LPC2: add LPC2378 example project.

[bertos.git] / examples / lpc2378 / hw / hw_i2c_bitbang.h

diff --git a/examples/lpc2378/hw/hw_i2c_bitbang.h b/examples/lpc2378/hw/hw_i2c_bitbang.h
new file mode 100644 (file)
index 0000000..743e28b
--- /dev/null
+++ b/examples/lpc2378/hw/hw_i2c_bitbang.h
@@ -0,0 +1,66 @@
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2003, 2004, 2006, 2008 Develer S.r.l. (http://www.develer.com/)
+ * Copyright 2000 Bernie Innocenti <bernie@codewiz.org>
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Macro for I2C bitbang operation.
+ *
+ *
+ * \version $Id: hw_i2c_bitbang.h 2506 2009-04-15 08:29:07Z duplo $
+ *
+ * \author Francesco Sacchi <batt@develer.com>
+ */
+
+#ifndef HW_I2C_BITBANG_H
+#define HW_I2C_BITBANG_H
+
+#warning TODO:This is an example implementation, you must implement it!
+
+#define SDA_HI  do { /* Implement me:Set SDA High by setting SDA pin as input */ } while (0)
+#define SDA_LO  do { /* Implement me:Set SDA Low by setting SDA pin as open collector output */ } while (0)
+#define SCL_HI  do { /* Implement me:Set SCL High by setting SCL pin as input */ } while (0)
+#define SCL_LO  do { /* Implement me:Set SCL Low by setting SCL pin as open collector output */ } while (0)
+
+
+#define SCL_IN       (true) /* Implement me: read SDA pin state */
+#define SDA_IN       (true) /* Implement me: read SCL pin state */
+
+/**
+ * This macro should set SDA and SCL lines as input.
+ */
+#define I2C_BITBANG_HW_INIT do { /* Implement me! */ } while (0)
+
+/**
+ * Half bit delay routine used to generate the correct timings.
+ */
+#define I2C_HALFBIT_DELAY() do { /* Implement me! */ } while (0)
+
+#endif /* HW_I2C_BITBANG_H */