X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=app%2Fdemo%2Fappconfig.h;h=4361d0f07716a3df1413e7472227aed1a0e56849;hb=261b1d1914bced4c841a2ecd2d31340852bbc2b8;hp=a536017d0b5582cefb22e5c9a3be94218ad0bf98;hpb=afc25af626cab36ddba3fadb9409c7240f8c6011;p=bertos.git

diff --git a/app/demo/appconfig.h b/app/demo/appconfig.h
old mode 100755
new mode 100644
index a536017d..4361d0f0
--- a/app/demo/appconfig.h
+++ b/app/demo/appconfig.h
@@ -1,8 +1,33 @@
-/*!
+/**
  * \file
  * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
  * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
- * This file is part of DevLib - See README.devlib for information.
+ *
  * -->
  *
  * \brief DevLib configuration options
@@ -44,55 +69,17 @@
  * \author Stefano Fedrigo <aleph@develer.com>
  */
 
-/*#*
- *#* $Log$
- *#* Revision 1.1  2006/05/27 22:31:57  bernie
- *#* Add appconfig.h for demo app.
- *#*
- *#* Revision 1.1  2006/05/18 00:40:43  bernie
- *#* Rename appconfig.h to appconfig_common.h.
- *#*
- *#* Revision 1.11  2006/04/11 00:08:53  bernie
- *#* Add smooth scrolling for menus.
- *#*
- *#* Revision 1.10  2006/03/22 09:48:51  bernie
- *#* Add a few more config options.
- *#*
- *#* Revision 1.9  2006/02/24 00:27:35  bernie
- *#* Enable kernel and fix Doxygen markup.
- *#*
- *#* Revision 1.8  2006/02/21 16:06:05  bernie
- *#* Update copyright info.
- *#*
- *#* Revision 1.7  2006/02/17 22:28:19  bernie
- *#* Add missing UART definitions.
- *#*
- *#* Revision 1.6  2006/02/15 09:12:56  bernie
- *#* Switch to BITMAP_FMT_PLANAR_V_LSB.
- *#*
- *#* Revision 1.5  2006/02/10 12:34:33  bernie
- *#* Add missing config options for gfx and kbd.
- *#*
- *#* Revision 1.4  2006/01/23 23:12:27  bernie
- *#* Enable CONFIG_GFX_VCOORDS.
- *#*
- *#* Revision 1.3  2006/01/17 02:30:06  bernie
- *#* Add new config vars.
- *#*
- *#* Revision 1.2  2005/11/27 03:04:57  bernie
- *#* CONFIG_WATCHDOG: New config option.
- *#*
- *#* Revision 1.1  2005/11/04 17:42:12  bernie
- *#* Move cfg/config.h to appconfig.h.
- *#*/
-
-#ifndef CONFIG_COMMON_H
-#define CONFIG_COMMON_H
-
-/*! Baud-rate for the kdebug console */
+#ifndef APPCONFIG_COMMON_H
+#define APPCONFIG_COMMON_H
+
+/** kdebug console */
+#define CONFIG_KDEBUG_PORT 0
+
+
+/** Baud-rate for the kdebug console */
 #define CONFIG_KDEBUG_BAUDRATE  19200
 
-/*!
+/**
  * printf()-style formatter configuration.
  *
  * \sa PRINTF_DISABLED
@@ -103,54 +90,66 @@
  */
 #define CONFIG_PRINTF PRINTF_FULL
 
-/*!
+/**
  * Multithreading kernel.
  *
  * \sa config_kern.h
  */
-#define CONFIG_KERNEL 1
+#define CONFIG_KERNEL 0
 
-/*!
+/**
  * \name Serial driver parameters
  * \{
  */
-	/*! [bytes] Size of the outbound FIFO buffer for port 0. */
+	/** [bytes] Size of the outbound FIFO buffer for port 0. */
 	#define CONFIG_UART0_TXBUFSIZE  32
 
-	/*! [bytes] Size of the inbound FIFO buffer for port 0. */
+	/** [bytes] Size of the inbound FIFO buffer for port 0. */
 	#define CONFIG_UART0_RXBUFSIZE  64
 
-	/*! [bytes] Size of the outbound FIFO buffer for port 1. */
+	/** [bytes] Size of the outbound FIFO buffer for port 1. */
 	#define CONFIG_UART1_TXBUFSIZE  32
 
-	/*! [bytes] Size of the inbound FIFO buffer for port 1. */
+	/** [bytes] Size of the inbound FIFO buffer for port 1. */
 	#define CONFIG_UART1_RXBUFSIZE  64
 
-	/*! [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
+	/** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
 	#define CONFIG_SPI_TXBUFSIZE	16
 
-	/*! [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
+	/** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
 	#define CONFIG_SPI_RXBUFSIZE	32
 
