X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;ds=sidebyside;f=drv%2Fser.h;h=3af458d426a76db6bf8b4aa01bd01d917c81304d;hb=9f411c91637c328ec9475ce6732df2e66c8b53de;hp=40f27054385480472a4eb45267c69519ecfe67f7;hpb=ccb775e4fd44a656db65e0a6e75e815312ff2c61;p=bertos.git

diff --git a/drv/ser.h b/drv/ser.h
index 40f27054..3af458d4 100755
--- a/drv/ser.h
+++ b/drv/ser.h
@@ -14,6 +14,18 @@
 
 /*
  * $Log$
+ * Revision 1.9  2004/08/15 05:32:22  bernie
+ * ser_resync(): New function.
+ *
+ * Revision 1.8  2004/08/02 20:20:29  aleph
+ * Merge from project_ks
+ *
+ * Revision 1.7  2004/07/30 14:15:53  rasky
+ * Nuovo supporto unificato per detect della CPU
+ *
+ * Revision 1.6  2004/07/29 22:57:09  bernie
+ * ser_drain(): New function; Make Serial::is_open a debug-only feature; Switch to new-style CONFIG_* macros.
+ *
  * Revision 1.5  2004/07/18 21:54:23  bernie
  * Add ATmega8 support.
  *
@@ -30,9 +42,10 @@
 #ifndef DRV_SER_H
 #define DRV_SER_H
 
-#include "compiler.h"
 #include <mware/fifobuf.h>
-#include "config.h"
+#include <drv/kdebug.h>
+#include <compiler.h>
+#include <config.h>
 
 /*!
  * \name Serial Error/status flags
@@ -44,7 +57,7 @@
  *        which are from 0x0100 to 0x8000
  */
 /*\{*/
-#if defined(__AVR__)
+#if CPU_AVR
 	typedef uint8_t serstatus_t;
 
 	/* Software errors */
@@ -56,7 +69,7 @@
 	#define SERRF_RXSROVERRUN    BV(3)  /*!< Rx shift register overrun */
 	#define SERRF_FRAMEERROR     BV(4)  /*!< Stop bit missing */
 	#define SERRF_PARITYERROR    BV(7)  /*!< Parity error */
-#elif defined(__m56800__)
+#elif CPU_DSP56K
 	typedef uint16_t serstatus_t;
 
 	/* Software errors */
@@ -88,23 +101,22 @@
  */
 enum
 {
-#if defined(__AVR_ATmega64__)
+#if defined(CPU_AVR_ATMEGA64) || defined(CPU_AVR_ATMEGA128)
 	SER_UART0,
 	SER_UART1,
 	SER_SPI,
-#elif defined(__AVR_ATmega103__) || defined(__AVR_ATmega8__)
+#elif defined(CPU_AVR_ATMEGA103) || defined(CPU_AVR_ATMEGA8)
 	SER_UART0,
 	SER_SPI,
-#elif defined (__m56800__)
+#elif CPU_DSP56K
 	SER_UART0,
 	SER_UART1,
 #else
 	#error unknown architecture
 #endif
-
-	SER_CNT       /**< Number of serial ports */
+	SER_CNT  /*!< Number of serial ports */
 };
-/* @} */
+/*\}*/
 
 
 struct SerialHardware;
@@ -118,7 +130,7 @@ struct Serial
 	/*! Physical port number */
 	unsigned int unit;
 
-	bool is_open;
+	DB(bool is_open;)
 
 	/*!
 	 * \name FIFO transmit and receive buffers.
@@ -133,16 +145,16 @@ struct Serial
 	unsigned char rxbuffer[CONFIG_SER_RXBUFSIZE];
 	/* \} */
 
-#ifdef CONFIG_SER_RXTIMEOUT
+#if CONFIG_SER_RXTIMEOUT != -1
 	time_t rxtimeout;
 #endif
-#ifdef CONFIG_SER_TXTIMEOUT
+#if CONFIG_SER_TXTIMEOUT != -1
 	time_t txtimeout;
 #endif
 
 	/*! Holds the flags defined above.  Will be 0 when no errors have occurred. */
 	serstatus_t status;
-	
+
 	/*! Low-level interface to hardware. */
 	struct SerialHardware* hw;
 };
@@ -164,11 +176,10 @@ extern int ser_gets_echo(struct Serial *port, char *buf, int size, bool echo);
 
 extern void ser_setbaudrate(struct Serial *port, unsigned long rate);
 extern void ser_setparity(struct Serial *port, int parity);
+extern void ser_settimeouts(struct Serial *port, time_t rxtimeout, time_t txtimeout);
+extern void ser_resync(struct Serial *port, time_t delay);
 extern void ser_purge(struct Serial *port);
-
-#if defined(CONFIG_SER_RXTIMEOUT) || defined(CONFIG_SER_TXTIMEOUT)
-	extern void ser_settimeouts(struct Serial *port, time_t rxtimeout, time_t txtimeout);
-#endif
+extern void ser_drain(struct Serial *port);
 
 extern struct Serial *ser_open(unsigned int unit);
 extern void ser_close(struct Serial *port);