Remove old tests.

[bertos.git] / examples / lpc2378 / hw / hw_sipo.h

diff --git a/examples/lpc2378/hw/hw_sipo.h b/examples/lpc2378/hw/hw_sipo.h
deleted file mode 100644 (file)
index b4fba47..0000000
--- a/examples/lpc2378/hw/hw_sipo.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2003, 2004, 2006, 2008, 2009 Develer S.r.l. (http://www.develer.com/)
- * Copyright 2000 Bernie Innocenti <bernie@codewiz.org>
- * All Rights Reserved.
- * -->
- *
- * \brief Macro for HW_SIPO_H
- *
- *
- * \version $Id: hw_sipo.h 2882 2009-09-04 19:17:37Z batt $
- *
- * \author Andrea Grandi <andrea@develer.com>
- * \author Daniele Basile <asterix@develer.com>
- */
-
-#ifndef HW_SIPO_H
-#define HW_SIPO_H
-
-/**
- * Map sipo connection on board.
- */
-typedef enum SipoMap
-{
-       SIPO_CNT
-} SipoMap;
-
-/**
- * Define generic macro to set pins logic level
- */
-#define SIPO_SET_LEVEL_LOW(dev)    do { /* Implement me! */   } while (0)
-#define SIPO_SET_LEVEL_HIGH(dev)   do { /* Implement me! */   } while (0)
-
-
-/**
- * Generate one low pulse on select line.
- */
-#define PULSE_LOW(dev)    do { /* Implement me! */   } while (0)
-
-/**
- * Generate one hight pulse on select line.
- */
-#define PULSE_HIGH(dev)     do { /* Implement me! */   } while (0)
-
-
-/**
- * Define the procedure to drive serial input in sipo device (SI).
- */
-#define SIPO_SI_HIGH()   do { /* Implement me! */   } while (0)
-#define SIPO_SI_LOW()    do { /* Implement me! */   } while (0)
-
-/**
- * Drive clock to shift SI data into latch.
- */
-#define SIPO_SI_CLOCK(clk_pol) \
-       do { \
-               (void)clk_pol; \
-               /* Implement me! */ \
-       } while (0)
-
-/**
- * Do everything needed in order to load dato into sipo.
- */
-#define SIPO_LOAD(device, load_pol)   do { /* Implement me! */   } while (0)
-
-/**
- * Enable the shift register output.
- */
-#define SIPO_ENABLE()             do { /* Implement me! */   } while (0)
-
-/**
- * Set polarity for Load, Clk, SI signals.
- */
-#define SIPO_SET_LD_LEVEL(device, load_pol)  do { /* Implement me! */   } while (0)
-#define SIPO_SET_CLK_LEVEL(clock_pol)        do { /* Implement me! */   } while (0)
-#define SIPO_SET_SI_LEVEL()       do { /* Implement me! */   } while (0)
-
-/**
- * Do anything that needed to init sipo pins.
- */
-#define SIPO_INIT_PIN()           do { /* Implement me! */   } while (0)
-
-#endif /* HW_SIPO_H */