Remove old tests.

[bertos.git] / examples / lm3s1968 / cfg / cfg_lcd.h

diff --git a/examples/lm3s1968/cfg/cfg_lcd.h b/examples/lm3s1968/cfg/cfg_lcd.h
deleted file mode 100644 (file)
index d48fa5d..0000000
--- a/examples/lm3s1968/cfg/cfg_lcd.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief Configuration file for lcd display module.
- */
-
-#ifndef CFG_LCD_H
-#define CFG_LCD_H
-
-/**
- * Use 4 bit addressing mode.
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_LCD_4BIT            0
-
-/**
- * Use a table to speed up LCD memory addressing.
- * This will use about 100 bytes of RAM.
- * $WIZ$ type = "boolean"
- */
-#define CONFIG_LCD_ADDRESS_FAST    0
-
-/**
- * LCD setting for 32122A (AVR implementation).
- * $WIZ$ type = "boolean"
- * $WIZ$ supports = "avr and False"
- */
-#define CONFIG_LCD_SOFTINT_REFRESH 0
-
-/**
- * LCD setting for 32122A (AVR implementation).
- * $WIZ$ type = "boolean"
- * $WIZ$ supports = "avr and False"
- */
-#define CONFIG_LCD_WAIT            0
-
-
-#endif /* CFG_LCD_H */
-