funzione e' quella piu' a basso livello (assembly)
+ *#*
+ *#* Revision 1.9 2004/08/02 20:20:29 aleph
+ *#* Merge from project_ks
+ *#*
+ *#* Revision 1.8 2004/07/30 14:26:33 rasky
+ *#* Semplificato l'output dell'ASSERT
+ *#* Aggiunta ASSERT2 con stringa di help opzionalmente disattivabile
+ *#*
+ *#* Revision 1.7 2004/07/30 14:15:53 rasky
+ *#* Nuovo supporto unificato per detect della CPU
+ *#*
+ *#* Revision 1.6 2004/07/18 21:49:28 bernie
+ *#* Add ATmega8 support.
+ *#*
+ *#* Revision 1.5 2004/06/27 15:20:26 aleph
+ *#* Change UNUSED() macro to accept two arguments: type and name;
+ *#* Add macro GNUC_PREREQ to detect GCC version during build;
+ *#* Some spacing cleanups and typo fix
+ *#*
+ *#* Revision 1.4 2004/06/06 18:09:51 bernie
+ *#* Import DSP56800 changes; Print broken wall bricks in hex.
+ *#*
+ *#* Revision 1.3 2004/06/03 11:27:09 bernie
+ *#* Add dual-license information.
+ *#*
+ *#* Revision 1.2 2004/05/23 18:21:53 bernie
+ *#* Trim CVS logs and cleanup header info.
+ *#*
+ *#*/
#include "kdebug.h"
#include "hw.h"
#if defined(_EMUL)
#include <stdio.h>
- #define KDBG_WAIT_READY() do {/*nop*/} while(0)
+ #define KDBG_WAIT_READY() do { /*nop*/ } while(0)
#define KDBG_WRITE_CHAR(c) putchar((c))
- #define KDBG_MASK_IRQ(old) do {/*nop*/} while(0)
- #define KDBG_RESTORE_IRQ() do {/*nop*/} while(0)
-#elif defined(__I196__)
+ #define KDBG_MASK_IRQ(old) do { (void)(old); } while(0)
+ #define KDBG_RESTORE_IRQ(old) do { /*nop*/ } while(0)
+ typedef char kdbg_irqsave_t; /* unused */
+#elif CPU_I196
#include "Util196.h"
#define KDBG_WAIT_READY() do {} while (!(SP_STAT & (SPSF_TX_EMPTY | SPSF_TX_INT)))
#define KDBG_WRITE_CHAR(c) do { SBUF = (c); } while(0)
INT_MASK1 &= ~INT1F_TI; \
} while(0)
#define KDBG_RESTORE_IRQ(old) do { INT_MASK1 |= (old); }
-#elif defined(__AVR__)
+ typedef uint16_t kdbg_irqsave_t; /* FIXME: unconfirmed */
+#elif CPU_AVR
#include <avr/io.h>
+
#if CONFIG_KDEBUG_PORT == 0
- #ifndef __AVR_ATmega103__
+
+ /*
+ * Support for special bus policies or external transceivers
+ * on UART0 (to be overridden in "hw.h").
+ */
+ #if !defined(KDBG_UART0_BUS_INIT)
+ #if defined(KDBG_UART0_BUS_RX) || defined(KDBG_UART0_BUS_TX)
+ #error KDBG_UART0_BUS_INIT, KDBG_UART0_BUS_RX and KDBG_UART0_BUS_TX must be defined together
+ #endif
+ #define KDBG_UART0_BUS_INIT do {} while (0)
+ #define KDBG_UART0_BUS_TX do {} while (0)
+ #define KDBG_UART0_BUS_RX do {} while (0)
+ #elif !defined(KDBG_UART0_BUS_RX) || !defined(KDBG_UART0_BUS_TX)
+ #error KDBG_UART0_BUS_INIT, KDBG_UART0_BUS_RX and KDBG_UART0_BUS_TX must be defined together
+ #endif
+
+ #if defined(__AVR_ATmega64__)
#define UCR UCSR0B
#define UDR UDR0
#define USR UCSR0A
+ #elif defined(__AVR_ATmega8__)
+ #define UCR UCSRB
+ #define USR UCSRA
#endif
+
#define KDBG_WAIT_READY() do { loop_until_bit_is_set(USR, UDRE); } while(0)
- #define KDBG_WRITE_CHAR(c) do { UCR |= BV(TXEN); UDR = (c); } while(0)
- #define KDBG_MASK_IRQ(old) do { (old) = UCR & BV(TXCIE); cbi(UCR, TXCIE); } while(0)
- #define KDBG_RESTORE_IRQ(old) do { UCR |= (old); } while(0)
+ #define KDBG_WAIT_TXDONE() do { loop_until_bit_is_set(USR, TXC); } while(0)
+ /*
+ * We must clear the TXC flag before sending a new character to allow
+ * KDBG_WAIT_TXDONE() to work properly.
