-#error This module has not been revised for the API changes in several DevLib modules
/**
* \file
* <!--
- * Copyright 2004 Develer S.r.l. (http://www.develer.com/)
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction. Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License. This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2004, 2005, 2006, 2007 Develer S.r.l. (http://www.develer.com/)
* Copyright 1999, 2001 Bernardo Innocenti <bernie@develer.com>
- * This file is part of DevLib - See README.devlib for information.
+ *
* -->
* \brief X-Modem serial transmission protocol (implementation)
*
- * Suppots the CRC-16 and 1K-blocks variants of the standard.
+ * Supports the CRC-16 and 1K-blocks variants of the standard.
* \see ymodem.txt for the protocol description.
*
- * \todo Decouple this code from the LCD, buzzer and timer drivers
- * introducing user hooks or macros like CHECK_ABORT.
- *
* \todo Break xmodem_send() and xmodem_recv() in smaller functions.
*
- * \todo Add CONFIG_* vars to exclude either the receiver or the sender,
- * to reduce the footprint for applications that don't need both.
- *
* \todo Maybe convert drv/ser.c to the KFile interface for symmetry and
* flexibility.
*
* \version $Id$
* \author Bernardo Innocenti <bernie@develer.com>
+ * \author Francesco Sacchi <batt@develer.com>
*/
-/*#*
- *#* $Log$
- *#* Revision 1.10 2006/07/19 12:56:28 bernie
- *#* Convert to new Doxygen style.
- *#*
- *#* Revision 1.9 2005/11/04 16:20:02 bernie
- *#* Fix reference to README.devlib in header.
- *#*
- *#* Revision 1.8 2004/08/25 14:12:09 rasky
- *#* Aggiornato il comment block dei log RCS
- *#*
- *#* Revision 1.7 2004/08/15 06:30:06 bernie
- *#* Make the buffer a local variable, as documented.
- *#*
- *#* Revision 1.6 2004/08/15 05:31:46 bernie
- *#* Add an #error to spread some FUD about the quality of this module;
- *#* Add a few TODOs from Rasky's review;
- *#* Update to the new drv/ser.c API;
- *#* Move FlushSerial() to drv/ser.c and generalize.
- *#*
- *#* Revision 1.5 2004/08/12 23:46:21 bernie
- *#* Remove extra indentation level in switch statements.
- *#*
- *#* Revision 1.4 2004/08/12 23:35:50 bernie
- *#* Replace a handmade loop with memset().
- *#*
- *#* Revision 1.3 2004/08/12 23:34:36 bernie
- *#* Replace if/else with continue to reduce indentation level.
- *#*
- *#* Revision 1.2 2004/08/12 23:24:07 bernie
- *#* Rename UPDCRC() to UPDCRC16().
- *#*
- *#* Revision 1.1 2004/08/11 19:54:22 bernie
- *#* Import XModem protocol into DevLib.
- *#*
- *#*/
#include "xmodem.h"
+#include <appconfig.h>
+#include <string.h> /* for memset() */
#include <drv/ser.h>
-#include <drv/lcd.h>
-#include <drv/buzzer.h>
-#include <mware/crc.h>
-#include <mware/kfile.h>
+#include <algo/crc.h>
+#include <cfg/debug.h>
+
-#include <string.h> /* for memset() */
/**
#define XM_MAXRETRIES 15 /**< Max retries before giving up */
#define XM_MAXCRCRETRIES 7 /**< Max retries before switching to BCC */
-#define XM_BUFSIZE 1024 /**< Size of block buffer */
-
-#if (ARCH & ARCH_BOOT)
- #include "kbdhw.h"
- #if (ARCH & ARCH_SLIM)
- #define CHECK_ABORT KEYPRESSED_STOP
- #elif (ARCH & ARCH_SARF)
- #define CHECK_ABORT KEYPRESSED_ESC
- #endif
+#if CONFIG_XMODEM_1KCRC == 1
+ #define XM_BUFSIZE 1024 /**< 1024 bytes of block buffer */
#else
- #include "kbd.h"
- #if (ARCH & ARCH_SLIM)
- #define CHECK_ABORT (kbd_getchar() == K_STOP)
- #elif (ARCH & ARCH_SARF)
- #define CHECK_ABORT (kbd_getchar() == K_ESC)
- #endif
-#endif /* ARCH_BOOT */
-
-
-/**
- * Decode serial driver errors and print them on the display.
