Move this example into board presets.
[bertos.git] / examples / avr-kern / hw / hw_spi.h
diff --git a/examples/avr-kern/hw/hw_spi.h b/examples/avr-kern/hw/hw_spi.h
deleted file mode 100644 (file)
index 04e4893..0000000
+++ /dev/null
@@ -1,115 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief Hardware macro definition.
- *
- *
- * \version $Id$
- * \author Daniele Basile <asterix@develer.com>
- */
-
-#ifndef HW_SPI_H
-#define HW_SPI_H
-
-#warning TODO:This is an example implentation, you must implement it!
-
-#include <cfg/macros.h>
-
-/**
- * SPI pin definition.
- *
- * \note CS is assert when level
- * is low.
- *
- * \{
- */
-#define CS       /* pin */   ///Connect to CS pin of Flash memory.
-#define SCK      /* pin */   ///Connect to SCK pin of Flash memory.
-#define MOSI     /* pin */   ///Connect to SI pin of Flash memory.
-#define MISO     /* pin */   ///Connect to SO pin of Flash memory.
-#define SPI_PORT /* pin */   ///Micro pin PORT register.
-#define SPI_PIN  /* pin */   ///Micro pin PIN register.
-#define SPI_DDR  /* pin */   ///Micro pin DDR register.
-/*\}*/
-
-/**
- * Pin logic level.
- *
- * \{
- */
-#define MOSI_LOW()       do { /* Implement me! */ } while(0)
-#define MOSI_HIGH()      do { /* Implement me! */ } while(0)
-#define MISO_HIGH()      do { /* Implement me! */ } while(0)
-#define SCK_LOW()        do { /* Implement me! */ } while(0)
-#define SCK_HIGH()       do { /* Implement me! */ } while(0)
-#define CS_LOW()         do { /* Implement me! */ } while(0)
-#define CS_HIGH()        do { /* Implement me! */ } while(0)
-/*\}*/
-
-/**
- * SPI pin commands.
- *
- * \{
- */
-#define CS_ENABLE()      CS_LOW()
-#define CS_DISABLE()     CS_HIGH()
-#define SS_ACTIVE()      CS_LOW()
-#define SS_INACTIVE()    CS_HIGH()
-#define SCK_INACTIVE()   SCK_LOW()
-#define SCK_ACTIVE()     SCK_HIGH()
-#define CS_OUT()         do { /* Implement me! */ } while(0)
-#define MOSI_IN()        do { /* Implement me! */ } while(0)
-#define MOSI_OUT()       do { /* Implement me! */ } while(0)
-#define IS_MISO_HIGH()  (false /* Implement me! */ )
-#define MISO_IN()        do { /* Implement me! */ } while(0)
-#define MISO_OUT()       do { /* Implement me! */ } while(0)
-#define SCK_OUT()        do { /* Implement me! */ } while(0)
-
-#define SCK_PULSE()\
-       do {\
-                       SCK_HIGH();\
-                       SCK_LOW();\
-       } while (0)
-/*\}*/
-
-
-#define SPI_HW_INIT() \
-       CS_DISABLE();\
-       MOSI_LOW();\
-       SCK_LOW();\
-       MISO_IN();\
-       MOSI_OUT();\
-       SCK_OUT();\
-       CS_OUT();
-
-#endif /* HW_SPI_H */
-