-	/*! Default transmit timeout (ms). Set to -1 to disable timeout support */
+	/** SPI data order (AVR only). */
+	#define CONFIG_SPI_DATA_ORDER	SER_MSB_FIRST
+
+	/** SPI clock division factor (AVR only). */
+	#define CONFIG_SPI_CLOCK_DIV	16
+
+	/** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
+	#define CONFIG_SPI_CLOCK_POL	0
+
+	/** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
+	#define CONFIG_SPI_CLOCK_PHASE	0
+
+	/** Default transmit timeout (ms). Set to -1 to disable timeout support */
 	#define CONFIG_SER_TXTIMEOUT    -1
 
-	/*! Default receive timeout (ms). Set to -1 to disable timeout support */
+	/** Default receive timeout (ms). Set to -1 to disable timeout support */
 	#define CONFIG_SER_RXTIMEOUT    -1
 
-	/*! Use RTS/CTS handshake */
+	/** Use RTS/CTS handshake */
 	#define CONFIG_SER_HWHANDSHAKE   0
 
-	/*! Default baud rate (set to 0 to disable) */
+	/** Default baud rate (set to 0 to disable) */
 	#define CONFIG_SER_DEFBAUDRATE   0
 
-	/*! Enable ser_gets() and ser_gets_echo() */
+	/** Enable ser_gets() and ser_gets_echo() */
 	#define CONFIG_SER_GETS          0
 
 	/** Enable second serial port in emulator. */
 	#define CONFIG_EMUL_UART1        0
 
-	/*!
+	/**
 	 * Transmit always something on serial port 0 TX
 	 * to avoid interference when sending burst of data,
 	 * using AVR multiprocessor serial mode
@@ -160,29 +159,32 @@
 	#define CONFIG_SER_STROBE        0
 /*\}*/
 
-//! Hardware timer selection for drv/timer.c
+/// Hardware timer selection for drv/timer.c
 #define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE2
 
-//! Debug timer interrupt using a strobe pin.
+/// Debug timer interrupt using a strobe pin.
 #define CONFIG_TIMER_STROBE  0
 
-//! Enable watchdog timer.
-#define CONFIG_WATCHDOG  1
+/// Enable ADS strobe.
+#define CONFIG_ADC_STROBE  0
 
-//! EEPROM type for drv/eeprom.c
+/// Enable watchdog timer.
+#define CONFIG_WATCHDOG  0
+
+/// EEPROM type for drv/eeprom.c
 #define CONFIG_EEPROM_TYPE EEPROM_24XX256
 
 /// Select bitmap pixel format.
 #define CONFIG_BITMAP_FMT  BITMAP_FMT_PLANAR_V_LSB
 
 /// Enable line clipping algorithm.
-#define CONFIG_GFX_CLIPPING 1
+#define CONFIG_GFX_CLIPPING  1
 
 /// Enable text rendering in bitmaps.
-#define CONFIG_GFX_TEXT 1
+#define CONFIG_GFX_TEXT  1
 
 /// Enable virtual coordinate system.
-#define CONFIG_GFX_VCOORDS 1
+#define CONFIG_GFX_VCOORDS  1
 
 /// Keyboard polling method
 #define CONFIG_KBD_POLL  KBD_POLL_SOFTINT
@@ -190,10 +192,13 @@
 /// Enable keyboard event delivery to observers
 #define CONFIG_KBD_OBSERVER  0
 
-/// Enable key beeps.
+/// Enable key beeps
 #define CONFIG_KBD_BEEP  1
 
-/*!
+/// Enable long pression handler for keys
+#define CONFIG_KBD_LONGPRESS  1
+
+/**
  * \name Type for the chart dataset
  * \{
  */
@@ -204,13 +209,19 @@
 /// Enable button bar behind menus
 #define CONFIG_MENU_MENUBAR  0
 
-/// Enable smooth scrolling in menus.
+/// Enable smooth scrolling in menus
 #define CONFIG_MENU_SMOOTH  1
 
-/// Abort menu after this amount of time.
-#define CONFIG_MENU_TIMEOUT 3000 /* ms */
+/// Size of block for MD2 algorithm.
+#define CONFIG_MD2_BLOCK_LEN 16
+
+/// Use standard permutation in MD2 algorithm.
+#define CONFIG_MD2_STD_PERM 0
+
+/// Define a size, in byte, of entropy pool.
+#define CONFIG_SIZE_ENTROPY_POOL 64
 
-/// Accept input implicitly after this amount of time.
-#define CONFIG_LEVELEDIT_TIMEOUT 3000 /* ms */
+/// Turn on or off timer support in Randpool.
+#define CONFIG_RANDPOOL_TIMER 1
 
-#endif /* CONFIG_COMMON_H */
+#endif /* APPCONFIG_H */