- */
-static void print_serial_error(struct Serial *port, int retries)
-{
- serstatus_t err, status;
-
- /* Get serial error code and reset it */
- status = ser_getstatus(port);
- ser_setstatus(port, 0);
-
- /* Mostra tutti gli errori in sequenza */
- for (err = 0; status != 0; status >>= 1, err++)
- {
- /* Se il bit dell'errore e' settato */
- if (status & 1)
- {
- lcd_printf(0, 3, LCD_FILL, "%s %d", serial_errors[err], retries);
- buz_beep(200);
- timer_delay(500);
- }
- }
-}
+ #define XM_BUFSIZE 128 /**< 128 bytes of block buffer */
+#endif
+#if CONFIG_XMODEM_RECV
/**
* \brief Receive a file using the XModem protocol.
*
* \param port Serial port to use for transfer
* \param fd Destination file
*
- * \note This function allocates a large amount of stack (>1KB).
+ * \note This function allocates a large amount of stack (\see XM_BUFSIZE).
*/
bool xmodem_recv(struct Serial *port, KFile *fd)
{
bool usecrc = true;
- lcd_printf(0, 2, LCD_FILL, "Starting Transfer...");
- lcd_clear();
+ XMODEM_PROGRESS("Starting Transfer...\n");
purge = true;
- ser_settimeouts(port, SER_DEFRXTIMEOUT, SER_DEFTXTIMEOUT);
ser_setstatus(port, 0);
/* Send initial NAK to start transmission */
for(;;)
{
- if (CHECK_ABORT)
+ if (XMODEM_CHECK_ABORT)
{
ser_putchar(XM_CAN, port);
ser_putchar(XM_CAN, port);
- lcd_printf(0, 2, LCD_FILL, "Transfer aborted");
+ XMODEM_PROGRESS("Transfer aborted\n");
return false;
}
{
purge = false;
- if (ser_getstatus())
- SerialError(retries);
+ if (ser_getstatus(port))
+ XMODEM_PROGRESS("Retries %d\n", retries);
ser_resync(port, 200);
retries++;
{
ser_putchar(XM_CAN, port);
ser_putchar(XM_CAN, port);
- lcd_printf(0, 2, LCD_FILL, "Transfer aborted");
+ XMODEM_PROGRESS("Transfer aborted\n");
return false;
}
{
if (retries < XM_MAXCRCRETRIES)
{
- lcd_printf(0, 2, LCD_FILL, "Request Tx (CRC)");
+ XMODEM_PROGRESS("Request Tx (CRC)\n");
ser_putchar(XM_C, port);
}
else
{
/* Give up with CRC and fall back to checksum */
usecrc = false;
- lcd_printf(0, 2, LCD_FILL, "Request Tx (BCC)");
+ XMODEM_PROGRESS("Request Tx (BCC)\n");
ser_putchar(XM_NAK, port);
}
}
switch (ser_getchar(port))
{
+ #if XM_BUFSIZE >= 1024
case XM_STX: /* Start of header (1024-byte block) */
blocksize = 1024;
goto getblock;
+ #endif
case XM_SOH: /* Start of header (128-byte block) */
blocksize = 128;
-
+ /* Needed to avoid warning if XM_BUFSIZE < 1024 */
+ goto getblock;
getblock:
/* Get block number */
c = ser_getchar(port);
/* Check complemented block number */
if ((~c & 0xff) != ser_getchar(port))
{
- lcd_printf(0, 3, LCD_FILL, "Bad blk (%d)", c);
+ XMODEM_PROGRESS("Bad blk (%d)\n", c);
purge = true;
break;
}
/* Determine which block is being sent */
if (c == (blocknr & 0xff))
/* Last block repeated */
- lcd_printf(0, 2, LCD_FILL, "Repeat blk %d", blocknr);
+ XMODEM_PROGRESS("Repeat blk %d\n", blocknr);
else if (c == ((blocknr + 1) & 0xff))
/* Next block */
- lcd_printf(0, 2, LCD_FILL, "Recv blk %d", ++blocknr);
+ XMODEM_PROGRESS("Recv blk %d\n", ++blocknr);
else
{
/* Sync lost */
- lcd_printf(0, 3, LCD_FILL, "Sync lost (%d/%d)", c, blocknr);
+ XMODEM_PROGRESS("Sync lost (%d/%d)\n", c, blocknr);
purge = true;
break;
}
if (crc)
{
- lcd_printf(0, 3, LCD_FILL, "Bad CRC: %04x", crc);
+ XMODEM_PROGRESS("Bad CRC: %04x\n", crc);
purge = true;
break;
}
/* Compare the checksum */
else if (c != checksum)
{
- lcd_printf(0, 3, LCD_FILL, "Bad sum: %04x/%04x", checksum, c);
+ XMODEM_PROGRESS("Bad sum: %04x/%04x\n", checksum, c);
purge = true;
break;
}
case XM_EOT: /* End of transmission */
ser_putchar(XM_ACK, port);
- lcd_printf(0, 2, LCD_FILL, "Transfer completed");
+ XMODEM_PROGRESS("Transfer completed\n");
return true;
case EOF: /* Timeout or serial error */
break;
default:
- lcd_printf(0, 3, LCD_FILL, "Skipping garbage");
+ XMODEM_PROGRESS("Skipping garbage\n");
purge = true;
break;
}
} /* End forever */
}
+#endif
+#if CONFIG_XMODEM_SEND
/**
- * \brief Transmit a file using the XModem protocol.
