-/*!
+/**
* \file
* <!--
* Copyright 2003, 2004 Develer S.r.l. (http://www.develer.com/)
* Copyright 2000 Bernardo Innocenti <bernie@codewiz.org>
- * This file is part of DevLib - See devlib/README for information.
+ * This file is part of DevLib - See README.devlib for information.
* -->
*
* \brief AVR UART and SPI I/O driver
/*#*
*#* $Log$
+ *#* Revision 1.34 2006/11/23 13:19:02 batt
+ *#* Add support for ATmega1281.
+ *#*
+ *#* Revision 1.33 2006/09/13 18:21:24 bernie
+ *#* Add configurable SPI pin mapping.
+ *#*
+ *#* Revision 1.32 2006/07/19 12:56:26 bernie
+ *#* Convert to new Doxygen style.
+ *#*
+ *#* Revision 1.31 2006/05/18 00:37:29 bernie
+ *#* Use hw_ser.h instead of ubiquitous hw.h.
+ *#*
+ *#* Revision 1.30 2006/02/17 22:23:06 bernie
+ *#* Update POSIX serial emulator.
+ *#*
+ *#* Revision 1.29 2005/11/27 23:31:48 bernie
+ *#* Support avr-libc 1.4.
+ *#*
+ *#* Revision 1.28 2005/11/04 16:20:02 bernie
+ *#* Fix reference to README.devlib in header.
+ *#*
+ *#* Revision 1.27 2005/07/03 15:19:31 bernie
+ *#* Doxygen fix.
+ *#*
+ *#* Revision 1.26 2005/04/11 19:10:27 bernie
+ *#* Include top-level headers from cfg/ subdir.
+ *#*
+ *#* Revision 1.25 2005/01/25 08:37:26 bernie
+ *#* CONFIG_SER_HWHANDSHAKE fixes.
+ *#*
+ *#* Revision 1.24 2005/01/14 00:49:16 aleph
+ *#* Rename callbacks; SerialHardwareVT.txSending: New callback; Add SPI_BUS macros.
+ *#*
+ *#* Revision 1.23 2005/01/11 18:09:07 aleph
+ *#* Add ATmega8 SPI port definitions; Fix transmit complete IRQ bug; add strobe macros to uart1 and spi
+ *#*
+ *#* Revision 1.22 2004/12/31 17:47:45 bernie
+ *#* Rename UNUSED() to UNUSED_ARG().
+ *#*
+ *#* Revision 1.21 2004/12/13 12:07:06 bernie
+ *#* DISABLE_IRQSAVE/ENABLE_IRQRESTORE: Convert to IRQ_SAVE_DISABLE/IRQ_RESTORE.
+ *#*
+ *#* Revision 1.20 2004/12/13 11:51:43 bernie
+ *#* Fix a latent bug with reentrant serial IRQs.
+ *#*
+ *#* Revision 1.19 2004/12/13 11:51:08 bernie
+ *#* DISABLE_INTS/ENABLE_INTS: Convert to IRQ_DISABLE/IRQ_ENABLE.
+ *#*
+ *#* Revision 1.18 2004/12/08 08:03:48 bernie
+ *#* Doxygen fixes.
+ *#*
+ *#* Revision 1.17 2004/10/19 07:52:35 bernie
+ *#* Reset parity bits before overwriting them (Fixed by batt in project_ks).
+ *#*
+ *#* Revision 1.16 2004/10/03 18:45:48 bernie
+ *#* Convert to new-style config macros; Allow compiling with a C++ compiler (mostly).
+ *#*
+ *#* Revision 1.15 2004/09/14 21:05:36 bernie
+ *#* Use debug.h instead of kdebug.h; Use new AVR pin names; Spelling fixes.
+ *#*
*#* Revision 1.14 2004/09/06 21:50:00 bernie
*#* Spelling fixes.
*#*
#include "ser.h"
#include "ser_p.h"
-#include "config.h"
-#include "hw.h" /* Required for bus macros overrides */
-#include <drv/kdebug.h>
+#include <hw_ser.h> /* Required for bus macros overrides */
+#include <hw_cpu.h> /* CLOCK_FREQ */
+#include <appconfig.h>
+
+#include <cfg/debug.h>
#include <drv/timer.h>
#include <mware/fifobuf.h>
-#include <avr/signal.h>
+#include <avr/io.h>
+#if defined(__AVR_LIBC_VERSION__) && (__AVR_LIBC_VERSION__ >= 10400UL)
+ #include <avr/interrupt.h>
+#else
+ #include <avr/signal.h>
+#endif
-/*!
