X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;ds=sidebyside;f=boards%2Fek-lpc-p2378%2Fhw%2Fhw_thermo.h;fp=boards%2Fek-lpc-p2378%2Fhw%2Fhw_thermo.h;h=0000000000000000000000000000000000000000;hb=c15b00a9a85e2aa3fdc681e63d7e92851035b63a;hp=de5edcc78a787fa0a5f3deae2b2aedbc7868c491;hpb=fd8bd1af65d3eaea3040d74df3d76b51577a67a6;p=bertos.git

diff --git a/boards/ek-lpc-p2378/hw/hw_thermo.h b/boards/ek-lpc-p2378/hw/hw_thermo.h
deleted file mode 100644
index de5edcc7..00000000
--- a/boards/ek-lpc-p2378/hw/hw_thermo.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/**
- * \file
- * <!--
- * This file is part of BeRTOS.
- *
- * Bertos is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- * As a special exception, you may use this file as part of a free software
- * library without restriction.  Specifically, if other files instantiate
- * templates or use macros or inline functions from this file, or you compile
- * this file and link it with other files to produce an executable, this
- * file does not by itself cause the resulting executable to be covered by
- * the GNU General Public License.  This exception does not however
- * invalidate any other reasons why the executable file might be covered by
- * the GNU General Public License.
- *
- * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
- * All Rights Reserved.
- * -->
- *
- * \brief thermo hardware-specific control functions.
- *
- * \version $Id: hw_thermo.h 1440 2008-06-10 17:59:13Z asterix $
- * \author Francesco Sacchi <batt@develer.com>
- *
- */
-
-#ifndef HW_THERMO_H
-#define HW_THERMO_H
-
-#include "thermo_map.h"
-#include "ntc_map.h"
-
-#include <drv/phase.h>
-#include <drv/ntc.h>
-
-#include <cfg/debug.h>
-#include <cfg/compiler.h>
-
-#warning TODO:This is an example implentation, you must implement it!
-
-/*!
- * This function should return the temperature set tolerance.
- */
-INLINE deg_t thermo_hw_tolerance(ThermoDev dev)
-{
-	ASSERT(dev < THERMO_CNT);
-
-	switch (dev)
-	{
-	case THERMO_TEST: 
-		/* Put here convertion function to temperature size */
-		break;
-
-	/* Put here your thermo device */
-
-	default:
-		ASSERT(0);
-	}
-
-	return 0;
-}
-
-
-/*!
- * This function should return the timeout for reaching the
- * target temperature.
- */
-INLINE ticks_t thermo_hw_timeout(ThermoDev dev)
-{
-	ASSERT(dev < THERMO_CNT);
-
-	switch (dev)
-	{
-	case THERMO_TEST:
-		/* return ms_to_ticks(60000); */
-		break;
-
-	/* Put here a time out for select thermo device */
-
-	default:
-		ASSERT(0);
-	}
-
-	return 0;
-}
-
-
-
-/*!
- * Read the temperature of the hw device \a dev.
- */
-INLINE deg_t thermo_hw_read(ThermoDev dev)
-{
-	return ntc_read(dev);
-}
-
-
-/*!
- * Turns off a specific device.
- * This function is usefull to handle errors.
- */
-INLINE void thermo_hw_off(ThermoDev dev)
-{
-	ASSERT(dev < THERMO_CNT);
-
-	switch (dev)
-	{
-	case THERMO_TEST:
-		phase_setPower(TRIAC_TEST, 0);
-		break;
-
-	/* Put here a thermo device to turn off */
-
-	default:
-		ASSERT(0);
-	}
-
-}
-
-
-/*!
- * Based on the current temperature \a cur_temp and the target temperature \a target, this function turns on and off specific
- * triac channel and handles the freezer alarm.
- * It may use also PID control for thermo-regolations.
- */
-INLINE void thermo_hw_set(ThermoDev dev, deg_t target, deg_t cur_temp)
-{
-	ASSERT(dev < THERMO_CNT);
-
-	deg_t dist = target - cur_temp;
-	//kprintf("dev[%d], dist[%d]\n", dev, dist);
-
-	switch(dev)
-	{
-	case THERMO_TEST:
-		if (dist > 0)
-		{
-			/*	phase_setPower(TRIAC_TEST, dist * PID_TEST_K); */
-		}
-		else
-		{
-			/* phase_setPower(TRIAC_TEST, 0); */
-		}
-		break;
-
-	/* Put here an other thermo device */
-
-	default:
-		ASSERT(0);
-	}
-}
-
-
-#define THERMO_HW_INIT	_thermo_hw_init()
-
-/*!
- * Init hw associated with thermo-control.
- */
-INLINE void _thermo_hw_init(void)
-{
-	ASSERT(phase_initialized);
-	ASSERT(ntc_initialized);
-
-	phase_setPower(TRIAC_TEST, 0);
-
-	/* Add here the other thermo device */
-}
-
-#endif /* HW_THERMO_H */