X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=bertos%2Fcfg%2Fcfg_ser.h;h=ec113e528bdf521b7468a0f8fb6129544ed6ac37;hb=4278d44ef7681c56f4bd16615c3c4d9338112df4;hp=4fc85e37530a830641beb617b6dad00ed0617312;hpb=c5314cdb9fd0c2b69083fd608dfafd4d1c5cdb3d;p=bertos.git

diff --git a/bertos/cfg/cfg_ser.h b/bertos/cfg/cfg_ser.h
index 4fc85e37..ec113e52 100644
--- a/bertos/cfg/cfg_ser.h
+++ b/bertos/cfg/cfg_ser.h
@@ -32,8 +32,6 @@
  *
  * \brief Configuration file for serial module.
  *
- * \version $Id$
- *
  * \author Daniele Basile <asterix@develer.com>
  */
 
@@ -46,57 +44,208 @@
  * Edit these define for your project.
  */
 
+/**
+ * Enable port 0
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega"
+ */
+#define CONFIG_UART0_ENABLED 1
+
 /**
  * Size of the outbound FIFO buffer for port 0 [bytes].
  * $WIZ$ type = "int"
- * $WIZ$ min = "2"
+ * $WIZ$ min = 2
  */
 #define CONFIG_UART0_TXBUFSIZE  32
 
 /**
  * Size of the inbound FIFO buffer for port 0 [bytes].
  * $WIZ$ type = "int"
- * $WIZ$ min = "2"
+ * $WIZ$ min = 2
  */
 #define CONFIG_UART0_RXBUFSIZE  32
 
+/**
+ * Enable port 1
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega"
+ */
+#define CONFIG_UART1_ENABLED 1
+
 /**
  * Size of the outbound FIFO buffer for port 1 [bytes].
  * $WIZ$ type = "int"
- * $WIZ$ min = "2"
- * $WIZ$ supports = "at91 and not atmega8 and not atmega168 and not atmega32"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2 or xmega or (at91 and not atmega8 and not atmega168 and not atmega32)"
  */
 #define CONFIG_UART1_TXBUFSIZE  32
 
 /**
  * Size of the inbound FIFO buffer for port 1 [bytes].
  * $WIZ$ type = "int"
- * $WIZ$ min = "2"
- * $WIZ$ supports = "at91 and not atmega8 and not atmega168 and not atmega32"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2 or xmega or (at91 and not atmega8 and not atmega168 and not atmega32)"
  */
 #define CONFIG_UART1_RXBUFSIZE  32
 
+/**
+ * Enable port 2
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and (not xmegad4)"
+ */
+#define CONFIG_UART2_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 2 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2 or (xmega and not xmegad4)"
+ */
+#define CONFIG_UART2_TXBUFSIZE  32
+
+/**
+ * Size of the inbound FIFO buffer for port 2 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2 or (xmega and not xmegad4)"
+ */
+#define CONFIG_UART2_RXBUFSIZE  32
+
+/**
+ * Enable port 3
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART3_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 3 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lpc2 or xmega and not xmegad4"
+ */
+#define CONFIG_UART3_TXBUFSIZE  32
+
+/**
+ * Size of the inbound FIFO buffer for port 3 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lpc2 or xmega and not xmegad4"
+ */
+#define CONFIG_UART3_RXBUFSIZE  32
+
+/**
+ * Enable port 4
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 4 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_TXBUFSIZE  32
+
+/**
+ * Size of the inbound FIFO buffer for port 4 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmega and not xmegad4"
+ */
+#define CONFIG_UART4_RXBUFSIZE  32
+
+/**
+ * Enable port 5
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 5 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_TXBUFSIZE  32
 
 /**
- * [bytes] Size of the outbound FIFO buffer for SPI port.
+ * Size of the inbound FIFO buffer for port 5 [bytes].
  * $WIZ$ type = "int"
- * $WIZ$ min = "2"
- * $WIZ$ supports = "avr"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART5_RXBUFSIZE  32
+
+/**
+ * Enable port 6
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 6 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_TXBUFSIZE  32
+
+/**
+ * Size of the inbound FIFO buffer for port 6 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1 or xmegaa3"
+ */
+#define CONFIG_UART6_RXBUFSIZE  32
+
+/**
+ * Enable port 7
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_ENABLED 1
+
+/**
+ * Size of the outbound FIFO buffer for port 7 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_TXBUFSIZE  32
+
+/**
+ * Size of the inbound FIFO buffer for port 7 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "xmegaa1"
+ */
+#define CONFIG_UART7_RXBUFSIZE  32
+
+/**
+ * Size of the outbound FIFO buffer for SPI port [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "avr and not xmega"
  */
 #define CONFIG_SPI_TXBUFSIZE    32
 