- * \name Hardware handshake (RTS/CTS).
- * \{
- */
-#ifndef RTS_ON
-#define RTS_ON do {} while (0)
-#endif
-#ifndef RTS_OFF
-#define RTS_OFF do {} while (0)
-#endif
-#ifndef IS_CTS_ON
-#define IS_CTS_ON true
+#if !CONFIG_SER_HWHANDSHAKE
+ /**
+ * \name Hardware handshake (RTS/CTS).
+ * \{
+ */
+ #define RTS_ON do {} while (0)
+ #define RTS_OFF do {} while (0)
+ #define IS_CTS_ON true
+ #define EIMSKF_CTS 0 /**< Dummy value, must be overridden */
+ /*\}*/
#endif
-#ifndef EIMSKB_CTS
-#define EIMSKB_CTS 0 /*!< Dummy value, must be overridden */
+
+#if CPU_AVR_ATMEGA1281
+ #define BIT_RXCIE0 RXCIE0
+ #define BIT_RXEN0 RXEN0
+ #define BIT_TXEN0 TXEN0
+ #define BIT_UDRIE0 UDRIE0
+
+ #define BIT_RXCIE1 RXCIE1
+ #define BIT_RXEN1 RXEN1
+ #define BIT_TXEN1 TXEN1
+ #define BIT_UDRIE1 UDRIE1
+#else
+ #define BIT_RXCIE0 RXCIE
+ #define BIT_RXEN0 RXEN
+ #define BIT_TXEN0 TXEN
+ #define BIT_UDRIE0 UDRIE
+
+ #define BIT_RXCIE1 RXCIE
+ #define BIT_RXEN1 RXEN
+ #define BIT_TXEN1 TXEN
+ #define BIT_UDRIE1 UDRIE
#endif
-/*\}*/
-/*!
+/**
* \name Overridable serial bus hooks
*
* These can be redefined in hw.h to implement
* \{
*/
#ifndef SER_UART0_BUS_TXINIT
- /*!
+ /**
* Default TXINIT macro - invoked in uart0_init()
*
* - Enable both the receiver and the transmitter
* - Enable only the RX complete interrupt
*/
#define SER_UART0_BUS_TXINIT do { \
- UCSR0B = BV(RXCIE) | BV(RXEN) | BV(TXEN); \
+ UCSR0B = BV(BIT_RXCIE0) | BV(BIT_RXEN0) | BV(BIT_TXEN0); \
} while (0)
#endif
#ifndef SER_UART0_BUS_TXBEGIN
- /*!
+ /**
* Invoked before starting a transmission
*
* - Enable both the receiver and the transmitter
* - Enable both the RX complete and UDR empty interrupts
*/
#define SER_UART0_BUS_TXBEGIN do { \
- UCSR0B = BV(RXCIE) | BV(UDRIE) | BV(RXEN) | BV(TXEN); \
+ UCSR0B = BV(BIT_RXCIE0) | BV(BIT_UDRIE0) | BV(BIT_RXEN0) | BV(BIT_TXEN0); \
} while (0)
#endif
#ifndef SER_UART0_BUS_TXCHAR
- /*!
+ /**
* Invoked to send one character.
*/
#define SER_UART0_BUS_TXCHAR(c) do { \
#endif
#ifndef SER_UART0_BUS_TXEND
- /*!
+ /**
* Invoked as soon as the txfifo becomes empty
*
* - Keep both the receiver and the transmitter enabled
* - Disable the UDR empty interrupt
*/
#define SER_UART0_BUS_TXEND do { \
- UCSR0B = BV(RXCIE) | BV(RXEN) | BV(TXEN); \
+ UCSR0B = BV(BIT_RXCIE0) | BV(BIT_RXEN0) | BV(BIT_TXEN0); \
} while (0)
#endif
#ifndef SER_UART0_BUS_TXOFF
- /*!
+ /**
* \def SER_UART0_BUS_TXOFF
*
* Invoked after the last character has been transmitted
*
* The default is no action.
