/*!
* \file
* <!--
+ * Copyright 2003, 2004 Develer S.r.l. (http://www.develer.com/)
* Copyright 2000 Bernardo Innocenti <bernie@codewiz.org>
- * Copyright 2003,2004 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
+ * This file is part of DevLib - See devlib/README for information.
* -->
*
* \brief Buffered serial I/O driver
/*
* $Log$
- * Revision 1.1 2004/05/23 18:10:11 bernie
- * Import drv/ modules.
+ * Revision 1.7 2004/07/18 21:49:03 bernie
+ * Make CONFIG_SER_DEFBAUDRATE optional.
*
- * Revision 1.5 2004/05/14 12:47:26 rasky
- * Importato nuovo supporto seriale per AVR da Stefano
+ * Revision 1.6 2004/06/07 15:56:28 aleph
+ * Remove cast-as-lvalue extension abuse
*
- * Revision 1.4 2004/04/29 16:40:23 rasky
- * Durante i busy loop della seriale, chiama la proc_switch() per cambiare processo
+ * Revision 1.5 2004/06/06 16:41:44 bernie
+ * ser_putchar(): Use fifo_push_locked() to fix potential race on 8bit processors.
*
- * Revision 1.3 2004/04/21 17:38:24 rasky
- * New application
+ * Revision 1.4 2004/06/03 11:27:09 bernie
+ * Add dual-license information.
*
- * Revision 1.16 2004/04/03 18:30:49 aleph
- * Move timeout defines in config, private define in .c
+ * Revision 1.3 2004/06/02 21:35:24 aleph
+ * Serial enhancements: interruptible receive handler and 8 bit serial status for AVR; remove volatile attribute to FIFOBuffer, useless for new fifobuf routens
*
- * Revision 1.15 2004/03/29 17:01:02 aleph
- * Add function to set serial parity, fix it when ser_open is used
+ * Revision 1.2 2004/05/23 18:21:53 bernie
+ * Trim CVS logs and cleanup header info.
*
- * Revision 1.14 2004/03/29 16:19:33 aleph
- * Add ser_cleanup function; Various code improvements
- *
- * Revision 1.13 2004/03/24 15:48:53 bernie
- * Remove Copyright messages from Doxygen output
*/
#include <mware/formatwr.h>
while (fifo_isfull_locked(&port->txfifo));
}
- fifo_push(&port->txfifo, (unsigned char)c);
+ fifo_push_locked(&port->txfifo, (unsigned char)c);
/* (re)trigger tx interrupt */
port->hw->table->enabletxirq(port->hw);
* \brief Write a buffer to serial.
*
* \return 0 if OK, EOF in case of error.
+ *
+ * \todo Optimize with fifo_pushblock()
*/
-int ser_write(struct Serial *port, const void *buf, size_t len)
+int ser_write(struct Serial *port, const void *_buf, size_t len)
{
+ const char *buf = _buf;
+
while (len--)
{
- if (ser_putchar(*((const char *)buf)++, port) == EOF)
+ if (ser_putchar(*buf++, port) == EOF)
return EOF;
}
return 0;
#if defined(CONFIG_SER_RXTIMEOUT) || defined(CONFIG_SER_TXTIMEOUT)
ser_settimeouts(port, CONFIG_SER_RXTIMEOUT, CONFIG_SER_TXTIMEOUT);
#endif
+#if defined(CONFIG_SER_DEFBAUDRATE)
ser_setbaudrate(port, CONFIG_SER_DEFBAUDRATE);
+#endif
return port;
}
port->is_open = false;
port->hw->table->cleanup(port->hw);
- port->hw = NULL;
+ port->hw = NULL;
}