-/*!
+/**
* \file
* <!--
- * Copyright 2003, 2004 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2003, 2004, 2005 Develer S.r.l. (http://www.develer.com/)
* Copyright 2000, 2001, 2002 Bernardo Innocenti <bernie@codewiz.org>
- * This file is part of DevLib - See devlib/README for information.
+ * This file is part of DevLib - See README.devlib for information.
* -->
*
* \brief General pourpose debug support for embedded systems (implementation).
/*#*
*#* $Log$
- *#* Revision 1.17 2004/10/03 18:41:28 bernie
- *#* Restore \version header killed by mistake in previous commit.
+ *#* Revision 1.28 2006/07/19 12:56:25 bernie
+ *#* Convert to new Doxygen style.
*#*
- *#* Revision 1.16 2004/10/03 18:40:50 bernie
- *#* Use new CPU macros.
+ *#* Revision 1.27 2006/06/01 12:32:06 marco
+ *#* Updated include reference.
*#*
- *#* Revision 1.15 2004/09/14 21:03:46 bernie
- *#* Use debug.h instead of kdebug.h.
+ *#* Revision 1.26 2006/04/27 05:40:27 bernie
+ *#* Break on assertion failures.
*#*
- *#* Revision 1.14 2004/09/06 21:39:56 bernie
- *#* Allow partial redefinition of BUS macros.
+ *#* Revision 1.25 2005/06/27 21:26:24 bernie
+ *#* Misc PGM fixes.
*#*
- *#* Revision 1.13 2004/08/29 22:04:26 bernie
- *#* Convert 485 macros to generic BUS macros;
- *#* kputchar(): New public function.
+ *#* Revision 1.24 2005/04/12 01:36:37 bernie
+ *#* Add hack to enable TX line at module initialization.
*#*
- *#* Revision 1.12 2004/08/25 14:12:08 rasky
- *#* Aggiornato il comment block dei log RCS
+ *#* Revision 1.23 2005/04/11 19:10:27 bernie
+ *#* Include top-level headers from cfg/ subdir.
*#*
- *#* Revision 1.11 2004/08/24 16:19:08 bernie
- *#* kputchar(): New public function; Add missing dummy inlines for \!_DEBUG.
+ *#* Revision 1.22 2005/02/18 11:18:33 bernie
+ *#* Fixes for Harvard processors from project_ks.
*#*
- *#* Revision 1.10 2004/08/04 15:57:50 rasky
- *#* Cambiata la putchar per kdebug per DSP56k: la nuova funzione e' quella piu' a basso livello (assembly)
+ *#* Revision 1.21 2005/02/16 20:29:48 bernie
+ *#* TRACE(), TRACEMSG(): Reduce code and data footprint.
*#*
- *#* Revision 1.9 2004/08/02 20:20:29 aleph
- *#* Merge from project_ks
- *#*
- *#* Revision 1.8 2004/07/30 14:26:33 rasky
- *#* Semplificato l'output dell'ASSERT
- *#* Aggiunta ASSERT2 con stringa di help opzionalmente disattivabile
- *#*
- *#* Revision 1.7 2004/07/30 14:15:53 rasky
- *#* Nuovo supporto unificato per detect della CPU
- *#*
- *#* Revision 1.6 2004/07/18 21:49:28 bernie
- *#* Add ATmega8 support.
- *#*
- *#* Revision 1.5 2004/06/27 15:20:26 aleph
- *#* Change UNUSED() macro to accept two arguments: type and name;
- *#* Add macro GNUC_PREREQ to detect GCC version during build;
- *#* Some spacing cleanups and typo fix
- *#*
- *#* Revision 1.4 2004/06/06 18:09:51 bernie
- *#* Import DSP56800 changes; Print broken wall bricks in hex.
- *#*
- *#* Revision 1.3 2004/06/03 11:27:09 bernie
- *#* Add dual-license information.
- *#*
- *#* Revision 1.2 2004/05/23 18:21:53 bernie
- *#* Trim CVS logs and cleanup header info.
