X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;ds=sidebyside;f=drv%2Ftwi.c;h=52112d2f5d7910e26b6ac595dc7a46b3a52f6b48;hb=9f4b16807dc3176506d06b73c1ab5d22bf2b38f5;hp=69f0d88d89bfb76e5f48d3bf299d91106a1ae6eb;hpb=af9c555446161016fdd76c1cdff96ce76bb6cba2;p=bertos.git

diff --git a/drv/twi.c b/drv/twi.c
index 69f0d88d..52112d2f 100755
--- a/drv/twi.c
+++ b/drv/twi.c
@@ -1,4 +1,4 @@
-/*!
+/**
  * \file
  * <!--
  * Copyright 2003, 2004, 2005 Develer S.r.l. (http://www.develer.com/)
@@ -15,6 +15,18 @@
 
 /*#*
  *#* $Log$
+ *#* Revision 1.8  2007/06/07 14:35:12  batt
+ *#* Merge from project_ks.
+ *#*
+ *#* Revision 1.7  2006/07/19 12:56:26  bernie
+ *#* Convert to new Doxygen style.
+ *#*
+ *#* Revision 1.6  2006/03/20 17:49:50  bernie
+ *#* Make the TWI driver more generic to work with devices other than EEPROMS.
+ *#*
+ *#* Revision 1.5  2005/11/27 23:33:40  bernie
+ *#* Use appconfig.h instead of cfg/config.h.
+ *#*
  *#* Revision 1.4  2005/04/11 19:10:28  bernie
  *#* Include top-level headers from cfg/ subdir.
  *#*
@@ -30,11 +42,12 @@
  *#*/
 
 #include "twi.h"
-#include <cfg/config.h>
+
 #include <cfg/debug.h>
-#include <hw.h>
 #include <cfg/cpu.h>
 #include <cfg/macros.h> // BV()
+#include <hw_cpu.h>  /* CLOCK_FREQ */
+#include <appconfig.h>
 
 #include <compat/twi.h>
 
@@ -42,14 +55,10 @@
 /* Wait for TWINT flag set: bus is ready */
 #define WAIT_TWI_READY  do {} while (!(TWCR & BV(TWINT)))
 
-/*! \name EEPROM control codes */
-/*@{*/
-#define SLA_W  0xA0
-#define SLA_R  0xA1
-/*@}*/
+#define READ_BIT BV(0)
 
 
-/*!
+/**
  * Send START condition on the bus.
  *
  * \return true on success, false otherwise.
@@ -67,15 +76,15 @@ static bool twi_start(void)
 }
 
 
-/*!
+/**
  * Send START condition and select slave for write.
+ * \c id is the device id comprehensive of address left shifted by 1.
+ * The LSB of \c id is ignored and reset to 0 for write operation.
  *
  * \return true on success, false otherwise.
  */
-bool twi_start_w(uint8_t slave_addr)
+bool twi_start_w(uint8_t id)
 {
-	ASSERT(slave_addr < 8);
-
 	/*
 	 * Loop on the select write sequence: when the eeprom is busy
 	 * writing previously sent data it will reply to the SLA_W
@@ -84,7 +93,7 @@ bool twi_start_w(uint8_t slave_addr)
 	 */
 	while (twi_start())
 	{
-		TWDR = SLA_W | (slave_addr << 1);
+		TWDR = id & ~READ_BIT;
 		TWCR = BV(TWINT) | BV(TWEN);
 		WAIT_TWI_READY;
 
@@ -101,18 +110,18 @@ bool twi_start_w(uint8_t slave_addr)
 }
 
 
-/*!
+/**
  * Send START condition and select slave for read.
+ * \c id is the device id comprehensive of address left shifted by 1.
+ * The LSB of \c id is ignored and set to 1 for read operation.
  *
  * \return true on success, false otherwise.
  */
-bool twi_start_r(uint8_t slave_addr)
+bool twi_start_r(uint8_t id)
 {
-	ASSERT(slave_addr < 8);
-
 	if (twi_start())
 	{
-		TWDR = SLA_R | (slave_addr << 1);
+		TWDR = id | READ_BIT;
 		TWCR = BV(TWINT) | BV(TWEN);
 		WAIT_TWI_READY;
 
@@ -126,16 +135,36 @@ bool twi_start_r(uint8_t slave_addr)
 }
 
 
-/*!
+/**
  * Send STOP condition.
  */
 void twi_stop(void)
 {
-	TWCR = BV(TWINT) | BV(TWEN) | BV(TWSTO);
+        TWCR = BV(TWINT) | BV(TWEN) | BV(TWSTO);
+}
+
+
+/**
+ * Put a single byte in master transmitter mode
+ * to the selected slave device through the TWI bus.
+ *
+ * \return true on success, false on error.
+ */
+bool twi_put(const uint8_t data)
+{
+	TWDR = data;
+	TWCR = BV(TWINT) | BV(TWEN);
+	WAIT_TWI_READY;
+	if (TW_STATUS != TW_MT_DATA_ACK)
+	{
+		kprintf("!TW_MT_DATA_ACK: %x\n", TWSR);
+		return false;
+	}
+	return true;
 }
 
 
-/*!
+/**
  * Send a sequence of bytes in master transmitter mode
  * to the selected slave device through the TWI bus.
  *
@@ -147,21 +176,14 @@ bool twi_send(const void *_buf, size_t count)
 
 	while (count--)
 	{
-		TWDR = *buf++;
-		TWCR = BV(TWINT) | BV(TWEN);
-		WAIT_TWI_READY;
-		if (TW_STATUS != TW_MT_DATA_ACK)
-		{
-			kprintf("!TW_MT_DATA_ACK: %x\n", TWSR);
+		if (!twi_put(*buf++))
 			return false;
-		}
 	}
-
 	return true;
 }
 
 
-/*!
+/**
  * Receive a sequence of one or more bytes from the
  * selected slave device in master receive mode through
  * the TWI bus.
@@ -206,7 +228,7 @@ bool twi_recv(void *_buf, size_t count)
 }
 
 
-/*!
+/**
  * Initialize TWI module.
  */
 void twi_init(void)
@@ -219,12 +241,12 @@ void twi_init(void)
 		 * probably due to some unwanted interaction between the
 		 * port pin and the TWI lines.
 		 */
-#if defined(__AVR_ATmega64__)
+#if CPU_AVR_ATMEGA64 || CPU_AVR_ATMEGA128 || CPU_AVR_ATMEGA1281
 		PORTD |= BV(PD0) | BV(PD1);
-		DDRD |= BV(PD0) | BV(PD1);
-#elif defined(__AVR_ATmega8__)
+		DDRD  |= BV(PD0) | BV(PD1);
+#elif CPU_AVR_ATMEGA8
 		PORTC |= BV(PC4) | BV(PC5);
-		DDRC |= BV(PC4) | BV(PC5);
+		DDRC  |= BV(PC4) | BV(PC5);
 #else
 		#error Unsupported architecture
 #endif