+#error This code must be revised for the new timer API
/*!
* \file
* <!--
- * Copyright 2004 Giovanni Bajo
* Copyright 2004 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
+ * Copyright 2004 Giovanni Bajo
+ * This file is part of DevLib - See README.devlib for information.
* -->
*
* \version $Id$
* \brief Driver module for DSP56K
*/
-/*
- * $Log$
- * Revision 1.1 2004/05/23 18:23:30 bernie
- * Import drv/timer module.
- *
- */
+/*#*
+ *#* $Log$
+ *#* Revision 1.9 2006/02/21 21:28:02 bernie
+ *#* New time handling based on TIMER_TICKS_PER_SEC to support slow timers with ticks longer than 1ms.
+ *#*
+ *#* Revision 1.8 2005/11/04 16:20:02 bernie
+ *#* Fix reference to README.devlib in header.
+ *#*
+ *#* Revision 1.7 2005/04/11 19:10:28 bernie
+ *#* Include top-level headers from cfg/ subdir.
+ *#*
+ *#* Revision 1.6 2004/11/16 22:37:14 bernie
+ *#* Replace IPTR with iptr_t.
+ *#*
+ *#* Revision 1.5 2004/08/25 14:12:08 rasky
+ *#* Aggiornato il comment block dei log RCS
+ *#*
+ *#* Revision 1.4 2004/07/30 14:27:49 rasky
+ *#* Aggiornati alcuni file DSP56k per la nuova libreria di IRQ management
+ *#*
+ *#* Revision 1.3 2004/06/06 18:30:34 bernie
+ *#* Import DSP56800 changes from SC.
+ *#*
+ *#* Revision 1.2 2004/06/03 11:27:09 bernie
+ *#* Add dual-license information.
+ *#*
+ *#* Revision 1.1 2004/05/23 18:23:30 bernie
+ *#* Import drv/timer module.
+ *#*
+ *#*/
#ifndef DRV_TIMER_DSP56K_H
#define DRV_TIMER_DSP56K_H
+#include "timer.h"
#include <DSP56F807.h>
-#include <compiler.h>
+#include <cfg/compiler.h>
+#include <hw.h>
+#include <drv/irq.h>
-//! The system timer for events is currently TMRA0. We prefer A/B over C/D because
-// A/B share the pin with the quadrature decoder module, and we do not need
-// pins for our system timer.
-// If you want to change this setting, you need also to modify the IRQ vector table.
-#define REG_SYSTEM_TIMER (REG_TIMER_A + 0)
-#define SYSTEM_TIMER_IRQ_VECTOR 42 /* TMRA0 */
+// Calculate register pointer and irq vector from hw.h setting
+#define REG_SYSTEM_TIMER PP_CAT(REG_TIMER_, SYSTEM_TIMER)
+#define SYSTEM_TIMER_IRQ_VECTOR PP_CAT(IRQ_TIMER_, SYSTEM_TIMER)
+//! Prescaler for the system timer
#define TIMER_PRESCALER 16
//! Frequency of the hardware high precision timer
//! Type of time expressed in ticks of the hardware high precision timer
typedef uint16_t hptime_t;
+static void system_timer_isr(UNUSED(iptr_t, arg));
+
static void timer_hw_init(void)
{
uint16_t compare;
// The value for reload (at initializationa and after compare is met) is zero
REG_SYSTEM_TIMER->LOAD = 0;
- // Set the interrupt priority
+ // Set the interrupt handler and priority
+ irq_install(SYSTEM_TIMER_IRQ_VECTOR, &system_timer_isr, NULL);
irq_setpriority(SYSTEM_TIMER_IRQ_VECTOR, IRQ_PRIORITY_SYSTEM_TIMER);
// Small preprocessor trick to generate the REG_TIMER_CTRL_PRIMARY_IPBYNN macro
// needed to set the prescaler
- #define PP_CAT2(x,y) x ## y
- #define PP_CAT(x,y) PP_CAT2(x,y)
#define REG_CONTROL_PRESCALER PP_CAT(REG_TIMER_CTRL_PRIMARY_IPBY, TIMER_PRESCALER)
// Setup the counter and start counting
return REG_SYSTEM_TIMER->CNTR;
}
-void system_timer_isr(void);
-
#define DEFINE_TIMER_ISR \
- void system_timer_isr(void)
+ static void system_timer_isr(UNUSED(iptr_t, arg))
#endif /* DRV_TIMER_DSP56_H */