+ *#* Revision 1.20 2005/01/25 08:36:40 bernie
+ *#* kputnum(): Export.
*#*
+ *#* Revision 1.19 2004/12/31 17:47:45 bernie
+ *#* Rename UNUSED() to UNUSED_ARG().
*#*/
-#include <debug.h>
-#include <cpu.h>
-#include "hw.h"
-#include "config.h"
+#include <cfg/debug.h>
+#include <cfg/cpu.h>
+#include <cfg/macros.h> /* for BV() */
+#include <appconfig.h>
+#include <hw_cpu.h> /* for CLOCK_FREQ */
#include <mware/formatwr.h> /* for _formatted_write() */
/*
* Support for special bus policies or external transceivers
* on UART0 (to be overridden in "hw.h").
+ *
+ * HACK: if we don't set TXEN, kdbg disables the transmitter
+ * after each output statement until the serial driver
+ * is initialized. These glitches confuse the debug
+ * terminal that ends up printing some trash.
*/
#ifndef KDBG_UART0_BUS_INIT
- #define KDBG_UART0_BUS_INIT do {} while (0)
+ #define KDBG_UART0_BUS_INIT do { \
+ UCSR0B = BV(TXEN); \
+ } while (0)
#endif
#ifndef KDBG_UART0_BUS_RX
#define KDBG_UART0_BUS_RX do {} while (0)
#define KDBG_UART0_BUS_TX do {} while (0)
#endif
- #if CPU_AVR_ATMEGA64
+ #if CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128
#define UCR UCSR0B
#define UDR UDR0
#define USR UCSR0A
/*
* Support for special bus policies or external transceivers
* on UART1 (to be overridden in "hw.h").
+ *
+ * HACK: if we don't set TXEN, kdbg disables the transmitter
+ * after each output statement until the serial driver
+ * is initialized. These glitches confuse the debug
+ * terminal that ends up printing some trash.
*/
#ifndef KDBG_UART1_BUS_INIT
- #define KDBG_UART1_BUS_INIT do {} while (0)
+ #define KDBG_UART1_BUS_INIT do { \
+ UCSR1B = BV(TXEN); \
+ } while (0)
#endif
#ifndef KDBG_UART1_BUS_RX
#define KDBG_UART1_BUS_RX do {} while (0)
/* Compute the baud rate */
uint16_t period = (((CLOCK_FREQ / 16UL) + (CONFIG_KDEBUG_BAUDRATE / 2)) / CONFIG_KDEBUG_BAUDRATE) - 1;
- #if CPU_AVR_ATMEGA64
+ #if CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128
#if CONFIG_KDEBUG_PORT == 0
UBRR0H = (uint8_t)(period>>8);
UBRR0L = (uint8_t)period;
}
-/*!
+/**
* Output one character to the debug console
*/
-static void __kputchar(char c, UNUSED(void *, unused))
+static void __kputchar(char c, UNUSED_ARG(void *, unused))
{
/* Poll while serial buffer is still busy */
KDBG_WAIT_READY();
}
-void PGM_FUNC(kprintf)(const char * PGM_ATTR fmt, ...)
+static void PGM_FUNC(kvprintf)(const char * PGM_ATTR fmt, va_list ap)
{
- va_list ap;
-
+#if CONFIG_PRINTF
/* Mask serial TX intr */
kdbg_irqsave_t irqsave;
KDBG_MASK_IRQ(irqsave);
- va_start(ap, fmt);
PGM_FUNC(_formatted_write)(fmt, __kputchar, 0, ap);
- va_end(ap);
/* Restore serial TX intr */
KDBG_RESTORE_IRQ(irqsave);
+#else
+ /* A better than nothing printf() surrogate. */
+ PGM_FUNC(kputs)(fmt);
+#endif /* CONFIG_PRINTF */
}
+void PGM_FUNC(kprintf)(const char * PGM_ATTR fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ PGM_FUNC(kvprintf)(fmt, ap);
+ va_end(ap);
+}
void PGM_FUNC(kputs)(const char * PGM_ATTR str)
{
}
-int PGM_FUNC(__assert)(const char * PGM_ATTR cond, const char * PGM_ATTR file, int line)
+/**
+ * Cheap function to print small integers without using printf().
