Refactor BeRTOS to be in his own directory.

[bertos.git] / drv / pwm_test.c

diff --git a/drv/pwm_test.c b/drv/pwm_test.c
deleted file mode 100644 (file)
index cb2dc84..0000000
--- a/drv/pwm_test.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2005 Develer S.r.l. (http://www.develer.com/)
- * -->
- *
- *
- * \brief Test for PWM driver (implementation)
- *
- * \version $Id$
- *
- * \author Daniele Basile <asterix@develer.com>
- */
-
-#include <cpu/types.h>
-#include <cpu/irq.h>
-
-#include <drv/pwm.h>
-#include <drv/pwm_at91.h>
-
-#include <cfg/macros.h>
-#include <cfg/debug.h>
-
-/*
- * Esample of value for duty cycle"
- *
- * - 100% => 0xFFFFFFFF
- * - 80%  => 0xCCCCCCCC
- * - 75%  => 0xBFFFFFFF
- * - 50%  => 0x7FFFFFFF
- * - 25%  => 0x3FFFFFFF
- * - 33%  => 0x55555555
- * - 16%  => 0x2AAAAAAA
- */
-
-#define PWM_TEST_CH0                     0
-#define PWM_TEST_CH0_FREQ            100UL // 100Hz
-#define PWM_TEST_CH0_DUTY           0xCCCC // 80%
-
-#define PWM_TEST_CH1                     1
-#define PWM_TEST_CH1_FREQ           1000UL  // 1000Hz
-#define PWM_TEST_CH1_DUTY           0xBFFF  // 75%
-
-#define PWM_TEST_CH2                     2
-#define PWM_TEST_CH2_FREQ            12356  // 12356Hz
-#define PWM_TEST_CH2_DUTY           0x7FFF  // 50%
-
-#define PWM_TEST_CH3                     3
-#define PWM_TEST_CH3_FREQ         100000UL  // 100KHz
-#define PWM_TEST_CH3_DUTY           0x5555  // 33%
-
-#define PWM_TEST_CH_SET(index) \
-       do { \
-                       pwm_setFrequency(PWM_TEST_CH##index , PWM_TEST_CH##index##_FREQ); \
-                       pwm_setDuty(PWM_TEST_CH##index, PWM_TEST_CH##index##_DUTY); \
-                       pwm_enable(PWM_TEST_CH##index, true); \
-       } while (0)
-
-/**
- * Test suit for genation of pwm waveform.
- *
- */
-void pwm_test(void)
-{
-
-       pwm_init();
-       kputs("Init pwm..\n");
-
-       PWM_TEST_CH_SET(0);
-       kprintf("Set pwm ch[%d] =>freq[%ld], duty[%d]\n", PWM_TEST_CH0, PWM_TEST_CH0_FREQ, PWM_TEST_CH0_DUTY);
-       PWM_TEST_CH_SET(1);
-       kprintf("Set pwm ch[%d] =>freq[%ld], duty[%d]\n", PWM_TEST_CH1, PWM_TEST_CH1_FREQ, PWM_TEST_CH1_DUTY);
-       PWM_TEST_CH_SET(2);
-       kprintf("Set pwm ch[%d] =>freq[%ld], duty[%d]\n", PWM_TEST_CH2, PWM_TEST_CH2_FREQ, PWM_TEST_CH2_DUTY);
-       PWM_TEST_CH_SET(3);
-       kprintf("Set pwm ch[%d] =>freq[%ld], duty[%d]\n", PWM_TEST_CH3, PWM_TEST_CH3_FREQ, PWM_TEST_CH3_DUTY);
-}
-
-
-
-
-
-