+ * \brief Transmit some data using the XModem protocol.
*
* \param port Serial port to use for transfer
* \param fd Source file
*
* \note This function allocates a large amount of stack for
- * the XModem transfer buffer (1KB).
+ * the XModem transfer buffer (\see XM_BUFSIZE).
*/
bool xmodem_send(struct Serial *port, KFile *fd)
{
uint16_t crc;
uint8_t sum;
+ /*
+ * Reading a block can be very slow, so we read the first block early
+ * to avoid receiving double XM_C char.
+ * This could happen if we check for XM_C and then read the block, giving
+ * the receiving device time to send another XM_C char misinterpretating
+ * the blocks sent.
+ */
+ size = fd->read(fd, block_buffer, XM_BUFSIZE);
- ser_settimeouts(port, SER_DEFRXTIMEOUT, SER_DEFTXTIMEOUT);
ser_setstatus(port, 0);
ser_purge(port);
- lcd_printf(0, 2, LCD_FILL, "Wait remote host");
+ XMODEM_PROGRESS("Wait remote host\n");
for(;;)
{
proceed = false;
do
{
- if (CHECK_ABORT)
+ if (XMODEM_CHECK_ABORT)
return false;
switch (c = ser_getchar(port))
{
case XM_NAK:
+ XMODEM_PROGRESS("Resend blk %d\n", blocknr);
+ proceed = true;
+ break;
+
case XM_C:
- if (blocknr == 1)
+ if (c == XM_C)
{
- if (c == XM_C)
- {
- lcd_printf(0, 2, LCD_FILL, "Tx start (CRC)");
- usecrc = true;
- }
- else
- lcd_printf(0, 2, LCD_FILL, "Tx start (BCC)");
-
- /* Call user function to read in one block */
- size = fd->read(fd, block_buffer, XM_BUFSIZE);
+ XMODEM_PROGRESS("Tx start (CRC)\n");
+ usecrc = true;
}
else
- lcd_printf(0, 2, LCD_FILL, "Resend blk %d", blocknr);
+ XMODEM_PROGRESS("Tx start (BCC)\n");
+
proceed = true;
break;
/* Call user function to read in one block */
size = fd->read(fd, block_buffer, XM_BUFSIZE);
+ XMODEM_PROGRESS("Send blk %d\n", blocknr);
blocknr++;
retries = 0;
proceed = true;
- lcd_printf(0, 2, LCD_FILL, "Send blk %d", blocknr);
break;
case EOF:
+ ser_setstatus(port, 0);
retries++;
- SerialError(retries);
+ XMODEM_PROGRESS("Retries %d\n", retries);
if (retries <= XM_MAXRETRIES)
break;
/* falling through! */
case XM_CAN:
- lcd_printf(0, 2, LCD_FILL, "Transfer aborted");
+ XMODEM_PROGRESS("Transfer aborted\n");
return false;
default:
- lcd_printf(0, 3, LCD_FILL, "Skipping garbage");
+ XMODEM_PROGRESS("Skipping garbage\n");
break;
}
}
memset(block_buffer + size, 0xFF, XM_BUFSIZE - size);
/* Send block header (STX, blocknr, ~blocknr) */
- ser_putchar(XM_STX, port);
+ #if XM_BUFSIZE == 128
+ ser_putchar(XM_SOH, port);
+ #else
+ ser_putchar(XM_STX, port);
+ #endif
ser_putchar(blocknr & 0xFF, port);
ser_putchar(~blocknr & 0xFF, port);
ser_putchar(sum, port);
}
}
+#endif