*/
+ #ifdef __doxygen__
+ #define SER_UART0_BUS_TXOFF
+ #endif
#endif
#ifndef SER_UART1_BUS_TXINIT
- /*! \sa SER_UART0_BUS_TXINIT */
+ /** \sa SER_UART0_BUS_TXINIT */
#define SER_UART1_BUS_TXINIT do { \
- UCSR1B = BV(RXCIE) | BV(RXEN) | BV(TXEN); \
+ UCSR1B = BV(BIT_RXCIE1) | BV(BIT_RXEN1) | BV(BIT_TXEN1); \
} while (0)
#endif
#ifndef SER_UART1_BUS_TXBEGIN
- /*! \sa SER_UART0_BUS_TXBEGIN */
+ /** \sa SER_UART0_BUS_TXBEGIN */
#define SER_UART1_BUS_TXBEGIN do { \
- UCSR1B = BV(RXCIE) | BV(UDRIE) | BV(RXEN) | BV(TXEN); \
+ UCSR1B = BV(BIT_RXCIE1) | BV(BIT_UDRIE1) | BV(BIT_RXEN1) | BV(BIT_TXEN1); \
} while (0)
#endif
#ifndef SER_UART1_BUS_TXCHAR
- /*! \sa SER_UART0_BUS_TXCHAR */
+ /** \sa SER_UART0_BUS_TXCHAR */
#define SER_UART1_BUS_TXCHAR(c) do { \
UDR1 = (c); \
} while (0)
#endif
#ifndef SER_UART1_BUS_TXEND
- /*! \sa SER_UART0_BUS_TXEND */
+ /** \sa SER_UART0_BUS_TXEND */
#define SER_UART1_BUS_TXEND do { \
- UCSR1B = BV(RXCIE) | BV(RXEN) | BV(TXEN); \
+ UCSR1B = BV(BIT_RXCIE1) | BV(BIT_RXEN1) | BV(BIT_TXEN1); \
} while (0)
#endif
#ifndef SER_UART1_BUS_TXOFF
- /*!
+ /**
* \def SER_UART1_BUS_TXOFF
*
* \see SER_UART0_BUS_TXOFF
*/
+ #ifdef __doxygen__
+ #define SER_UART1_BUS_TXOFF
+ #endif
+#endif
+/*\}*/
+
+
+/**
+ * \name Overridable SPI hooks
+ *
+ * These can be redefined in hw.h to implement
+ * special bus policies such as slave select pin handling, etc.
+ *
+ * \{
+ */
+#ifndef SER_SPI_BUS_TXINIT
+ /**
+ * Default TXINIT macro - invoked in spi_init()
+ * The default is no action.
+ */
+ #define SER_SPI_BUS_TXINIT
+#endif
+
+#ifndef SER_SPI_BUS_TXCLOSE
+ /**
+ * Invoked after the last character has been transmitted.
+ * The default is no action.
+ */
+ #define SER_SPI_BUS_TXCLOSE
#endif
/*\}*/
/* SPI port and pin configuration */
-#define SPI_PORT PORTB
-#define SPI_DDR DDRB
-#define SPI_SCK_BIT PORTB1
-#define SPI_MOSI_BIT PORTB2
-#define SPI_MISO_BIT PORTB3
-
-/* USART registers definitions */
-#if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
+#if CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128 || CPU_AVR_ATMEGA103 || CPU_AVR_ATMEGA1281
+ #define SPI_PORT PORTB
+ #define SPI_DDR DDRB
+ #define SPI_SS_BIT PB0
+ #define SPI_SCK_BIT PB1
+ #define SPI_MOSI_BIT PB2
+ #define SPI_MISO_BIT PB3
+#elif CPU_AVR_ATMEGA8
+ #define SPI_PORT PORTB
+ #define SPI_DDR DDRB
+ #define SPI_SS_BIT PB2
+ #define SPI_SCK_BIT PB5
+ #define SPI_MOSI_BIT PB3
+ #define SPI_MISO_BIT PB4
+#else
+ #error Unknown architecture
+#endif
+
+/* USART register definitions */
+#if CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128 || CPU_AVR_ATMEGA1281
#define AVR_HAS_UART1 1
-#elif defined(__AVR_ATmega8__)
+#elif CPU_AVR_ATMEGA8
#define AVR_HAS_UART1 0
#define UCSR0A UCSRA
#define UCSR0B UCSRB
#define UBRR0H UBRRH
#define SIG_UART0_DATA SIG_UART_DATA
#define SIG_UART0_RECV SIG_UART_RECV
-#elif defined(__AVR_ATmega103__)
+ #define SIG_UART0_TRANS SIG_UART_TRANS
+#elif CPU_AVR_ATMEGA103
#define AVR_HAS_UART1 0
#define UCSR0B UCR
#define UDR0 UDR
#define UBRR0L UBRR
#define SIG_UART0_DATA SIG_UART_DATA
#define SIG_UART0_RECV SIG_UART_RECV
+ #define SIG_UART0_TRANS SIG_UART_TRANS
#else
#error Unknown architecture
#endif
-/*!
