The benchmark are replaced with bertos module (see wizard preset).

[bertos.git] / examples / benchmark / kernel-core_avr / hw / hw_lcd.h

diff --git a/examples/benchmark/kernel-core_avr/hw/hw_lcd.h b/examples/benchmark/kernel-core_avr/hw/hw_lcd.h
deleted file mode 100644 (file)
index 3a206a0..0000000
--- a/examples/benchmark/kernel-core_avr/hw/hw_lcd.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2003, 2004, 2005, 2008 Develer S.r.l. (http://www.develer.com/)
- * Copyright 2001 Bernie Innocenti <bernie@codewiz.org>
- *
- * -->
- *
- * \brief LCD low-level hardware macros
- *
- * \version $Id$
- *
- * \author Bernie Innocenti <bernie@codewiz.org>
- * \author Stefano Fedrigo <aleph@develer.com>
- *
- */
-
-#ifndef HW_LCD_H
-#define HW_LCD_H
-
-#include "cfg/cfg_lcd.h"  /* CONFIG_LCD_4BIT */
-#include <cfg/macros.h>   /* BV() */
-#include <cfg/debug.h>
-
-#include <cpu/attr.h>
-#include <cpu/irq.h>
-#include <cpu/types.h>
-
-#warning TODO:This is an example implementation, you must implement it!
-
-/**
- * \name LCD I/O pins/ports
- * @{
- */
-#define LCD_RS    /* Implement me! */
-#define LCD_RW    /* Implement me! */
-#define LCD_E     /* Implement me! */
-#define LCD_DB0   /* Implement me! */
-#define LCD_DB1   /* Implement me! */
-#define LCD_DB2   /* Implement me! */
-#define LCD_DB3   /* Implement me! */
-#define LCD_DB4   /* Implement me! */
-#define LCD_DB5   /* Implement me! */
-#define LCD_DB6   /* Implement me! */
-#define LCD_DB7   /* Implement me! */
-/*@}*/
-
-/**
- * \name DB high nibble (DB[4-7])
- * @{
- */
-
-#if CONFIG_LCD_4BIT
-       #define LCD_MASK    (LCD_DB7 | LCD_DB6 | LCD_DB5 | LCD_DB4)
-       #define LCD_SHIFT   4
-#else
-       #define LCD_MASK (uint8_t)0xff
-       #define LCD_SHIFT 0
-#endif
-/*@}*/
-
-/**
- * \name LCD bus control macros
- * @{
- */
-#define LCD_CLR_RS      /* Implement me! */
-#define LCD_SET_RS      /* Implement me! */
-#define LCD_CLR_RD      /* Implement me! */
-#define LCD_SET_RD      /* Implement me! */
-#define LCD_CLR_E       /* Implement me! */
-#define LCD_SET_E       /* Implement me! */
-
-#if CONFIG_LCD_4BIT
-       #define LCD_WRITE_H(x)  ((void)x)/* Implement me! */
-       #define LCD_WRITE_L(x)  ((void)x)/* Implement me! */
-       #define LCD_READ_H      ( 0 /* Implement me! */ )
-       #define LCD_READ_L      ( 0 /* Implement me! */ )
-#else
-       #define LCD_WRITE(x)    ((void)x)/* Implement me! */
-       #define LCD_READ        (0 /* Implement me! */ )
-#endif
-/*@}*/
-
-/** Set data bus direction to output (write to display) */
-#define LCD_DB_OUT          /* Implement me! */
-
-/** Set data bus direction to input (read from display) */
-#define LCD_DB_IN           /* Implement me! */
-
-/** Delay for write (Enable pulse width, 220ns) */
-#define LCD_DELAY_WRITE \
-       do { \
-               NOP; \
-               NOP; \
-               NOP; \
-               NOP; \
-               NOP; \
-       } while (0)
-
-/** Delay for read (Data ouput delay time, 120ns) */
-#define LCD_DELAY_READ \
-       do { \
-               NOP; \
-               NOP; \
-               NOP; \
-               NOP; \
-       } while (0)
-
-
-INLINE void lcd_bus_init(void)
-{
-       cpu_flags_t flags;
-       IRQ_SAVE_DISABLE(flags);
-
-       /*
-        * Here set bus pin!
-        * to init a lcd device.
-        *
-        */
-
-       /*
-        * Data bus is in output state most of the time:
-        * LCD r/w functions assume it is left in output state
-        */
-       LCD_DB_OUT;
-
-
-       IRQ_RESTORE(flags);
-}
-
-#endif /* HW_LCD_H */