/*!
* \file
* <!--
- * Copyright 2003,2004 Develer S.r.l. (http://www.develer.com/)
- * Copyright 2000,2001,2002 Bernardo Innocenti <bernie@codewiz.org>
+ * Copyright 2003, 2004 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2000, 2001, 2002 Bernardo Innocenti <bernie@codewiz.org>
* This file is part of DevLib - See devlib/README for information.
* -->
*
- * \brief General pourpose debug functions.
+ * \brief General pourpose debug support for embedded systems (implementation).
*
* \version $Id$
- *
* \author Bernardo Innocenti <bernie@develer.com>
* \author Stefano Fedrigo <aleph@develer.com>
*/
/*#*
*#* $Log$
+ *#* Revision 1.17 2004/10/03 18:41:28 bernie
+ *#* Restore \version header killed by mistake in previous commit.
+ *#*
+ *#* Revision 1.16 2004/10/03 18:40:50 bernie
+ *#* Use new CPU macros.
+ *#*
+ *#* Revision 1.15 2004/09/14 21:03:46 bernie
+ *#* Use debug.h instead of kdebug.h.
+ *#*
+ *#* Revision 1.14 2004/09/06 21:39:56 bernie
+ *#* Allow partial redefinition of BUS macros.
+ *#*
+ *#* Revision 1.13 2004/08/29 22:04:26 bernie
+ *#* Convert 485 macros to generic BUS macros;
+ *#* kputchar(): New public function.
+ *#*
*#* Revision 1.12 2004/08/25 14:12:08 rasky
*#* Aggiornato il comment block dei log RCS
*#*
*#*
*#*/
-#include "kdebug.h"
+#include <debug.h>
+#include <cpu.h>
#include "hw.h"
#include "config.h"
#define KDBG_WAIT_READY() do { /*nop*/ } while(0)
#define KDBG_WRITE_CHAR(c) putchar((c))
#define KDBG_MASK_IRQ(old) do { (void)(old); } while(0)
- #define KDBG_RESTORE_IRQ() do { /*nop*/ } while(0)
- typedef kdbg_irqsave_t char; /* unused */
+ #define KDBG_RESTORE_IRQ(old) do { /*nop*/ } while(0)
+ typedef char kdbg_irqsave_t; /* unused */
#elif CPU_I196
#include "Util196.h"
#define KDBG_WAIT_READY() do {} while (!(SP_STAT & (SPSF_TX_EMPTY | SPSF_TX_INT)))
INT_MASK1 &= ~INT1F_TI; \
} while(0)
#define KDBG_RESTORE_IRQ(old) do { INT_MASK1 |= (old); }
- typedef kdbg_irqsave_t uint16_t; /* FIXME: unconfirmed */
+ typedef uint16_t kdbg_irqsave_t; /* FIXME: unconfirmed */
#elif CPU_AVR
#include <avr/io.h>
+
#if CONFIG_KDEBUG_PORT == 0
- /* External 485 transceiver on UART0 (to be overridden in "hw.h"). */
- #if !defined(SER_UART0_485_INIT)
- #if defined(SER_UART0_485_RX) || defined(SER_UART0_485_TX)
- #error SER_UART0_485_INIT, SER_UART0_485_RX and SER_UART0_485_TX must be defined together
- #endif
- #define SER_UART0_485_INIT do {} while (0)
- #define SER_UART0_485_TX do {} while (0)
- #define SER_UART0_485_RX do {} while (0)
- #elif !defined(SER_UART0_485_RX) || !defined(SER_UART0_485_TX)
- #error SER_UART0_485_INIT, SER_UART0_485_RX and SER_UART0_485_TX must be defined together
+ /*
+ * Support for special bus policies or external transceivers
+ * on UART0 (to be overridden in "hw.h").
+ */
+ #ifndef KDBG_UART0_BUS_INIT
+ #define KDBG_UART0_BUS_INIT do {} while (0)
+ #endif
+ #ifndef KDBG_UART0_BUS_RX
+ #define KDBG_UART0_BUS_RX do {} while (0)
+ #endif
+ #ifndef KDBG_UART0_BUS_TX
+ #define KDBG_UART0_BUS_TX do {} while (0)
#endif
- #if defined(__AVR_ATmega64__)
+ #if CPU_AVR_ATMEGA64
#define UCR UCSR0B
#define UDR UDR0
#define USR UCSR0A
- #elif defined(__AVR_ATmega8__)
+ #elif CPU_AVR_ATMEGA8
#define UCR UCSRB
#define USR UCSRA
+ #else
+ #error Unknown CPU
#endif
#define KDBG_WAIT_READY() do { loop_until_bit_is_set(USR, UDRE); } while(0)
#define KDBG_WAIT_TXDONE() do { loop_until_bit_is_set(USR, TXC); } while(0)
+
/*
- * BUG: before sending a new character the TXC flag is cleared to allow
- * KDBG_WAIT_TXDONE() to work properly, but, if KDBG_WRITE_CHAR() is called
- * after the RXC flag is set by hardware, a new TXC could be generated
- * after we clear it and before the new character is put in UDR. In this
- * case if a 485 is used the transceiver will be put in RX mode while
- * transmitting the last char.
+ * We must clear the TXC flag before sending a new character to allow
+ * KDBG_WAIT_TXDONE() to work properly.
+ *
+ * BUG: if KDBG_WRITE_CHAR() is called after the TXC flag is set by hardware,
+ * a new TXC could be generated after we've cleared it and before the new
+ * character is written to UDR. On a 485 bus, the transceiver will be put
+ * in RX mode while still transmitting the last char.