+/**
* \def CONFIG_SER_STROBE
*
* This is a debug facility that can be used to
static unsigned char spi_rxbuffer[CONFIG_SPI_RXBUFSIZE];
-/*!
+/**
* Internal hardware state structure
*
* The \a sending variable is true while the transmission
/*
- * These are to trick GCC into *not* using
- * absolute addressing mode when accessing
- * ser_handles, which is very expensive.
+ * These are to trick GCC into *not* using absolute addressing mode
+ * when accessing ser_handles, which is very expensive.
*
- * Accessing through these pointers generates
- * much shorter (and hopefully faster) code.
+ * Accessing through these pointers generates much shorter
+ * (and hopefully faster) code.
*/
struct Serial *ser_uart0 = &ser_handles[SER_UART0];
#if AVR_HAS_UART1
/*
* Callbacks
*/
-static void uart0_init(UNUSED(struct SerialHardware *, _hw), UNUSED(struct Serial *, ser))
+static void uart0_init(
+ UNUSED_ARG(struct SerialHardware *, _hw),
+ UNUSED_ARG(struct Serial *, ser))
{
SER_UART0_BUS_TXINIT;
RTS_ON;
+ SER_STROBE_INIT;
}
-static void uart0_cleanup(UNUSED(struct SerialHardware *, _hw))
+static void uart0_cleanup(UNUSED_ARG(struct SerialHardware *, _hw))
{
UCSR0B = 0;
}
struct AvrSerial *hw = (struct AvrSerial *)_hw;
/*
- * WARNING: racy code here! The tx interrupt
- * sets hw->sending to false when it runs with
- * an empty fifo. The order of the statements
- * in the if-block matters.
+ * WARNING: racy code here! The tx interrupt sets hw->sending to false
+ * when it runs with an empty fifo. The order of statements in the
+ * if-block matters.
*/
if (!hw->sending)
{
}
}
-static void uart0_setbaudrate(UNUSED(struct SerialHardware *, _hw), unsigned long rate)
+static void uart0_setbaudrate(UNUSED_ARG(struct SerialHardware *, _hw), unsigned long rate)
{
/* Compute baud-rate period */
uint16_t period = (((CLOCK_FREQ / 16UL) + (rate / 2)) / rate) - 1;
-#ifndef __AVR_ATmega103__
+#if !CPU_AVR_ATMEGA103
UBRR0H = (period) >> 8;
#endif
UBRR0L = (period);
//DB(kprintf("uart0_setbaudrate(rate=%lu): period=%d\n", rate, period);)
}
-static void uart0_setparity(UNUSED(struct SerialHardware *, _hw), int parity)
+static void uart0_setparity(UNUSED_ARG(struct SerialHardware *, _hw), int parity)
{
-#ifndef __AVR_ATmega103__
- UCSR0C |= (parity) << UPM0;
+#if !CPU_AVR_ATMEGA103
+ UCSR0C = (UCSR0C & ~(BV(UPM01) | BV(UPM00))) | ((parity) << UPM00);
#endif
}
#if AVR_HAS_UART1
-static void uart1_init(UNUSED(struct SerialHardware *, _hw), UNUSED(struct Serial *, ser))
+static void uart1_init(
+ UNUSED_ARG(struct SerialHardware *, _hw),
+ UNUSED_ARG(struct Serial *, ser))
{
SER_UART1_BUS_TXINIT;
RTS_ON;
SER_STROBE_INIT;
}
-static void uart1_cleanup(UNUSED(struct SerialHardware *, _hw))
+static void uart1_cleanup(UNUSED_ARG(struct SerialHardware *, _hw))
