Refactor to use new protocol module and sipo.

[bertos.git] / drv / ntc.h

diff --git a/drv/ntc.h b/drv/ntc.h
deleted file mode 100755 (executable)
index bf22136..0000000
--- a/drv/ntc.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*!
- * \file
- * <!--
- * Copyright 2004, 2005 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief Driver for NTC (reads a temperature through an ADC)
- *
- * \version $Id$
- *
- * \author Giovanni Bajo <rasky@develer.com>
- * \author Francesco Sacchi <batt@develer.com>
- */
-
-/*#*
- *#* $Log$
- *#* Revision 1.1  2005/11/04 17:59:47  bernie
- *#* Import into DevLib.
- *#*
- *#* Revision 1.3  2005/06/10 08:56:47  batt
- *#* Avoid calling DEG_T_TO_DEG().
- *#*
- *#* Revision 1.2  2005/06/10 08:54:58  batt
- *#* Rename deg_t conversion macros to accomplish coding standard.
- *#*
- *#* Revision 1.1  2005/05/24 09:17:58  batt
- *#* Move drivers to top-level.
- *#*/
-
-#ifndef DRV_NTC_H
-#define DRV_NTC_H
-
-#include <ntc_map.h>
-#include <cfg/debug.h>
-#include <cfg/compiler.h>
-
-#define NTC_OPEN_CIRCUIT  -32768
-#define NTC_SHORT_CIRCUIT 32767
-
-typedef int16_t  deg_t; /*! type for celsius degrees deg_t = °C * 10 */
-
-/*! Macro for converting from deg to deg_t type */
-#define DEG_TO_DEG_T(x)         ((deg_t)((x) * 10))
-
-/*! Macro for converting from deg_t to celsius degrees (returns only the integer part) */
-#define DEG_T_TO_INTDEG(x)      ((x) / 10)
-
-/*! Macro for converting from deg_t to celsius degrees (returns only the decimal part) */
-#define DEG_T_TO_DECIMALDEG(x)  ((x) % 10)
-
-/*! Macro for converting from deg_t to celsius degrees (returns type is float) */
-#define DEG_T_TO_FLOATDEG(x)    ((x) / 10.0)
-
-
-typedef uint32_t res_t; /*! type for resistor res_t = Ohm * 100 */
-typedef float    amp_t; /*! type for defining amplifications  amp_t = A, where A is a pure number */
-
-DB(extern bool ntc_initialized;)
-
-
-/*! Describe a NTC chip */
-typedef struct NtcHwInfo
-{
-       const res_t *resistances; //!< resistances of the NTC (ohms * 100)
-       size_t num_resistances;   //!< number of resistances
-       deg_t degrees_min;        //!< degrees corresponding to the first entry in the table (celsius * 10)
-       deg_t degrees_step;       //!< difference in degrees between two consecutive elements in the table (celsius * 10)
-} NtcHwInfo;
-
-/*! Initialize the NTC module */
-void ntc_init(void);
-
-/*! Read a single temperature value from the NTC */
-deg_t ntc_read(NtcDev dev);
-
-#endif /* DRV_NTC_H */