*/
#define KDBG_WRITE_CHAR(c) do { USR |= BV(TXC); UDR = (c); } while(0)
#define KDBG_MASK_IRQ(old) do { \
- SER_UART0_485_TX; \
(old) = UCR; \
UCR |= BV(TXEN); \
UCR &= ~(BV(TXCIE) | BV(UDRIE)); \
+ KDBG_UART0_BUS_TX; \
} while(0)
#define KDBG_RESTORE_IRQ(old) do { \
KDBG_WAIT_TXDONE(); \
- SER_UART0_485_RX; \
+ KDBG_UART0_BUS_RX; \
UCR = (old); \
} while(0)
- typedef kdbg_irqsave_t uint8_t;
+ typedef uint8_t kdbg_irqsave_t;
#elif CONFIG_KDEBUG_PORT == 1
- /* External 485 transceiver on UART1 (to be overridden in "hw.h"). */
- #ifndef SER_UART1_485_INIT
- #if defined(SER_UART1_485_RX) || defined(SER_UART1_485_TX)
- #error SER_UART1_485_INIT, SER_UART1_485_RX and SER_UART1_485_TX must be defined together
- #endif
- #define SER_UART1_485_INIT do {} while (0)
- #define SER_UART1_485_TX do {} while (0)
- #define SER_UART1_485_RX do {} while (0)
- #elif !defined(SER_UART1_485_RX) || !defined(SER_UART1_485_TX)
- #error SER_UART1_485_INIT, SER_UART1_485_RX and SER_UART1_485_TX must be defined together
+ /*
+ * Support for special bus policies or external transceivers
+ * on UART1 (to be overridden in "hw.h").
+ */
+ #ifndef KDBG_UART1_BUS_INIT
+ #define KDBG_UART1_BUS_INIT do {} while (0)
+ #endif
+ #ifndef KDBG_UART1_BUS_RX
+ #define KDBG_UART1_BUS_RX do {} while (0)
+ #endif
+ #ifndef KDBG_UART1_BUS_TX
+ #define KDBG_UART1_BUS_TX do {} while (0)
#endif
#define KDBG_WAIT_READY() do { loop_until_bit_is_set(UCSR1A, UDRE); } while(0)
#define KDBG_WRITE_CHAR(c) do { UCSR1A |= BV(TXC); UDR1 = (c); } while(0)
#define KDBG_MASK_IRQ(old) do { \
- SER_UART1_485_TX; \
(old) = UCSR1B; \
UCSR1B |= BV(TXEN); \
UCSR1B &= ~(BV(TXCIE) | BV(UDRIE)); \
+ KDBG_UART1_BUS_TX; \
} while(0)
#define KDBG_RESTORE_IRQ(old) do { \
KDBG_WAIT_TXDONE(); \
- SER_UART1_485_RX; \
+ KDBG_UART1_BUS_RX; \
UCSR1B = (old); \
} while(0)
- typedef kdbg_irqsave_t uint8_t;
+ typedef uint8_t kdbg_irqsave_t;
#else
#error CONFIG_KDEBUG_PORT should be either 0 or 1
#endif
#define KDBG_WRITE_CHAR(c) __put_char(c, stdout)
#define KDBG_MASK_IRQ(old) do { (void)(old); } while (0)
#define KDBG_RESTORE_IRQ(old) do { (void)(old); } while (0)
- typedef kdbg_irqsave_t uint8_t; /* unused */
+ typedef uint8_t kdbg_irqsave_t; /* unused */
#else
#error Unknown architecture
#endif
/* Compute the baud rate */
uint16_t period = (((CLOCK_FREQ / 16UL) + (CONFIG_KDEBUG_BAUDRATE / 2)) / CONFIG_KDEBUG_BAUDRATE) - 1;
- #if defined(__AVR_ATmega64__)
+ #if CPU_AVR_ATMEGA64
#if CONFIG_KDEBUG_PORT == 0
UBRR0H = (uint8_t)(period>>8);
UBRR0L = (uint8_t)period;
- SER_UART0_485_INIT;
+ KDBG_UART0_BUS_INIT;
#elif CONFIG_KDEBUG_PORT == 1
UBRR1H = (uint8_t)(period>>8);
UBRR1L = (uint8_t)period;
- SER_UART1_485_INIT;
+ KDBG_UART1_BUS_INIT;
#else
#error CONFIG_KDEBUG_PORT must be either 0 or 1
#endif
- #elif defined(__AVR_ATmega8__)
+ #elif CPU_AVR_ATMEGA8
UBRRH = (uint8_t)(period>>8);
UBRRL = (uint8_t)period;
- #elif defined(__AVR_ATmega103__)
+ #elif CPU_AVR_ATMEGA103
UBRR = (uint8_t)period;
- SER_UART0_485_INIT;
+ KDBG_UART0_BUS_INIT;
#else
- #error Unknown arch
+ #error Unknown CPU
#endif
#endif /* !CPU_I196 && !CPU_AVR */
}
-int PGM_FUNC(__assert)(const char * PGM_ATTR cond, const char *file, int line)
+int PGM_FUNC(__assert)(const char * PGM_ATTR cond, const char * PGM_ATTR file, int line)
{
PGM_FUNC(kputs)(file);
PGM_FUNC(kprintf)(PSTR(":%d: Assertion failed: "), line);
while (len--)
kprintf("%02X", *buf++);
- kputs("\n");
+ kputchar('\n');
}
#endif /* _DEBUG */
projects / bertos.git / blobdiff