+ */
+int kputnum(int num)
+{
+ int output_len = 0;
+ int divisor = 10000;
+ int digit;
+
+ do
+ {
+ digit = num / divisor;
+ num %= divisor;
+
+ if (digit || output_len || divisor == 1)
+ {
+ kputchar(digit + '0');
+ ++output_len;
+ }
+ }
+ while (divisor /= 10);
+
+ return output_len;
+}
+
+
+static void klocation(const char * PGM_ATTR file, int line)
{
PGM_FUNC(kputs)(file);
- PGM_FUNC(kprintf)(PSTR(":%d: Assertion failed: "), line);
+ kputchar(':');
+ kputnum(line);
+ PGM_FUNC(kputs)(PGM_STR(": "));
+}
+
+int PGM_FUNC(__assert)(const char * PGM_ATTR cond, const char * PGM_ATTR file, int line)
+{
+ klocation(file, line);
+ PGM_FUNC(kputs)(PGM_STR("Assertion failed: "));
PGM_FUNC(kputs)(cond);
- PGM_FUNC(kputs)(PSTR("\n"));
+ kputchar('\n');
+ BREAKPOINT;
return 1;
}
+/*
+ * Unfortunately, there's no way to get __func__ in
+ * program memory, so we waste quite a lot of RAM in
+ * AVR and other Harvard processors.
+ */
+void PGM_FUNC(__trace)(const char *name)
+{
+ PGM_FUNC(kprintf)(PGM_STR("%s()\n"), name);
+}
+
+void PGM_FUNC(__tracemsg)(const char *name, const char * PGM_ATTR fmt, ...)
+{
+ va_list ap;
+
+ PGM_FUNC(kprintf)(PGM_STR("%s(): "), name);
+ va_start(ap, fmt);
+ PGM_FUNC(kvprintf)(fmt, ap);
+ va_end(ap);
+ kputchar('\n');
+}
int PGM_FUNC(__invalid_ptr)(void *value, const char * PGM_ATTR name, const char * PGM_ATTR file, int line)
{
- PGM_FUNC(kputs)(file);
- PGM_FUNC(kprintf)(PSTR(":%d: Invalid pointer: "), line);
+ klocation(file, line);
+ PGM_FUNC(kputs)(PGM_STR("Invalid ptr: "));
PGM_FUNC(kputs)(name);
- PGM_FUNC(kprintf)(PSTR(" = 0x%x\n"), value);
+ #if CONFIG_PRINTF
+ PGM_FUNC(kprintf)(PGM_STR(" = 0x%x\n"), (unsigned int)value);
+ #else
+ (void)value;
+ kputchar('\n');
+ #endif
return 1;
}
}
-int __check_wall(long *wall, int size, const char *name, const char *file, int line)
+int PGM_FUNC(__check_wall)(long *wall, int size, const char * PGM_ATTR name, const char * PGM_ATTR file, int line)
{
int i, fail = 0;
{
if (wall[i] != WALL_VALUE)
{
- kprintf("%s:%d: Wall broken: %s[%d] (0x%p) = 0x%lx\n",
- file, line, name, i, wall + i, wall[i]);
+ klocation(file, line);
+ PGM_FUNC(kputs)(PGM_STR("Wall broken: "));
+ PGM_FUNC(kputs)(name);
+ #if CONFIG_PRINTF
+ PGM_FUNC(kprintf)(PGM_STR("[%d] (0x%p) = 0x%lx\n"), i, wall + i, wall[i]);
+ #else
+ kputchar('\n');
+ #endif
fail = 1;
}
}
}
-/*!
+#if CONFIG_PRINTF
+
+/**
* Dump binary data in hex
*/
void kdump(const void *_buf, size_t len)
kputchar('\n');
}
+#endif /* CONFIG_PRINTF */
+
#endif /* _DEBUG */