+ *
+ * BUG: if KDBG_WRITE_CHAR() is called after the TXC flag is set by hardware,
+ * a new TXC could be generated after we've cleared it and before the new
+ * character is written to UDR. On a 485 bus, the transceiver will be put
+ * in RX mode while still transmitting the last char.
+ */
+ #define KDBG_WRITE_CHAR(c) do { USR |= BV(TXC); UDR = (c); } while(0)
+
+ #define KDBG_MASK_IRQ(old) do { \
+ KDBG_UART0_BUS_TX; \
+ (old) = UCR; \
+ UCR |= BV(TXEN); \
+ UCR &= ~(BV(TXCIE) | BV(UDRIE)); \
+ } while(0)
+
+ #define KDBG_RESTORE_IRQ(old) do { \
+ KDBG_WAIT_TXDONE(); \
+ KDBG_UART0_BUS_RX; \
+ UCR = (old); \
+ } while(0)
+
+ typedef uint8_t kdbg_irqsave_t;
+
#elif CONFIG_KDEBUG_PORT == 1
+
+ /*
+ * Support for special bus policies or external transceivers
+ * on UART1 (to be overridden in "hw.h").
+ */
+ #ifndef KDBG_UART1_BUS_INIT
+ #if defined(KDBG_UART1_BUS_RX) || defined(KDBG_UART1_BUS_TX)
+ #error KDBG_UART1_BUS_INIT, KDBG_UART1_BUS_RX and KDBG_UART1_BUS_TX must be defined together
+ #endif
+ #define KDBG_UART1_BUS_INIT do {} while (0)
+ #define KDBG_UART1_BUS_TX do {} while (0)
+ #define KDBG_UART1_BUS_RX do {} while (0)
+ #elif !defined(KDBG_UART1_BUS_RX) || !defined(KDBG_UART1_BUS_TX)
+ #error KDBG_UART1_BUS_INIT, KDBG_UART1_BUS_RX and KDBG_UART1_BUS_TX must be defined together
+ #endif
+
#define KDBG_WAIT_READY() do { loop_until_bit_is_set(UCSR1A, UDRE); } while(0)
- #define KDBG_WRITE_CHAR(c) do { UCSR1B |= BV(TXEN); UDR1 = (c); } while(0)
- #define KDBG_MASK_IRQ(old) do { (old) = UCSR1B & BV(TXCIE); cbi(UCSR1B, TXCIE); } while(0)
- #define KDBG_RESTORE_IRQ(old) do { UCSR1B |= (old); } while(0)
+ #define KDBG_WAIT_TXDONE() do { loop_until_bit_is_set(UCSR1A, TXC); } while(0)
+ #define KDBG_WRITE_CHAR(c) do { UCSR1A |= BV(TXC); UDR1 = (c); } while(0)
+
+ #define KDBG_MASK_IRQ(old) do { \
+ KDBG_UART1_BUS_TX; \
+ (old) = UCSR1B; \
+ UCSR1B |= BV(TXEN); \
+ UCSR1B &= ~(BV(TXCIE) | BV(UDRIE)); \
+ } while(0)
+
+ #define KDBG_RESTORE_IRQ(old) do { \
+ KDBG_WAIT_TXDONE(); \
+ KDBG_UART1_BUS_RX; \
+ UCSR1B = (old); \
+ } while(0)
+
+ typedef uint8_t kdbg_irqsave_t;
#else
#error CONFIG_KDEBUG_PORT should be either 0 or 1
#endif
-#elif defined(__MWERKS__) && (defined(__m56800E__) || defined(__m56800__))
+#elif defined(__MWERKS__) && CPU_DSP56K
/* Debugging go through the JTAG interface. The MSL library already
implements the console I/O correctly. */
#include <stdio.h>
- #define KDBG_WAIT_READY()
- #define KDBG_WRITE_CHAR(c) do { char ch=c; fwrite(&ch,1,1,stdout); } while (0)
- #define KDBG_MASK_IRQ(old)
- #define KDBG_RESTORE_IRQ(old)
+ #define KDBG_WAIT_READY() do { } while (0)
+ #define KDBG_WRITE_CHAR(c) __put_char(c, stdout)
+ #define KDBG_MASK_IRQ(old) do { (void)(old); } while (0)
+ #define KDBG_RESTORE_IRQ(old) do { (void)(old); } while (0)