{
UCSR1B = 0;
}
}
}
-static void uart1_setbaudrate(UNUSED(struct SerialHardware *, _hw), unsigned long rate)
+static void uart1_setbaudrate(UNUSED_ARG(struct SerialHardware *, _hw), unsigned long rate)
{
/* Compute baud-rate period */
uint16_t period = (((CLOCK_FREQ / 16UL) + (rate / 2)) / rate) - 1;
//DB(kprintf("uart1_setbaudrate(rate=%ld): period=%d\n", rate, period);)
}
-static void uart1_setparity(UNUSED(struct SerialHardware *, _hw), int parity)
+static void uart1_setparity(UNUSED_ARG(struct SerialHardware *, _hw), int parity)
{
- UCSR1C |= (parity) << UPM0;
+ UCSR1C = (UCSR1C & ~(BV(UPM11) | BV(UPM10))) | ((parity) << UPM10);
}
#endif // AVR_HAS_UART1
-static void spi_init(UNUSED(struct SerialHardware *, _hw), UNUSED(struct Serial *, ser))
+static void spi_init(UNUSED_ARG(struct SerialHardware *, _hw), UNUSED_ARG(struct Serial *, ser))
{
/*
* Set MOSI and SCK ports out, MISO in.
* with the KBus serial RX, and the transmitter of the slave boards
* would be unable to drive the line.
*/
- SPI_DDR |= BV(SPI_MOSI_BIT) | BV(SPI_SCK_BIT);
- SPI_DDR &= ~BV(SPI_MISO_BIT);
- /* Enable SPI, IRQ on, Master, CPU_CLOCK/16 */
- SPCR = BV(SPE) | BV(SPIE) | BV(MSTR) | BV(SPR0);
+ ATOMIC(SPI_DDR |= (BV(SPI_MOSI_BIT) | BV(SPI_SCK_BIT)));
+
+ /*
+ * If the SPI master mode is activated and the SS pin is in input and tied low,
+ * the SPI hardware will automatically switch to slave mode!
+ * For proper communication this pins should therefore be:
+ * - as output
+ * - as input but tied high forever!
+ * This driver set the pin as output.
+ */
+ #warning SPI SS pin set as output for proper operation, check schematics for possible conflicts.
+ ATOMIC(SPI_DDR |= BV(SPI_SS_BIT));
+
+ ATOMIC(SPI_DDR &= ~BV(SPI_MISO_BIT));
+ /* Enable SPI, IRQ on, Master */
+ SPCR = BV(SPE) | BV(SPIE) | BV(MSTR);
+
+ /* Set data order */
+ #if CONFIG_SPI_DATA_ORDER == SER_LSB_FIRST
+ SPCR |= BV(DORD);
+ #endif
+
+ /* Set SPI clock rate */
+ #if CONFIG_SPI_CLOCK_DIV == 128
+ SPCR |= (BV(SPR1) | BV(SPR0));
+ #elif (CONFIG_SPI_CLOCK_DIV == 64 || CONFIG_SPI_CLOCK_DIV == 32)
+ SPCR |= BV(SPR1);
+ #elif (CONFIG_SPI_CLOCK_DIV == 16 || CONFIG_SPI_CLOCK_DIV == 8)
+ SPCR |= BV(SPR0);
+ #elif (CONFIG_SPI_CLOCK_DIV == 4 || CONFIG_SPI_CLOCK_DIV == 2)
+ // SPR0 & SDPR1 both at 0
+ #else
+ #error Unsupported SPI clock division factor.
+ #endif
+
+ /* Set SPI2X bit (spi double frequency) */
+ #if (CONFIG_SPI_CLOCK_DIV == 128 || CONFIG_SPI_CLOCK_DIV == 64 \
+ || CONFIG_SPI_CLOCK_DIV == 16 || CONFIG_SPI_CLOCK_DIV == 4)
+ SPSR &= ~BV(SPI2X);
+ #elif (CONFIG_SPI_CLOCK_DIV == 32 || CONFIG_SPI_CLOCK_DIV == 8 || CONFIG_SPI_CLOCK_DIV == 2)
+ SPSR |= BV(SPI2X);
+ #else
+ #error Unsupported SPI clock division factor.
