X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=appconfig_common.h;h=746ff1a64d07ca6d0869195836a121a44b0c344f;hb=e39b351c443b613123d5e8ab310e2b4b8663e71c;hp=fc6a0b2248bb2c3830396fe7a768c10ffe0ae1ab;hpb=88e768c20e4347e1bf1101c8d941ff3797940cff;p=bertos.git diff --git a/appconfig_common.h b/appconfig_common.h old mode 100755 new mode 100644 index fc6a0b22..746ff1a6 --- a/appconfig_common.h +++ b/appconfig_common.h @@ -1,8 +1,33 @@ -/*! +/** * \file * * * \brief DevLib configuration options @@ -44,52 +69,16 @@ * \author Stefano Fedrigo */ -/*#* - *#* $Log$ - *#* Revision 1.1 2006/05/18 00:40:43 bernie - *#* Rename appconfig.h to appconfig_common.h. - *#* - *#* Revision 1.11 2006/04/11 00:08:53 bernie - *#* Add smooth scrolling for menus. - *#* - *#* Revision 1.10 2006/03/22 09:48:51 bernie - *#* Add a few more config options. - *#* - *#* Revision 1.9 2006/02/24 00:27:35 bernie - *#* Enable kernel and fix Doxygen markup. - *#* - *#* Revision 1.8 2006/02/21 16:06:05 bernie - *#* Update copyright info. - *#* - *#* Revision 1.7 2006/02/17 22:28:19 bernie - *#* Add missing UART definitions. - *#* - *#* Revision 1.6 2006/02/15 09:12:56 bernie - *#* Switch to BITMAP_FMT_PLANAR_V_LSB. - *#* - *#* Revision 1.5 2006/02/10 12:34:33 bernie - *#* Add missing config options for gfx and kbd. - *#* - *#* Revision 1.4 2006/01/23 23:12:27 bernie - *#* Enable CONFIG_GFX_VCOORDS. - *#* - *#* Revision 1.3 2006/01/17 02:30:06 bernie - *#* Add new config vars. - *#* - *#* Revision 1.2 2005/11/27 03:04:57 bernie - *#* CONFIG_WATCHDOG: New config option. - *#* - *#* Revision 1.1 2005/11/04 17:42:12 bernie - *#* Move cfg/config.h to appconfig.h. - *#*/ - -#ifndef CONFIG_COMMON_H -#define CONFIG_COMMON_H - -/*! Baud-rate for the kdebug console */ +#ifndef APPCONFIG_COMMON_H +#define APPCONFIG_COMMON_H + +/** kdebug console */ +#define CONFIG_KDEBUG_PORT 0 + +/** Baud-rate for the kdebug console */ #define CONFIG_KDEBUG_BAUDRATE 19200 -/*! +/** * printf()-style formatter configuration. * * \sa PRINTF_DISABLED @@ -100,54 +89,72 @@ */ #define CONFIG_PRINTF PRINTF_FULL -/*! +/** * Multithreading kernel. * * \sa config_kern.h */ -#define CONFIG_KERNEL 1 +#define CONFIG_KERNEL 0 -/*! +/** * \name Serial driver parameters * \{ */ - /*! [bytes] Size of the outbound FIFO buffer for port 0. */ + /** [bytes] Size of the outbound FIFO buffer for port 0. */ #define CONFIG_UART0_TXBUFSIZE 32 - /*! [bytes] Size of the inbound FIFO buffer for port 0. */ + /** [bytes] Size of the inbound FIFO buffer for port 0. */ #define CONFIG_UART0_RXBUFSIZE 64 - /*! [bytes] Size of the outbound FIFO buffer for port 1. */ + /** [bytes] Size of the outbound FIFO buffer for port 1. */ #define CONFIG_UART1_TXBUFSIZE 32 - /*! [bytes] Size of the inbound FIFO buffer for port 1. */ - #define CONFIG_UART1_RXBUFSIZE 64 + /** [bytes] Size of the inbound FIFO buffer for port 1. */ + #define CONFIG_UART1_RXBUFSIZE CONFIG_PROTOCOL_BUFLEN + + /** [bytes] Size of the outbound FIFO buffer for SPI port 0. */ + #define CONFIG_SPI0_TXBUFSIZE 16 + + /** [bytes] Size of the inbound FIFO buffer for SPI port 0. */ + #define CONFIG_SPI0_RXBUFSIZE 32 + + /** [bytes] Size of the outbound FIFO buffer for SPI port 1. */ + #define CONFIG_SPI1_TXBUFSIZE 16 + + /** [bytes] Size of the inbound FIFO buffer for SPI port 1. */ + #define CONFIG_SPI1_RXBUFSIZE 32 - /*! [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */ - #define CONFIG_SPI_TXBUFSIZE 16 + /** SPI data order (AVR only). */ + #define