Move this example into board presets.

[bertos.git] / examples / avr-kern / hw / hw_dataflash.c

diff --git a/examples/avr-kern/hw/hw_dataflash.c b/examples/avr-kern/hw/hw_dataflash.c
deleted file mode 100644 (file)
index 844dd92..0000000
--- a/examples/avr-kern/hw/hw_dataflash.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief Dataflash HW control routines.
- *
- * \version $Id$
- * \author Francesco Sacchi <batt@develer.com>
- */
-
-#include "hw/hw_dataflash.h"
-
-#include <cfg/compiler.h>
-#include <cfg/module.h>
-#include <cfg/macros.h>
-
-#warning TODO:This is an example implementation, you must implement it!
-
-MOD_DEFINE(hw_dataflash);
-
-/**
- * Data flash init function.
- *
- * This function provide to initialize all that
- * needs to drive a dataflash memory.
- * Generaly needs to init pins to drive a CS line
- * and reset line.
- */
-void dataflash_hw_init(void)
-{
-
-    //Disable CS line (remove if not needed)
-       dataflash_hw_setCS(false);
-
-       /*
-        * Put here your code!
-        *
-        * Note:
-        * - if you drive manualy CS line, here init a CS pin
-        * - if you use a dedicated reset line, here init a reset pin
-        */
-
-       MOD_INIT(hw_dataflash);
-}
-
-/**
- * Chip Select drive.
- *
- * This function enable or disable a CS line.
- * You must implement this function comply to a dataflash
- * memory datasheet to allow the drive to enable a memory
- * when \p enable flag is true, and disable it when is false.
- */
-void dataflash_hw_setCS(bool enable)
-{
-       if (enable)
-       {
-               /*
-                * Put here your code to enable
-                * dataflash memory
-                */
-       }
-       else
-       {
-               /*
-                * Put here your code to disable
-                * dataflash memory
-                */
-       }
-}
-
-/**
- * Reset data flash memory.
- *
- * This function provide to send reset signal to
- * dataflash memory. You must impement it comly to a dataflash
- * memory datasheet to allow the drive to set a reset pin
- * when \p enable flag is true, and disable it when is false.
- *
- */
-void dataflash_hw_setReset(bool enable)
-{
-       if (enable)
-       {
-               /*
-                * Put here your code to set reset of
-                * dataflash memory
-                */
-       }
-       else
-       {
-               /*
-                * Put here your code to clear reset of
-                * dataflash memory
-                */
-       }
-}
-