+ #endif
+
+ /* Set clock polarity */
+ #if CONFIG_SPI_CLOCK_POL == 1
+ SPCR |= BV(CPOL);
+ #endif
+
+ /* Set clock phase */
+ #if CONFIG_SPI_CLOCK_PHASE == 1
+ SPCR |= BV(CPHA);
+ #endif
+ SER_SPI_BUS_TXINIT;
+
+ SER_STROBE_INIT;
}
-static void spi_cleanup(UNUSED(struct SerialHardware *, _hw))
+static void spi_cleanup(UNUSED_ARG(struct SerialHardware *, _hw))
{
SPCR = 0;
+
+ SER_SPI_BUS_TXCLOSE;
+
/* Set all pins as inputs */
- SPI_DDR &= ~(BV(SPI_MISO_BIT) | BV(SPI_MOSI_BIT) | BV(SPI_SCK_BIT));
+ ATOMIC(SPI_DDR &= ~(BV(SPI_MISO_BIT) | BV(SPI_MOSI_BIT) | BV(SPI_SCK_BIT) | BV(SPI_SS_BIT)));
}
static void spi_starttx(struct SerialHardware *_hw)
struct AvrSerial *hw = (struct AvrSerial *)_hw;
cpuflags_t flags;
- DISABLE_IRQSAVE(flags);
+ IRQ_SAVE_DISABLE(flags);
/* Send data only if the SPI is not already transmitting */
if (!hw->sending && !fifo_isempty(&ser_spi->txfifo))
SPDR = fifo_pop(&ser_spi->txfifo);
}
- ENABLE_IRQRESTORE(flags);
+ IRQ_RESTORE(flags);
}
-static void spi_setbaudrate(UNUSED(struct SerialHardware *, _hw), UNUSED(unsigned long, rate))
+static void spi_setbaudrate(
+ UNUSED_ARG(struct SerialHardware *, _hw),
+ UNUSED_ARG(unsigned long, rate))
{
// nop
}
-static void spi_setparity(UNUSED(struct SerialHardware *, _hw), UNUSED(int, parity))
+static void spi_setparity(UNUSED_ARG(struct SerialHardware *, _hw), UNUSED_ARG(int, parity))
{
// nop
}
+static bool tx_sending(struct SerialHardware* _hw)
+{
+ struct AvrSerial *hw = (struct AvrSerial *)_hw;
+ return hw->sending;
+}
+
+// FIXME: move into compiler.h? Ditch?
+#if COMPILER_C99
+ #define C99INIT(name,val) .name = val
+#elif defined(__GNUC__)
+ #define C99INIT(name,val) name: val
+#else
+ #warning No designated initializers, double check your code
+ #define C99INIT(name,val) (val)
+#endif
+
/*
* High-level interface data structures
*/
static const struct SerialHardwareVT UART0_VT =
{
- .init = uart0_init,
- .cleanup = uart0_cleanup,
- .setbaudrate = uart0_setbaudrate,
- .setparity = uart0_setparity,
- .enabletxirq = uart0_enabletxirq,
+ C99INIT(init, uart0_init),
+ C99INIT(cleanup, uart0_cleanup),
+ C99INIT(setBaudrate, uart0_setbaudrate),
+ C99INIT(setParity, uart0_setparity),
+ C99INIT(txStart, uart0_enabletxirq),
+ C99INIT(txSending, tx_sending),
};
#if AVR_HAS_UART1
static const struct SerialHardwareVT UART1_VT =
{
- .init = uart1_init,
- .cleanup = uart1_cleanup,
- .setbaudrate = uart1_setbaudrate,
- .setparity = uart1_setparity,
- .enabletxirq = uart1_enabletxirq,
+ C99INIT(init, uart1_init),
+ C99INIT(cleanup, uart1_cleanup),
+ C99INIT(setBaudrate, uart1_setbaudrate),
+ C99INIT(setParity, uart1_setparity),
+ C99INIT(txStart, uart1_enabletxirq),
+ C99INIT(txSending, tx_sending),
};
#endif // AVR_HAS_UART1