+ typedef uint8_t kdbg_irqsave_t; /* unused */
#else
#error Unknown architecture
#endif
void kdbg_init(void)
{
-#if defined(__I196__)
+#if CPU_I196
/* Set serial port for 19200bps 8N1 */
INT_MASK1 &= ~(INT1F_TI | INT1F_RI);
BAUD_RATE = 0x33;
BAUD_RATE = 0x80;
-#elif defined(__AVR__)
+#elif CPU_AVR
/* Compute the baud rate */
uint16_t period = (((CLOCK_FREQ / 16UL) + (CONFIG_KDEBUG_BAUDRATE / 2)) / CONFIG_KDEBUG_BAUDRATE) - 1;
- #ifdef __AVR_ATmega64__
+ #if defined(__AVR_ATmega64__)
#if CONFIG_KDEBUG_PORT == 0
-
- /* Set the baud rate */
UBRR0H = (uint8_t)(period>>8);
UBRR0L = (uint8_t)period;
-
+ KDBG_UART0_BUS_INIT;
#elif CONFIG_KDEBUG_PORT == 1
-
UBRR1H = (uint8_t)(period>>8);
UBRR1L = (uint8_t)period;
-
+ KDBG_UART1_BUS_INIT;
#else
- #error CONFIG_KDEBUG_PORT should be either 0 or 1
+ #error CONFIG_KDEBUG_PORT must be either 0 or 1
#endif
- #elif defined (__AVR_ATmega103__)
-
- /* Set the baud rate */
+ #elif defined(__AVR_ATmega8__)
+ UBRRH = (uint8_t)(period>>8);
+ UBRRL = (uint8_t)period;
+ #elif defined(__AVR_ATmega103__)
UBRR = (uint8_t)period;
-
+ KDBG_UART0_BUS_INIT;
#else
#error Unknown arch
#endif
-#endif /* !__I196__ && !__AVR__ */
+#endif /* !CPU_I196 && !CPU_AVR */
kputs("\n\n*** DBG START ***\n");
}
/*!
* Output one character to the debug console
*/
-static void kputchar(char c, UNUSED(void *, unused))
+static void __kputchar(char c, UNUSED(void *, unused))
{
/* Poll while serial buffer is still busy */
KDBG_WAIT_READY();
}
+void kputchar(char c)
+{
+ /* Mask serial TX intr */
+ kdbg_irqsave_t irqsave;
+ KDBG_MASK_IRQ(irqsave);
+
+ __kputchar(c, 0);
+
+ /* Restore serial TX intr */
+ KDBG_RESTORE_IRQ(irqsave);
+}
+
+
void PGM_FUNC(kprintf)(const char * PGM_ATTR fmt, ...)
{
va_list ap;
/* Mask serial TX intr */
- unsigned char irqsave;
+ kdbg_irqsave_t irqsave;
KDBG_MASK_IRQ(irqsave);
va_start(ap, fmt);
- PGM_FUNC(_formatted_write)(fmt, kputchar, 0, ap);
+ PGM_FUNC(_formatted_write)(fmt, __kputchar, 0, ap);
va_end(ap);
/* Restore serial TX intr */
char c;
/* Mask serial TX intr */
- unsigned char irqsave;
+ kdbg_irqsave_t irqsave;
KDBG_MASK_IRQ(irqsave);
while ((c = PGM_READ_CHAR(str++)))
- kputchar(c, 0);
+ __kputchar(c, 0);
KDBG_RESTORE_IRQ(irqsave);
}
-int PGM_FUNC(__assert)(const char * PGM_ATTR cond, const char *file, int line)
+int PGM_FUNC(__assert)(const char * PGM_ATTR cond, const char * PGM_ATTR file, int line)
{
PGM_FUNC(kputs)(file);
- PGM_FUNC(kprintf)(PSTR(":%d: Assertion failed: \""), line);
+ PGM_FUNC(kprintf)(PSTR(":%d: Assertion failed: "), line);
PGM_FUNC(kputs)(cond);
- PGM_FUNC(kputs)(PSTR("\"\n"));
+ PGM_FUNC(kputs)(PSTR("\n"));
return 1;
}
while (len--)
kprintf("%02X", *buf++);
- kputs("\n");
+ kputchar('\n');
}
#endif /* _DEBUG */
projects / bertos.git / blobdiff