CONFIG_SPI_DATA_ORDER SER_MSB_FIRST - /*! [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */ - #define CONFIG_SPI_RXBUFSIZE 32 + /** SPI clock division factor (AVR only). */ + #define CONFIG_SPI_CLOCK_DIV 16 - /*! Default transmit timeout (ms). Set to -1 to disable timeout support */ + /** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */ + #define CONFIG_SPI_CLOCK_POL 0 + + /** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */ + #define CONFIG_SPI_CLOCK_PHASE 0 + + /** Default transmit timeout (ms). Set to -1 to disable timeout support */ #define CONFIG_SER_TXTIMEOUT -1 - /*! Default receive timeout (ms). Set to -1 to disable timeout support */ + /** Default receive timeout (ms). Set to -1 to disable timeout support */ #define CONFIG_SER_RXTIMEOUT -1 - /*! Use RTS/CTS handshake */ + /** Use RTS/CTS handshake */ #define CONFIG_SER_HWHANDSHAKE 0 - /*! Default baud rate (set to 0 to disable) */ + /** Default baud rate (set to 0 to disable) */ #define CONFIG_SER_DEFBAUDRATE 0 - /*! Enable ser_gets() and ser_gets_echo() */ + /** Enable ser_gets() and ser_gets_echo() */ #define CONFIG_SER_GETS 0 /** Enable second serial port in emulator. */ #define CONFIG_EMUL_UART1 0 - /*! + /** * Transmit always something on serial port 0 TX * to avoid interference when sending burst of data, * using AVR multiprocessor serial mode @@ -157,29 +164,32 @@ #define CONFIG_SER_STROBE 0 /*\}*/ -//! Hardware timer selection for drv/timer.c +/// Hardware timer selection for drv/timer.c #define CONFIG_TIMER TIMER_ON_OUTPUT_COMPARE2 -//! Debug timer interrupt using a strobe pin. +/// Debug timer interrupt using a strobe pin. #define CONFIG_TIMER_STROBE 0 -//! Enable watchdog timer. -#define CONFIG_WATCHDOG 1 +/// Enable ADS strobe. +#define CONFIG_ADC_STROBE 0 + +/// Enable watchdog timer. +#define CONFIG_WATCHDOG 0 -//! EEPROM type for drv/eeprom.c +/// EEPROM type for drv/eeprom.c #define CONFIG_EEPROM_TYPE EEPROM_24XX256 /// Select bitmap pixel format. #define CONFIG_BITMAP_FMT BITMAP_FMT_PLANAR_V_LSB /// Enable line clipping algorithm. -#define CONFIG_GFX_CLIPPING 1 +#define CONFIG_GFX_CLIPPING 1 /// Enable text rendering in bitmaps. -#define CONFIG_GFX_TEXT 1 +#define CONFIG_GFX_TEXT 1 /// Enable virtual coordinate system. -#define CONFIG_GFX_VCOORDS 1 +#define CONFIG_GFX_VCOORDS 1 /// Keyboard polling method #define CONFIG_KBD_POLL KBD_POLL_SOFTINT @@ -188,9 +198,12 @@ #define CONFIG_KBD_OBSERVER 0 /// Enable key beeps -#define CONFIG_KBD_BEEP 1 +#define CONFIG_KBD_BEEP 1 -/*! +/// Enable long pression handler for keys +#define CONFIG_KBD_LONGPRESS 1 + +/** * \name Type for the chart dataset * \{ */ @@ -204,4 +217,29 @@ /// Enable smooth scrolling in menus #define CONFIG_MENU_SMOOTH 1 -#endif /* CONFIG_COMMON_H */ +/// Size of block for MD2 algorithm. +#define CONFIG_MD2_BLOCK_LEN 16 + +/// Use standard permutation in MD2 algorithm. +#define CONFIG_MD2_STD_PERM 0 + +/// Define a size, in byte, of entropy pool. +#define CONFIG_SIZE_ENTROPY_POOL 64 + +/// Turn on or off timer support in Randpool. +#define CONFIG_RANDPOOL_TIMER 1 + +/** + * ADC timing setting parameter + * + * - CONFIG_ADC_CLOCK is frequency clock for ADC conversion. + * - CONFIG_ADC_STARTUP_TIME minimum time for startup a conversion in micro second. + * - CONFIG_ADC_SHTIME minimum time for sample and hold in nano second. + * \{ + */ +#define CONFIG_ADC_CLOCK 4800000UL +#define CONFIG_ADC_STARTUP_TIME 20 +#define CONFIG_ADC_SHTIME 834 +/* \} */ + +#endif /* APPCONFIG_H */