static const struct SerialHardwareVT SPI_VT =
{
- .init = spi_init,
- .cleanup = spi_cleanup,
- .setbaudrate = spi_setbaudrate,
- .setparity = spi_setparity,
- .enabletxirq = spi_starttx,
+ C99INIT(init, spi_init),
+ C99INIT(cleanup, spi_cleanup),
+ C99INIT(setBaudrate, spi_setbaudrate),
+ C99INIT(setParity, spi_setparity),
+ C99INIT(txStart, spi_starttx),
+ C99INIT(txSending, tx_sending),
};
static struct AvrSerial UARTDescs[SER_CNT] =
{
{
- .hw = {
- .table = &UART0_VT,
- .txbuffer = uart0_txbuffer,
- .rxbuffer = uart0_rxbuffer,
- .txbuffer_size = CONFIG_UART0_TXBUFSIZE,
- .rxbuffer_size = CONFIG_UART0_RXBUFSIZE,
+ C99INIT(hw, /**/) {
+ C99INIT(table, &UART0_VT),
+ C99INIT(txbuffer, uart0_txbuffer),
+ C99INIT(rxbuffer, uart0_rxbuffer),
+ C99INIT(txbuffer_size, sizeof(uart0_txbuffer)),
+ C99INIT(rxbuffer_size, sizeof(uart0_rxbuffer)),
},
- .sending = false,
+ C99INIT(sending, false),
},
#if AVR_HAS_UART1
{
- .hw = {
- .table = &UART1_VT,
- .txbuffer = uart1_txbuffer,
- .rxbuffer = uart1_rxbuffer,
- .txbuffer_size = CONFIG_UART1_TXBUFSIZE,
- .rxbuffer_size = CONFIG_UART1_RXBUFSIZE,
+ C99INIT(hw, /**/) {
+ C99INIT(table, &UART1_VT),
+ C99INIT(txbuffer, uart1_txbuffer),
+ C99INIT(rxbuffer, uart1_rxbuffer),
+ C99INIT(txbuffer_size, sizeof(uart1_txbuffer)),
+ C99INIT(rxbuffer_size, sizeof(uart1_rxbuffer)),
},
- .sending = false,
+ C99INIT(sending, false),
},
#endif
{
- .hw = {
- .table = &SPI_VT,
- .txbuffer = spi_txbuffer,
- .rxbuffer = spi_rxbuffer,
- .txbuffer_size = CONFIG_SPI_TXBUFSIZE,
- .rxbuffer_size = CONFIG_SPI_RXBUFSIZE,
+ C99INIT(hw, /**/) {
+ C99INIT(table, &SPI_VT),
+ C99INIT(txbuffer, spi_txbuffer),
+ C99INIT(rxbuffer, spi_rxbuffer),
+ C99INIT(txbuffer_size, sizeof(spi_txbuffer)),
+ C99INIT(rxbuffer_size, sizeof(spi_rxbuffer)),
},
- .sending = false,
+ C99INIT(sending, false),
}
};
-struct SerialHardware* ser_hw_getdesc(int unit)
+struct SerialHardware *ser_hw_getdesc(int unit)
{
ASSERT(unit < SER_CNT);
return &UARTDescs[unit].hw;
}
-
/*
* Interrupt handlers
*/
#if CONFIG_SER_HWHANDSHAKE
-//! This interrupt is triggered when the CTS line goes high
+/// This interrupt is triggered when the CTS line goes high
SIGNAL(SIG_CTS)
{
// Re-enable UDR empty interrupt and TX, then disable CTS interrupt
UCSR0B = BV(RXCIE) | BV(UDRIE) | BV(RXEN) | BV(TXEN);
- cbi(EIMSK, EIMSKB_CTS);
+ EIMSK &= ~EIMSKF_CTS;
}
#endif // CONFIG_SER_HWHANDSHAKE
-/*!
+/**
* Serial 0 TX interrupt handler
*/
-SIGNAL(SIG_UART0_DATA)
+SIGNAL(USART0_UDRE_vect)
{
SER_STROBE_ON;
// Disable rx interrupt and tx, enable CTS interrupt
// UNTESTED
UCSR0B = BV(RXCIE) | BV(RXEN) | BV(TXEN);
- sbi(EIFR, EIMSKB_CTS);
- sbi(EIMSK, EIMSKB_CTS);
+ EIFR |= EIMSKF_CTS;
+ EIMSK |= EIMSKF_CTS;
}
#endif
else
}
#ifdef SER_UART0_BUS_TXOFF
-/*!
