+++ /dev/null
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction. Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License. This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief thermo hardware-specific control functions.
- *
- * \version $Id$
- * \author Francesco Sacchi <batt@develer.com>
- *
- */
-
-#ifndef HW_THERMO_H
-#define HW_THERMO_H
-
-#include "thermo_map.h"
-#include "ntc_map.h"
-
-#include <drv/phase.h>
-#include <drv/ntc.h>
-
-#include <cfg/debug.h>
-#include <cfg/compiler.h>
-
-#warning TODO:This is an example implentation, you must implement it!
-
-/*!
- * This function should return the temperature set tolerance.
- */
-INLINE deg_t thermo_hw_tolerance(ThermoDev dev)
-{
- ASSERT(dev < THERMO_CNT);
-
- switch (dev)
- {
- case THERMO_TEST:
- /* Put here convertion function to temperature size */
- break;
-
- /* Put here your thermo device */
-
- default:
- ASSERT(0);
- }
-
- return 0;
-}
-
-
-/*!
- * This function should return the timeout for reaching the
- * target temperature.
- */
-INLINE ticks_t thermo_hw_timeout(ThermoDev dev)
-{
- ASSERT(dev < THERMO_CNT);
-
- switch (dev)
- {
- case THERMO_TEST:
- /* return ms_to_ticks(60000); */
- break;
-
- /* Put here a time out for select thermo device */
-
- default:
- ASSERT(0);
- }
-
- return 0;
-}
-
-
-
-/*!
- * Read the temperature of the hw device \a dev.
- */
-INLINE deg_t thermo_hw_read(ThermoDev dev)
-{
- return ntc_read(dev);
-}
-
-
-/*!
- * Turns off a specific device.
- * This function is usefull to handle errors.
- */
-INLINE void thermo_hw_off(ThermoDev dev)
-{
- ASSERT(dev < THERMO_CNT);
-
- switch (dev)
- {
- case THERMO_TEST:
- phase_setPower(TRIAC_TEST, 0);
- break;
-
- /* Put here a thermo device to turn off */
-
- default:
- ASSERT(0);
- }
-
-}
-
-
-/*!
- * Based on the current temperature \a cur_temp and the target temperature \a target, this function turns on and off specific
- * triac channel and handles the freezer alarm.
- * It may use also PID control for thermo-regolations.
- */
-INLINE void thermo_hw_set(ThermoDev dev, deg_t target, deg_t cur_temp)
-{
- ASSERT(dev < THERMO_CNT);
-
- deg_t dist = target - cur_temp;
- //kprintf("dev[%d], dist[%d]\n", dev, dist);
-
- switch(dev)
- {
- case THERMO_TEST:
- if (dist > 0)
- {
- /* phase_setPower(TRIAC_TEST, dist * PID_TEST_K); */
- }
- else
- {
- /* phase_setPower(TRIAC_TEST, 0); */
- }
- break;
-
- /* Put here an other thermo device */
-
- default:
- ASSERT(0);
- }
-}
-
-
-#define THERMO_HW_INIT _thermo_hw_init()
-
-/*!
- * Init hw associated with thermo-control.
- */
-INLINE void _thermo_hw_init(void)
-{
- ASSERT(phase_initialized);
- ASSERT(ntc_initialized);
-
- phase_setPower(TRIAC_TEST, 0);
-
- /* Add here the other thermo device */
-}
-
-#endif /* HW_THERMO_H */
projects / bertos.git / blobdiff