+++ /dev/null
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction. Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License. This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief Configuration file for serial module.
- *
- * \version $Id$
- *
- * \author Daniele Basile <asterix@develer.com>
- */
-
-#ifndef CFG_SER_H
-#define CFG_SER_H
-
-
-/// Kdebug console on debug unit
-#define CONFIG_BOOT_PORT 1
-
-/// Baud-rate for the kdebug console
-#define CONFIG_BOOT_BAUDRATE 115200
-
-/// [bytes] Size of the outbound FIFO buffer for port 0.
-#define CONFIG_UART0_TXBUFSIZE 32
-
-/// [bytes] Size of the inbound FIFO buffer for port 0.
-#define CONFIG_UART0_RXBUFSIZE 64
-
-/// [bytes] Size of the outbound FIFO buffer for port 1.
-#define CONFIG_UART1_TXBUFSIZE 32
-
-/// [bytes] Size of the inbound FIFO buffer for port 1.
-#define CONFIG_UART1_RXBUFSIZE 64
-
-
-/// [bytes] Size of the outbound FIFO buffer for SPI port (AVR only)
-#define CONFIG_SPI_TXBUFSIZE 32
-
-/// [bytes] Size of the inbound FIFO buffer for SPI port (AVR only)
-#define CONFIG_SPI_RXBUFSIZE 32
-
-/// [bytes] Size of the outbound FIFO buffer for SPI port 0.
-#define CONFIG_SPI0_TXBUFSIZE 32
-
-/// [bytes] Size of the inbound FIFO buffer for SPI port 0.
-#define CONFIG_SPI0_RXBUFSIZE 32
-
-/// [bytes] Size of the outbound FIFO buffer for SPI port 1.
-#define CONFIG_SPI1_TXBUFSIZE 32
-
-/// [bytes] Size of the inbound FIFO buffer for SPI port 1.
-#define CONFIG_SPI1_RXBUFSIZE 32
-
-/// SPI data order (AVR only).
-#define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST
-
-/// SPI clock division factor (AVR only).
-#define CONFIG_SPI_CLOCK_DIV 16
-
-/// SPI clock polarity: 0 = normal low, 1 = normal high (AVR only).
-#define CONFIG_SPI_CLOCK_POL 0
-
-/// SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only).
-#define CONFIG_SPI_CLOCK_PHASE 0
-
-/// Default transmit timeout (ms). Set to -1 to disable timeout support.
-#define CONFIG_SER_TXTIMEOUT 100
-
-/// Default receive timeout (ms). Set to -1 to disable timeout support.
-#define CONFIG_SER_RXTIMEOUT 100
-
-/// Use RTS/CTS handshake
-#define CONFIG_SER_HWHANDSHAKE 0
-
-/// Default baud rate (set to 0 to disable).
-#define CONFIG_SER_DEFBAUDRATE 0
-
-/// For serial debug.
-#define CONFIG_SER_STROBE 0
-
-#endif /* CFG_SER_H */