+++ /dev/null
-/*!
- * \file
- * <!--
- * Copyright 2003, 2004, 2005 Develer S.r.l. (http://www.develer.com/)
- * Copyright 2000 Bernardo Innocenti <bernie@develer.com>
- * This file is part of DevLib - See README.devlib for information.
- * -->
- *
- * \version $Id$
- *
- * \author Bernardo Innocenti <bernie@develer.com>
- * \author Francesco Sacchi <batt@develer.com>
- *
- * \brief Low-level timer module for AVR (interface).
- */
-
-/*#*
- *#* $Log$
- *#* Revision 1.25 2005/07/19 07:26:37 bernie
- *#* Refactor to decouple timer ticks from milliseconds.
- *#*
- *#* Revision 1.24 2005/04/11 19:10:28 bernie
- *#* Include top-level headers from cfg/ subdir.
- *#*
- *#* Revision 1.23 2005/03/01 23:24:51 bernie
- *#* Tweaks for avr-libc 1.2.x.
- *#*
- *#* Revision 1.21 2004/12/13 12:07:06 bernie
- *#* DISABLE_IRQSAVE/ENABLE_IRQRESTORE: Convert to IRQ_SAVE_DISABLE/IRQ_RESTORE.
- *#*
- *#* Revision 1.20 2004/11/16 20:59:46 bernie
- *#* Include <avr/io.h> explicitly.
- *#*
- *#* Revision 1.19 2004/10/19 08:56:41 bernie
- *#* TIMER_STROBE_ON, TIMER_STROBE_OFF, TIMER_STROBE_INIT: Move from timer_avr.h to timer.h, where they really belong.
- *#*
- *#* Revision 1.18 2004/09/20 03:31:03 bernie
- *#* Fix racy racy code.
- *#*/
-#ifndef DRV_TIMER_AVR_H
-#define DRV_TIMER_AVR_H
-
-#include <appconfig.h> /* CONFIG_TIMER */
-#include <hw.h>
-
-/*!
- * Values for CONFIG_TIMER.
- *
- * Select which hardware timer interrupt to use for system clock and softtimers.
- * \note The timer 1 overflow mode set the timer as a 24 kHz PWM.
- */
-#define TIMER_ON_OUTPUT_COMPARE0 1
-#define TIMER_ON_OVERFLOW1 2
-#define TIMER_ON_OUTPUT_COMPARE2 3
-#define TIMER_ON_OVERFLOW3 4
-
-/*! HW dependent timer initialization */
-#if (CONFIG_TIMER == TIMER_ON_OUTPUT_COMPARE0)
-
- #define TIMER_PRESCALER 64
- #define TIMER_HW_BITS 8
- #define DEFINE_TIMER_ISR SIGNAL(SIG_OUTPUT_COMPARE0)
- #define TIMER_TICKS_PER_MSEC 1
- #define TIMER_HW_CNT OCR_DIVISOR
-
- //! Type of time expressed in ticks of the hardware high-precision timer
- typedef uint8_t hptime_t;
-
-#elif (CONFIG_TIMER == TIMER_ON_OVERFLOW1)
-
- #define TIMER_PRESCALER 1
- #define TIMER_HW_BITS 8
- /*! This value is the maximum in overflow based timers. */
- #define TIMER_HW_CNT (1 << TIMER_HW_BITS)
- #define DEFINE_TIMER_ISR SIGNAL(SIG_OVERFLOW1)
- #define TIMER_TICKS_PER_MSEC (((TIMER_HW_HPTICKS_PER_SEC + TIMER_HW_CNT / 2) / TIMER_HW_CNT + 500) / 1000)
-
- //! Type of time expressed in ticks of the hardware high precision timer
- typedef uint16_t hptime_t;
-
-#elif (CONFIG_TIMER == TIMER_ON_OUTPUT_COMPARE2)
-
- #define TIMER_PRESCALER 64
- #define TIMER_HW_BITS 8
- #define DEFINE_TIMER_ISR SIGNAL(SIG_OUTPUT_COMPARE2)
- #define TIMER_TICKS_PER_MSEC 1
- /*! Value for OCR register in output-compare based timers. */
- #define TIMER_HW_CNT OCR_DIVISOR
-
-
- //! Type of time expressed in ticks of the hardware high precision timer
- typedef uint8_t hptime_t;
-
-#elif (CONFIG_TIMER == TIMER_ON_OVERFLOW3)
-
- #define TIMER_PRESCALER 1
- #define TIMER_HW_BITS 8
- /*! This value is the maximum in overflow based timers. */
- #define TIMER_HW_CNT (1 << TIMER_HW_BITS)
- #define DEFINE_TIMER_ISR SIGNAL(SIG_OVERFLOW3)
- #define TIMER_TICKS_PER_MSEC (((TIMER_HW_HPTICKS_PER_SEC + TIMER_HW_CNT / 2) / TIMER_HW_CNT + 500) / 1000)
-
- //! Type of time expressed in ticks of the hardware high precision timer
- typedef uint16_t hptime_t;
-#else
-
- #error Unimplemented value for CONFIG_TIMER
-#endif /* CONFIG_TIMER */
-
-
-/*! Frequency of the hardware high precision timer */
-#define TIMER_HW_HPTICKS_PER_SEC ((CLOCK_FREQ + TIMER_PRESCALER / 2) / TIMER_PRESCALER)
-
-/*!
- * System timer: additional division after the prescaler
- * 12288000 / 64 / 192 (0..191) = 1 ms
- */
-#define OCR_DIVISOR (((CLOCK_FREQ + TIMER_PRESCALER / 2) / TIMER_PRESCALER + TICKS_PER_SEC / 2) / TICKS_PER_SEC - 1) /* 191 */
-
-/*! Not needed, IRQ timer flag cleared automatically */
-#define timer_hw_irq() do {} while (0)
-
-
-#endif /* DRV_TIMER_AVR_H */
projects / bertos.git / blobdiff