Refactor BeRTOS to be in his own directory.

[bertos.git] / drv / ntc.h

diff --git a/drv/ntc.h b/drv/ntc.h
deleted file mode 100644 (file)
index 8267d51..0000000
--- a/drv/ntc.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2004, 2005 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief Driver for NTC (reads a temperature through an ADC)
- *
- * \version $Id$
- *
- * \author Giovanni Bajo <rasky@develer.com>
- * \author Francesco Sacchi <batt@develer.com>
- */
-
-/*#*
- *#* $Log$
- *#* Revision 1.2  2006/07/19 12:56:26  bernie
- *#* Convert to new Doxygen style.
- *#*
- *#* Revision 1.1  2005/11/04 17:59:47  bernie
- *#* Import into DevLib.
- *#*
- *#* Revision 1.3  2005/06/10 08:56:47  batt
- *#* Avoid calling DEG_T_TO_DEG().
- *#*
- *#* Revision 1.2  2005/06/10 08:54:58  batt
- *#* Rename deg_t conversion macros to accomplish coding standard.
- *#*
- *#* Revision 1.1  2005/05/24 09:17:58  batt
- *#* Move drivers to top-level.
- *#*/
-
-#ifndef DRV_NTC_H
-#define DRV_NTC_H
-
-#include <ntc_map.h>
-#include <cfg/debug.h>
-#include <cfg/compiler.h>
-
-#define NTC_OPEN_CIRCUIT  -32768
-#define NTC_SHORT_CIRCUIT 32767
-
-typedef int16_t  deg_t; /** type for celsius degrees deg_t = °C * 10 */
-
-/** Macro for converting from deg to deg_t type */
-#define DEG_TO_DEG_T(x)         ((deg_t)((x) * 10))
-
-/** Macro for converting from deg_t to celsius degrees (returns only the integer part) */
-#define DEG_T_TO_INTDEG(x)      ((x) / 10)
-
-/** Macro for converting from deg_t to celsius degrees (returns only the decimal part) */
-#define DEG_T_TO_DECIMALDEG(x)  ((x) % 10)
-
-/** Macro for converting from deg_t to celsius degrees (returns type is float) */
-#define DEG_T_TO_FLOATDEG(x)    ((x) / 10.0)
-
-
-typedef uint32_t res_t; /** type for resistor res_t = Ohm * 100 */
-typedef float    amp_t; /** type for defining amplifications  amp_t = A, where A is a pure number */
-
-DB(extern bool ntc_initialized;)
-
-
-/** Describe a NTC chip */
-typedef struct NtcHwInfo
-{
-       const res_t *resistances; ///< resistances of the NTC (ohms * 100)
-       size_t num_resistances;   ///< number of resistances
-       deg_t degrees_min;        ///< degrees corresponding to the first entry in the table (celsius * 10)
-       deg_t degrees_step;       ///< difference in degrees between two consecutive elements in the table (celsius * 10)
-} NtcHwInfo;
-
-/** Initialize the NTC module */
-void ntc_init(void);
-
-/** Read a single temperature value from the NTC */
-deg_t ntc_read(NtcDev dev);
-
-#endif /* DRV_NTC_H */