Remove old tests.

[bertos.git] / examples / triface / boot / main.c

diff --git a/examples/triface/boot/main.c b/examples/triface/boot/main.c
deleted file mode 100644 (file)
index d84dc25..0000000
--- a/examples/triface/boot/main.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
- * Copyright 2000 Bernie Innocenti <bernie@codewiz.org>
- *
- * -->
- *
- * \brief Flash boot loader main.
- * This is a simple generic bootloader app.
- * It requires only a serial port to work.
- * Try to receive a file through XMODEM protocol
- * and flash it on program memory.
- * BOOT_INIT, BOOT_END are macros used to perform special operations
- * respectively at boot start and boot end and are CPU dependant.
- * The macro START_APP() jumps to main application start.
- *
- * \version $Id$
- * \author Stefano Fedrigo <aleph@develer.com>
- * \author Francesco Sacchi <batt@develer.com>
- * \author Daniele Basile <asterix@develer.com>
- */
-
-#include "hw/hw_boot.h"
-#include "cfg/cfg_ser.h"
-
-#include <net/xmodem.h>
-
-#include <cfg/compiler.h>
-#include <cfg/debug.h>
-#include <cfg/macros.h> /* BV() */
-
-#include <drv/ser.h>
-#include <drv/timer.h>
-#include <drv/flash.h>
-
-#include <string.h>
-
-#include <avr/wdt.h>
-
-/*
- * Watchdog disable.
- *
- * This function disable the watchdog timer early after a reset.
- * We must do it very soon because new AVR cores do not disable
- * the watchdog timer after a cpu reset. In this way the watchdog
- * timer is still enabled, continuously resetting the cpu. This is
- * necessary only with new AVR cores, for other cores this code has
- * no effect.
- *
- * \{
- */
-// Function prototype of watchdog reset.
-void wdt_init(void) __attribute__((naked)) __attribute__((section(".init3")));
-// Function implementation of watchdog reset.
-void wdt_init(void)
-{
-    MCUSR = 0;
-    wdt_disable();
-
-    return;
-}
-/* \} */
-
-int main(void)
-{
-       Flash flash;
-       Serial ser;
-
-
-       // Set up flash programming functions.
-       flash_init(&flash);
-
-       IRQ_ENABLE;
-
-       BOOT_INIT;
-
-       kdbg_init();
-       timer_init();
-
-       /* Open the main communication port */
-
-       ser_init(&ser, CONFIG_BOOT_PORT);
-       ser_setbaudrate(&ser, CONFIG_BOOT_BAUDRATE);
-
-       xmodem_recv(&ser.fd, &flash.fd);
-
-       kfile_close(&flash.fd);
-       kfile_close(&ser.fd);
-
-       IRQ_DISABLE;
-
-       BOOT_END;
-
-       START_APP();
-
-}
-