X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=app%2Fdemo%2Fappconfig.h;h=d46212dd7582e17991061f86ba7aca50aea0c896;hb=5f3952176a4e9a00ca8dd5ec4a6b994958f89e0a;hp=70a02afaaf1ffee12faf27543972e6219c7d65d4;hpb=b25aabb82dd47404b0697e1394fd3a14963e1224;p=bertos.git

diff --git a/app/demo/appconfig.h b/app/demo/appconfig.h
old mode 100755
new mode 100644
index 70a02afa..d46212dd
--- a/app/demo/appconfig.h
+++ b/app/demo/appconfig.h
@@ -1,4 +1,4 @@
-/*!
+/**
  * \file
  * <!--
  * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
@@ -46,6 +46,15 @@
 
 /*#*
  *#* $Log$
+ *#* Revision 1.5  2006/09/20 19:55:01  marco
+ *#* Added CONFIG_LCD_4BIT.
+ *#*
+ *#* Revision 1.4  2006/09/13 18:29:22  bernie
+ *#* Add a few missing CONFIG_ definitions.
+ *#*
+ *#* Revision 1.3  2006/07/19 12:56:24  bernie
+ *#* Convert to new Doxygen style.
+ *#*
  *#* Revision 1.2  2006/05/28 12:18:12  bernie
  *#* Disable menu timeout.
  *#*
@@ -89,13 +98,13 @@
  *#* Move cfg/config.h to appconfig.h.
  *#*/
 
-#ifndef CONFIG_COMMON_H
-#define CONFIG_COMMON_H
+#ifndef APPCONFIG_H
+#define APPCONFIG_H
 
-/*! Baud-rate for the kdebug console */
+/** Baud-rate for the kdebug console */
 #define CONFIG_KDEBUG_BAUDRATE  19200
 
-/*!
+/**
  * printf()-style formatter configuration.
  *
  * \sa PRINTF_DISABLED
@@ -106,54 +115,54 @@
  */
 #define CONFIG_PRINTF PRINTF_FULL
 
-/*!
+/**
  * Multithreading kernel.
  *
  * \sa config_kern.h
  */
 #define CONFIG_KERNEL 1
 
-/*!
+/**
  * \name Serial driver parameters
  * \{
  */
-	/*! [bytes] Size of the outbound FIFO buffer for port 0. */
+	/** [bytes] Size of the outbound FIFO buffer for port 0. */
 	#define CONFIG_UART0_TXBUFSIZE  32
 
-	/*! [bytes] Size of the inbound FIFO buffer for port 0. */
+	/** [bytes] Size of the inbound FIFO buffer for port 0. */
 	#define CONFIG_UART0_RXBUFSIZE  64
 
-	/*! [bytes] Size of the outbound FIFO buffer for port 1. */
+	/** [bytes] Size of the outbound FIFO buffer for port 1. */
 	#define CONFIG_UART1_TXBUFSIZE  32
 
-	/*! [bytes] Size of the inbound FIFO buffer for port 1. */
+	/** [bytes] Size of the inbound FIFO buffer for port 1. */
 	#define CONFIG_UART1_RXBUFSIZE  64
 
-	/*! [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
+	/** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
 	#define CONFIG_SPI_TXBUFSIZE	16
 
-	/*! [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
+	/** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
 	#define CONFIG_SPI_RXBUFSIZE	32
 
-	/*! Default transmit timeout (ms). Set to -1 to disable timeout support */
+	/** Default transmit timeout (ms). Set to -1 to disable timeout support */
 	#define CONFIG_SER_TXTIMEOUT    -1
 
-	/*! Default receive timeout (ms). Set to -1 to disable timeout support */
+	/** Default receive timeout (ms). Set to -1 to disable timeout support */
 	#define CONFIG_SER_RXTIMEOUT    -1
 
-	/*! Use RTS/CTS handshake */
+	/** Use RTS/CTS handshake */
 	#define CONFIG_SER_HWHANDSHAKE   0
 
-	/*! Default baud rate (set to 0 to disable) */
+	/** Default baud rate (set to 0 to disable) */
 	#define CONFIG_SER_DEFBAUDRATE   0
 
-	/*! Enable ser_gets() and ser_gets_echo() */
+	/** Enable ser_gets() and ser_gets_echo() */
 	#define CONFIG_SER_GETS          0
 
 	/** Enable second serial port in emulator. */
 	#define CONFIG_EMUL_UART1        0
 
-	/*!
+	/**
 	 * Transmit always something on serial port 0 TX
 	 * to avoid interference when sending burst of data,
 	 * using AVR multiprocessor serial mode
@@ -163,16 +172,16 @@
 	#define CONFIG_SER_STROBE        0
 /*\}*/
 
-//! Hardware timer selection for drv/timer.c
+/// Hardware timer selection for drv/timer.c
 #define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE2
 
-//! Debug timer interrupt using a strobe pin.
+/// Debug timer interrupt using a strobe pin.
 #define CONFIG_TIMER_STROBE  0
 
-//! Enable watchdog timer.
+/// Enable watchdog timer.
 #define CONFIG_WATCHDOG  1
 
-//! EEPROM type for drv/eeprom.c
+/// EEPROM type for drv/eeprom.c
 #define CONFIG_EEPROM_TYPE EEPROM_24XX256
 
 /// Select bitmap pixel format.
@@ -196,7 +205,10 @@
 /// Enable key beeps.
 #define CONFIG_KBD_BEEP  1
 
-/*!
+/// Enable long pression handler for keys
+#define CONFIG_KBD_LONGPRESS  0
+
+/**
  * \name Type for the chart dataset
  * \{
  */
@@ -216,4 +228,7 @@
 /// Accept input implicitly after this amount of time.
 #define CONFIG_LEVELEDIT_TIMEOUT 3000 /* ms */
 
-#endif /* CONFIG_COMMON_H */
+/// LCD bus size. If 0 use 8bit bus.
+#define CONFIG_LCD_4BIT 0
+
+#endif /* APPCONFIG_H */