X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=app%2Fdemo%2Fappconfig.h;h=f9ff031f407e55647599029f62e892bde57eada5;hb=8ed6318f92444e347d2043f585362bc4b1107f84;hp=70a02afaaf1ffee12faf27543972e6219c7d65d4;hpb=b25aabb82dd47404b0697e1394fd3a14963e1224;p=bertos.git

diff --git a/app/demo/appconfig.h b/app/demo/appconfig.h
old mode 100755
new mode 100644
index 70a02afa..f9ff031f
--- a/app/demo/appconfig.h
+++ b/app/demo/appconfig.h
@@ -1,8 +1,33 @@
-/*!
+/**
  * \file
  * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
  * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
- * This file is part of DevLib - See README.devlib for information.
+ *
  * -->
  *
  * \brief DevLib configuration options
@@ -39,13 +64,22 @@
  * In most cases, we rely on the optimizer to discard checks
  * on constant values and performing dead-code elimination.
  *
- * \version $Id$
+ * \version $Id: appconfig.h 18242 2007-10-08 17:35:23Z marco $
  * \author Bernardo Innocenti <bernie@develer.com>
  * \author Stefano Fedrigo <aleph@develer.com>
  */
 
 /*#*
  *#* $Log$
+ *#* Revision 1.5  2006/09/20 19:55:01  marco
+ *#* Added CONFIG_LCD_4BIT.
+ *#*
+ *#* Revision 1.4  2006/09/13 18:29:22  bernie
+ *#* Add a few missing CONFIG_ definitions.
+ *#*
+ *#* Revision 1.3  2006/07/19 12:56:24  bernie
+ *#* Convert to new Doxygen style.
+ *#*
  *#* Revision 1.2  2006/05/28 12:18:12  bernie
  *#* Disable menu timeout.
  *#*
@@ -89,13 +123,13 @@
  *#* Move cfg/config.h to appconfig.h.
  *#*/
 
-#ifndef CONFIG_COMMON_H
-#define CONFIG_COMMON_H
+#ifndef APPCONFIG_H
+#define APPCONFIG_H
 
-/*! Baud-rate for the kdebug console */
+/** Baud-rate for the kdebug console */
 #define CONFIG_KDEBUG_BAUDRATE  19200
 
-/*!
+/**
  * printf()-style formatter configuration.
  *
  * \sa PRINTF_DISABLED
@@ -106,54 +140,54 @@
  */
 #define CONFIG_PRINTF PRINTF_FULL
 
-/*!
+/**
  * Multithreading kernel.
  *
  * \sa config_kern.h
  */
 #define CONFIG_KERNEL 1
 
-/*!
+/**
  * \name Serial driver parameters
  * \{
  */
-	/*! [bytes] Size of the outbound FIFO buffer for port 0. */
+	/** [bytes] Size of the outbound FIFO buffer for port 0. */
 	#define CONFIG_UART0_TXBUFSIZE  32
 
-	/*! [bytes] Size of the inbound FIFO buffer for port 0. */
+	/** [bytes] Size of the inbound FIFO buffer for port 0. */
 	#define CONFIG_UART0_RXBUFSIZE  64
 
-	/*! [bytes] Size of the outbound FIFO buffer for port 1. */
+	/** [bytes] Size of the outbound FIFO buffer for port 1. */
 	#define CONFIG_UART1_TXBUFSIZE  32
 
-	/*! [bytes] Size of the inbound FIFO buffer for port 1. */
+	/** [bytes] Size of the inbound FIFO buffer for port 1. */
 	#define CONFIG_UART1_RXBUFSIZE  64
 
-	/*! [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
+	/** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
 	#define CONFIG_SPI_TXBUFSIZE	16
 
-	/*! [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
+	/** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
 	#define CONFIG_SPI_RXBUFSIZE	32
 
-	/*! Default transmit timeout (ms). Set to -1 to disable timeout support */
+	/** Default transmit timeout (ms). Set to -1 to disable timeout support */
 	#define CONFIG_SER_TXTIMEOUT    -1
 
-	/*! Default receive timeout (ms). Set to -1 to disable timeout support */
+	/** Default receive timeout (ms). Set to -1 to disable timeout support */
 	#define CONFIG_SER_RXTIMEOUT    -1
 
-	/*! Use RTS/CTS handshake */
+	/** Use RTS/CTS handshake */
 	#define CONFIG_SER_HWHANDSHAKE   0
 
-	/*! Default baud rate (set to 0 to disable) */
+	/** Default baud rate (set to 0 to disable) */
 	#define CONFIG_SER_DEFBAUDRATE   0
 
-	/*! Enable ser_gets() and ser_gets_echo() */
+	/** Enable ser_gets() and ser_gets_echo() */
 	#define CONFIG_SER_GETS          0
 
 	/** Enable second serial port in emulator. */
 	#define CONFIG_EMUL_UART1        0
 
-	/*!
+	/**
 	 * Transmit always something on serial port 0 TX
 	 * to avoid interference when sending burst of data,
 	 * using AVR multiprocessor serial mode
@@ -163,16 +197,16 @@
 	#define CONFIG_SER_STROBE        0
 /*\}*/
 
-//! Hardware timer selection for drv/timer.c
+/// Hardware timer selection for drv/timer.c
 #define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE2
 
-//! Debug timer interrupt using a strobe pin.
+/// Debug timer interrupt using a strobe pin.
 #define CONFIG_TIMER_STROBE  0
 
-//! Enable watchdog timer.
+/// Enable watchdog timer.
 #define CONFIG_WATCHDOG  1
 
-//! EEPROM type for drv/eeprom.c
+/// EEPROM type for drv/eeprom.c
 #define CONFIG_EEPROM_TYPE EEPROM_24XX256
 
 /// Select bitmap pixel format.
@@ -196,7 +230,10 @@
 /// Enable key beeps.
 #define CONFIG_KBD_BEEP  1
 
-/*!
+/// Enable long pression handler for keys
+#define CONFIG_KBD_LONGPRESS  0
+
+/**
  * \name Type for the chart dataset
  * \{
  */
@@ -216,4 +253,7 @@
 /// Accept input implicitly after this amount of time.
 #define CONFIG_LEVELEDIT_TIMEOUT 3000 /* ms */
 
-#endif /* CONFIG_COMMON_H */
+/// LCD bus size. If 0 use 8bit bus.
+#define CONFIG_LCD_4BIT 0
+
+#endif /* APPCONFIG_H */