X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=app%2Ftriface%2Fappconfig.h;h=2308f234e95f2f841d283c4b2d96f7f6a6b9c1c0;hb=9ba9dcf2a59a952609e19154e11de3e2478cbf42;hp=31ee1e854c51f9b588e9a67cc4f0a270c4875533;hpb=f7c30da5c75281bd2dfba133529a7ac1fa31e6b1;p=bertos.git

diff --git a/app/triface/appconfig.h b/app/triface/appconfig.h
old mode 100755
new mode 100644
index 31ee1e85..2308f234
--- a/app/triface/appconfig.h
+++ b/app/triface/appconfig.h
@@ -1,8 +1,33 @@
-/*!
+/**
  * \file
  * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
  * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
- * This file is part of DevLib - See README.devlib for information.
+ *
  * -->
  *
  * \brief DevLib configuration options
@@ -46,6 +71,15 @@
 
 /*#*
  *#* $Log$
+ *#* Revision 1.5  2006/09/20 13:54:40  marco
+ *#* Added new SPI definitions.
+ *#*
+ *#* Revision 1.4  2006/07/19 12:56:25  bernie
+ *#* Convert to new Doxygen style.
+ *#*
+ *#* Revision 1.3  2006/06/12 21:37:01  marco
+ *#* implemented some commands (ver and sleep)
+ *#*
  *#* Revision 1.2  2006/06/01 12:29:21  marco
  *#* Add first simple protocol command (version request).
  *#*
@@ -104,6 +138,18 @@
 	/** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
 	#define CONFIG_SPI_RXBUFSIZE	32
 
+	/** SPI data order (AVR only). */
+	#define CONFIG_SPI_DATA_ORDER	SER_MSB_FIRST
+
+	/** SPI clock division factor (AVR only). */
+	#define CONFIG_SPI_CLOCK_DIV	16
+
+	/** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
+	#define CONFIG_SPI_CLOCK_POL	0
+
+	/** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
+	#define CONFIG_SPI_CLOCK_PHASE	0
+
 	/** Default transmit timeout (ms). Set to -1 to disable timeout support */
 	#define CONFIG_SER_TXTIMEOUT    -1
 
@@ -133,7 +179,7 @@
 /*\}*/
 
 /// Hardware timer selection for drv/timer.c
-#define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE2
+#define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE0
 
 /// Debug timer interrupt using a strobe pin.
 #define CONFIG_TIMER_STROBE  0