+/**
* Serial port 0 TX complete interrupt handler.
*
* This IRQ is usually disabled. The UDR-empty interrupt
#if AVR_HAS_UART1
-/*!
+/**
* Serial 1 TX interrupt handler
*/
-SIGNAL(SIG_UART1_DATA)
+SIGNAL(USART1_UDRE_vect)
{
SER_STROBE_ON;
// Disable rx interrupt and tx, enable CTS interrupt
// UNTESTED
UCSR1B = BV(RXCIE) | BV(RXEN) | BV(TXEN);
- sbi(EIFR, EIMSKB_CTS);
- sbi(EIMSK, EIMSKB_CTS);
+ EIFR |= EIMSKF_CTS;
+ EIMSK |= EIMSKF_CTS;
}
#endif
else
}
#ifdef SER_UART1_BUS_TXOFF
-/*!
+/**
* Serial port 1 TX complete interrupt handler.
*
* \sa port 0 TX complete handler.
#endif // AVR_HAS_UART1
-/*!
+/**
* Serial 0 RX complete interrupt handler.
*
* This handler is interruptible.
- * Interrupt are re-enabled as soon as recv complete interrupt is
+ * Interrupt are reenabled as soon as recv complete interrupt is
* disabled. Using INTERRUPT() is troublesome when the serial
* is heavily loaded, because an interrupt could be retriggered
* when executing the handler prologue before RXCIE is disabled.
* RXCIE is cleared. Unfortunately the RXC flag is read-only
* and can't be cleared by code.
*/
-SIGNAL(SIG_UART0_RECV)
+SIGNAL(USART0_RX_vect)
{
SER_STROBE_ON;
/* Disable Recv complete IRQ */
//UCSR0B &= ~BV(RXCIE);
- //ENABLE_INTS;
+ //IRQ_ENABLE;
/* Should be read before UDR */
ser_uart0->status |= UCSR0A & (SERRF_RXSROVERRUN | SERRF_FRAMEERROR);
#endif
}
- /* Re-enable receive complete int */
- //DISABLE_INTS;
+ /* Reenable receive complete int */
+ //IRQ_DISABLE;
//UCSR0B |= BV(RXCIE);
SER_STROBE_OFF;
#if AVR_HAS_UART1
-/*!
+/**
* Serial 1 RX complete interrupt handler.
*
* This handler is interruptible.
- * Interrupt are re-enabled as soon as recv complete interrupt is
+ * Interrupt are reenabled as soon as recv complete interrupt is
* disabled. Using INTERRUPT() is troublesome when the serial
* is heavily loaded, because an interrupt could be retriggered
* when executing the handler prologue before RXCIE is disabled.
*
- * \see SIGNAL(SIG_UART0_RECV)
+ * \see SIGNAL(USART1_RX_vect)
*/
-SIGNAL(SIG_UART1_RECV)
+SIGNAL(USART1_RX_vect)
{
SER_STROBE_ON;
/* Disable Recv complete IRQ */
//UCSR1B &= ~BV(RXCIE);
- //ENABLE_INTS;
+ //IRQ_ENABLE;
/* Should be read before UDR */
ser_uart1->status |= UCSR1A & (SERRF_RXSROVERRUN | SERRF_FRAMEERROR);
#endif
}
/* Re-enable receive complete int */
+ //IRQ_DISABLE;
//UCSR1B |= BV(RXCIE);
SER_STROBE_OFF;
#endif // AVR_HAS_UART1
-/*!
+/**
* SPI interrupt handler
*/
SIGNAL(SIG_SPI)
{
+ SER_STROBE_ON;
+
/* Read incoming byte. */
if (!fifo_isfull(&ser_spi->rxfifo))
fifo_push(&ser_spi->rxfifo, SPDR);
SPDR = fifo_pop(&ser_spi->txfifo);
else
UARTDescs[SER_SPI].sending = false;
+
+ SER_STROBE_OFF;
}
projects / bertos.git / blobdiff