X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=appconfig_common.h;h=aa7db0b99e9567d7f19b50e552fee17958d56782;hb=5db9a047e4c96959fcde47fde001ec0e0bfb9bb5;hp=fc6a0b2248bb2c3830396fe7a768c10ffe0ae1ab;hpb=88e768c20e4347e1bf1101c8d941ff3797940cff;p=bertos.git

diff --git a/appconfig_common.h b/appconfig_common.h
index fc6a0b22..aa7db0b9 100755
--- a/appconfig_common.h
+++ b/appconfig_common.h
@@ -1,4 +1,4 @@
-/*!
+/**
  * \file
  * <!--
  * Copyright 2003, 2004, 2006 Develer S.r.l. (http://www.develer.com/)
@@ -46,6 +46,15 @@
 
 /*#*
  *#* $Log$
+ *#* Revision 1.4  2007/09/18 10:16:59  batt
+ *#* Merge from triface.
+ *#*
+ *#* Revision 1.3  2006/09/13 18:29:22  bernie
+ *#* Add a few missing CONFIG_ definitions.
+ *#*
+ *#* Revision 1.2  2006/07/19 12:56:24  bernie
+ *#* Convert to new Doxygen style.
+ *#*
  *#* Revision 1.1  2006/05/18 00:40:43  bernie
  *#* Rename appconfig.h to appconfig_common.h.
  *#*
@@ -83,13 +92,13 @@
  *#* Move cfg/config.h to appconfig.h.
  *#*/
 
-#ifndef CONFIG_COMMON_H
-#define CONFIG_COMMON_H
+#ifndef APPCONFIG_COMMON_H
+#define APPCONFIG_COMMON_H
 
-/*! Baud-rate for the kdebug console */
+/** Baud-rate for the kdebug console */
 #define CONFIG_KDEBUG_BAUDRATE  19200
 
-/*!
+/**
  * printf()-style formatter configuration.
  *
  * \sa PRINTF_DISABLED
@@ -100,54 +109,66 @@
  */
 #define CONFIG_PRINTF PRINTF_FULL
 
-/*!
+/**
  * Multithreading kernel.
  *
  * \sa config_kern.h
  */
-#define CONFIG_KERNEL 1
+#define CONFIG_KERNEL 0
 
-/*!
+/**
  * \name Serial driver parameters
  * \{
  */
-	/*! [bytes] Size of the outbound FIFO buffer for port 0. */
+	/** [bytes] Size of the outbound FIFO buffer for port 0. */
 	#define CONFIG_UART0_TXBUFSIZE  32
 
-	/*! [bytes] Size of the inbound FIFO buffer for port 0. */
+	/** [bytes] Size of the inbound FIFO buffer for port 0. */
 	#define CONFIG_UART0_RXBUFSIZE  64
 
-	/*! [bytes] Size of the outbound FIFO buffer for port 1. */
+	/** [bytes] Size of the outbound FIFO buffer for port 1. */
 	#define CONFIG_UART1_TXBUFSIZE  32
 
-	/*! [bytes] Size of the inbound FIFO buffer for port 1. */
+	/** [bytes] Size of the inbound FIFO buffer for port 1. */
 	#define CONFIG_UART1_RXBUFSIZE  64
 
-	/*! [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
+	/** [bytes] Size of the outbound FIFO buffer for SPI port (AVR only). */
 	#define CONFIG_SPI_TXBUFSIZE	16
 
-	/*! [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
+	/** [bytes] Size of the inbound FIFO buffer for SPI port (AVR only). */
 	#define CONFIG_SPI_RXBUFSIZE	32
 
-	/*! Default transmit timeout (ms). Set to -1 to disable timeout support */
+	/** SPI data order (AVR only). */
+	#define CONFIG_SPI_DATA_ORDER	SER_MSB_FIRST
+
+	/** SPI clock division factor (AVR only). */
+	#define CONFIG_SPI_CLOCK_DIV	16
+
+	/** SPI clock polarity: 0 = normal low, 1 = normal high (AVR only). */
+	#define CONFIG_SPI_CLOCK_POL	0
+
+	/** SPI clock phase: 0 = sample on first edge, 1 = sample on second clock edge (AVR only). */
+	#define CONFIG_SPI_CLOCK_PHASE	0
+
+	/** Default transmit timeout (ms). Set to -1 to disable timeout support */
 	#define CONFIG_SER_TXTIMEOUT    -1
 
-	/*! Default receive timeout (ms). Set to -1 to disable timeout support */
+	/** Default receive timeout (ms). Set to -1 to disable timeout support */
 	#define CONFIG_SER_RXTIMEOUT    -1
 
-	/*! Use RTS/CTS handshake */
+	/** Use RTS/CTS handshake */
 	#define CONFIG_SER_HWHANDSHAKE   0
 
-	/*! Default baud rate (set to 0 to disable) */
+	/** Default baud rate (set to 0 to disable) */
 	#define CONFIG_SER_DEFBAUDRATE   0
 
-	/*! Enable ser_gets() and ser_gets_echo() */
+	/** Enable ser_gets() and ser_gets_echo() */
 	#define CONFIG_SER_GETS          0
 
 	/** Enable second serial port in emulator. */
 	#define CONFIG_EMUL_UART1        0
 
-	/*!
+	/**
 	 * Transmit always something on serial port 0 TX
 	 * to avoid interference when sending burst of data,
 	 * using AVR multiprocessor serial mode
@@ -157,29 +178,32 @@
 	#define CONFIG_SER_STROBE        0
 /*\}*/
 
-//! Hardware timer selection for drv/timer.c
+/// Hardware timer selection for drv/timer.c
 #define CONFIG_TIMER  TIMER_ON_OUTPUT_COMPARE2
 
-//! Debug timer interrupt using a strobe pin.
+/// Debug timer interrupt using a strobe pin.
 #define CONFIG_TIMER_STROBE  0
 
-//! Enable watchdog timer.
+/// Enable ADS strobe.
+#define CONFIG_ADC_STROBE  0
+
+/// Enable watchdog timer.
 #define CONFIG_WATCHDOG  1
 
-//! EEPROM type for drv/eeprom.c
+/// EEPROM type for drv/eeprom.c
 #define CONFIG_EEPROM_TYPE EEPROM_24XX256
 
 /// Select bitmap pixel format.
 #define CONFIG_BITMAP_FMT  BITMAP_FMT_PLANAR_V_LSB
 
 /// Enable line clipping algorithm.
-#define CONFIG_GFX_CLIPPING 1
+#define CONFIG_GFX_CLIPPING  1
 
 /// Enable text rendering in bitmaps.
-#define CONFIG_GFX_TEXT 1
+#define CONFIG_GFX_TEXT  1
 
 /// Enable virtual coordinate system.
-#define CONFIG_GFX_VCOORDS 1
+#define CONFIG_GFX_VCOORDS  1
 
 /// Keyboard polling method
 #define CONFIG_KBD_POLL  KBD_POLL_SOFTINT
@@ -188,9 +212,12 @@
 #define CONFIG_KBD_OBSERVER  0
 
 /// Enable key beeps
-#define CONFIG_KBD_BEEP 1
+#define CONFIG_KBD_BEEP  1
+
+/// Enable long pression handler for keys
+#define CONFIG_KBD_LONGPRESS  1
 
-/*!
+/**
  * \name Type for the chart dataset
  * \{
  */
@@ -204,4 +231,4 @@
 /// Enable smooth scrolling in menus
 #define CONFIG_MENU_SMOOTH  1
 
-#endif /* CONFIG_COMMON_H */
+#endif /* APPCONFIG_COMMON_H */