Remove old tests.

[bertos.git] / examples / stm32p103 / stm32p103.mk

diff --git a/examples/stm32p103/stm32p103.mk b/examples/stm32p103/stm32p103.mk
deleted file mode 100644 (file)
index 555b9af..0000000
--- a/examples/stm32p103/stm32p103.mk
+++ /dev/null
@@ -1,63 +0,0 @@
-# Copyright 2010 Develer S.r.l. (http://www.develer.com/)
-#
-# Makefile for the stm32p103 board example.
-#
-# Author: Andrea Righi <arighi@develer.com>
-
-# Set to 1 for debug builds
-stm32p103_DEBUG = 1
-
-include bertos/fonts/fonts.mk
-
-# Our target application
-TRG += stm32p103
-
-stm32p103_CSRC = \
-       bertos/mware/formatwr.c \
-       bertos/mware/hex.c \
-       bertos/mware/sprintf.c \
-       bertos/mware/event.c \
-       bertos/struct/heap.c \
-       bertos/kern/signal.c \
-       bertos/kern/monitor.c \
-       bertos/kern/proc.c \
-       bertos/drv/timer.c \
-       bertos/cpu/cortex-m3/drv/kdebug_stm32.c \
-       bertos/cpu/cortex-m3/drv/gpio_stm32.c \
-       bertos/cpu/cortex-m3/drv/clock_stm32.c \
-       bertos/cpu/cortex-m3/drv/timer_cm3.c \
-       bertos/cpu/cortex-m3/drv/irq_cm3.c \
-       bertos/cpu/cortex-m3/hw/switch_ctx_cm3.c \
-       bertos/cpu/cortex-m3/hw/init_cm3.c \
-       examples/stm32p103/main.c
-
-stm32p103_CPPASRC = \
-       bertos/cpu/cortex-m3/hw/vectors_cm3.S \
-       bertos/cpu/cortex-m3/hw/crt_cm3.S \
-       #
-
-# This is an hosted application
-stm32p103_PREFIX = arm-none-eabi-
-
-stm32p103_CPPAFLAGS = -mthumb
-stm32p103_CPPFLAGS = -D'ARCH=0' -D__ARM_STM32P103__ -D'CPU_FREQ=(72000000L)' -D'WIZ_AUTOGEN' -mthumb -Iexamples/stm32p103 -Ibertos/cpu/cortex-m3 -fno-strict-aliasing -fwrapv
-stm32p103_LDFLAGS = -nostartfiles -T bertos/cpu/cortex-m3/scripts/stm32p103_rom.ld -Wl,--no-warn-mismatch -mthumb
-
-stm32p103_CPU = cortex-m3
-
-stm32p103_PROGRAMMER_CPU = stm32
-stm32p103_PROGRAMMER_TYPE = jtag-tiny
-stm32p103_FLASH_SCRIPT = bertos/prg_scripts/arm/flash-stm32.sh
-stm32p103_STOPFLASH_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
-stm32p103_DEBUG_SCRIPT = bertos/prg_scripts/arm/debug.sh
-stm32p103_STOPDEBUG_SCRIPT = bertos/prg_scripts/arm/stopopenocd.sh
-
-ifeq ($(stm32p103_DEBUG),0)
-       # Production options
-       stm32p103_CFLAGS += -O0
-       stm32p103_CXXFLAGS += -O0
-else
-       # Debug options
-       stm32p103_CPPAFLAGS += -g -gdwarf-2
-       stm32p103_CPPFLAGS += -O0 -g3 -gdwarf-2 -fverbose-asm
-endif