+++ /dev/null
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction. Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License. This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2005 Develer S.r.l. (http://www.develer.com/)
- *
- * -->
- *
- * \brief Hitachi HD44780 and clones LCD module (interface)
- *
- * \version $Id$
- * \author Bernardo Innocenti <bernie@develer.com>
- * \author Stefano Fedrigo <aleph@develer.com>
- */
-
-#ifndef DRV_LCD_HD44_H
-#define DRV_LCD_HD44_H
-
-#include <appconfig.h>
-#include <cfg/compiler.h> /* For stdint types */
-
-/**
- * \name Display dimensions (in chars)
- * \{
- */
-#define LCD_ROWS 2
-#define LCD_COLS 16
-/* \} */
-
-/**
- * \name Hitachi HD44 commands.
- * \{
- */
-#define LCD_CMD_DISPLAY_INI 0x30
-
-#if CONFIG_LCD_4BIT
- #define LCD_CMD_SETFUNC 0x28 /**< 4 bits, 2 lines, 5x7 dots */
-#else
- #define LCD_CMD_SETFUNC 0x38 /**< 8 bits, 2 lines, 5x7 dots */
-#endif
-
-#define LCD_CMD_DISPLAY_ON 0x0F /**< Switch on display */
-#define LCD_CMD_DISPLAY_OFF 0x08 /**< Switch off display */
-#define LCD_CMD_CLEAR 0x01 /**< Clear display */
-#define LCD_CMD_CURSOR_BLOCK 0x0D /**< Show cursor (block) */
-#define LCD_CMD_CURSOR_LINE 0x0F /**< Show cursor (line) */
-#define LCD_CMD_CURSOR_OFF 0x0C /**< Hide cursor */
-#define LCD_CMD_DISPLAYMODE 0x06
-#define LCD_CMD_SET_CGRAMADDR 0x40
-#define LCD_CMD_RESET_DDRAM 0x80
-#define LCD_CMD_SET_DDRAMADDR 0x80
-#define LCD_CMD_DISPLAY_SHIFT 0x18
-#define LCD_CMD_MOVESHIFT_LEFT 0x00
-#define LCD_CMD_MOVESHIFT_RIGHT 0x04
-/*\}*/
-
-/** Type for combined LCD cursor position (x,y). */
-typedef uint8_t lcdpos_t;
-
-void lcd_waitBusy(void);
-void lcd_moveTo(uint8_t addr);
-void lcd_setReg(uint8_t val);
-void lcd_putc(uint8_t a, uint8_t c);
-void lcd_remapChar(const char *glyph, char code);
-void lcd_hw_init(void);
-void lcd_hw_test(void);
-
-#endif /* DRV_LCD_HD44_H */