 /**
- * [bytes] Size of the inbound FIFO buffer for SPI port.
+ * Size of the inbound FIFO buffer for SPI port [bytes].
  * $WIZ$ type = "int"
- * $WIZ$ min = "2"
- * $WIZ$ supports = "avr"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "avr and not xmega"
  */
 #define CONFIG_SPI_RXBUFSIZE    32
 
 /**
  * Size of the outbound FIFO buffer for SPI port 0 [bytes].
  * $WIZ$ type = "int"
- * $WIZ$ min = "2"
+ * $WIZ$ min = 2
  * $WIZ$ supports = "at91"
  */
 #define CONFIG_SPI0_TXBUFSIZE	32
@@ -104,7 +253,7 @@
 /**
  * Size of the inbound FIFO buffer for SPI port 0 [bytes].
  * $WIZ$ type = "int"
- * $WIZ$ min = "2"
+ * $WIZ$ min = 2
  * $WIZ$ supports = "at91"
  */
 #define CONFIG_SPI0_RXBUFSIZE	32
@@ -112,7 +261,7 @@
 /**
  * Size of the outbound FIFO buffer for SPI port 1 [bytes].
  * $WIZ$ type = "int"
- * $WIZ$ min = "2"
+ * $WIZ$ min = 2
  * $WIZ$ supports = "at91"
  */
 #define CONFIG_SPI1_TXBUFSIZE	32
@@ -120,7 +269,7 @@
 /**
  * Size of the inbound FIFO buffer for SPI port 1 [bytes].
  * $WIZ$ type = "int"
- * $WIZ$ min = "2"
+ * $WIZ$ min = 2
  * $WIZ$ supports = "at91"
  */
 #define CONFIG_SPI1_RXBUFSIZE	32
@@ -130,14 +279,14 @@
  *
  * $WIZ$ type = "enum"
  * $WIZ$ value_list = "ser_order_bit"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
  */
 #define CONFIG_SPI_DATA_ORDER	SER_MSB_FIRST
 
 /**
  * SPI clock division factor.
  * $WIZ$ type = "int"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
  */
 #define CONFIG_SPI_CLOCK_DIV	16
 
@@ -145,7 +294,7 @@
  * SPI clock polarity: normal low or normal high.
  * $WIZ$ type = "enum"
  * $WIZ$ value_list = "ser_spi_pol"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
  */
 #define CONFIG_SPI_CLOCK_POL        SPI_NORMAL_LOW
 
@@ -154,35 +303,39 @@
  * sample on second clock edge.
  * $WIZ$ type = "enum"
  * $WIZ$ value_list = "ser_spi_phase"
- * $WIZ$ supports = "avr"
+ * $WIZ$ supports = "avr and not xmega"
  */
 #define CONFIG_SPI_CLOCK_PHASE	    SPI_SAMPLE_ON_FIRST_EDGE
 
 /**
  * Default transmit timeout (ms). Set to -1 to disable timeout support.
  * $WIZ$ type = "int"
- * $WIZ$ min = "-1"
+ * $WIZ$ min = -1
  */
 #define CONFIG_SER_TXTIMEOUT    -1
 
 /**
  * Default receive timeout (ms). Set to -1 to disable timeout support.
  * $WIZ$ type = "int"
- * $WIZ$ min = "-1"
+ * $WIZ$ min = -1
  */
 #define CONFIG_SER_RXTIMEOUT    -1
 
-/// Use RTS/CTS handshake. $WIZ$ type = "boolean"
+/**
+ * Use RTS/CTS handshake.
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "False"
+ */
 #define CONFIG_SER_HWHANDSHAKE   0
 
 /**
- * Default baud rate for all serial ports (set to 0 to disable).
+ * Default baudrate for all serial ports (set to 0 to disable).
  * $WIZ$ type = "int"
- * $WIZ$ min = "0"
+ * $WIZ$ min = 0
  */
 #define CONFIG_SER_DEFBAUDRATE   0UL
 
-/// Enable strobe pin for serial debug. $WIZ$ type = "boolean"
+/// Enable strobe pin for debugging serial interrupt. $WIZ$ type = "boolean"
 #define CONFIG_SER_STROBE        0
 
 #endif /* CFG_SER_H */