X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=bertos%2Fcpu%2Farm%2Fscripts%2Fopenocd%2Fopenocd_at91sam7_ftdi_rom.cfg;fp=bertos%2Fcpu%2Farm%2Fscripts%2Fopenocd%2Fopenocd_at91sam7_ftdi_rom.cfg;h=0000000000000000000000000000000000000000;hb=c9559176347d10ddf602a14fe804c81c7f0b3d8e;hp=bb0602a147e64fe671ca4a9c0bd7997504d549a0;hpb=a340f5d946de81802065b1ec7211e6e076e795bb;p=bertos.git

diff --git a/bertos/cpu/arm/scripts/openocd/openocd_at91sam7_ftdi_rom.cfg b/bertos/cpu/arm/scripts/openocd/openocd_at91sam7_ftdi_rom.cfg
deleted file mode 100644
index bb0602a1..00000000
--- a/bertos/cpu/arm/scripts/openocd/openocd_at91sam7_ftdi_rom.cfg
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# Flash AT91SAM7S memory using openocd 
-# and a FTDI FT2232-based JTAG-interface
-#
-# created by Martin Thomas 
-# based on information from Dominic Rath
-#
-
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 0
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_init 0 arm7tdmi
-run_and_halt_time 0 30
-
-# flash-options AT91
-target_script 0 reset openocd_at91sam7_flash.script
-working_area 0 0x00100000 0x40000 nobackup
-flash bank at91sam7 0 0 0 0 0
-
-# Information: 
-# erase command (telnet-interface) for complete flash:
-# flash erase <num> 0 numlockbits-1 (can be seen from output of flash info 0)
-# SAM7S64 with 16 lockbits and bank 0: flash erase 0 0 15
-# set/clear NVM-Bits:
-# at91sam7 gpnvm <num> <bit> <set|clear>
-# disable locking from SAM-BA
-# flash protect 0 0 1 off
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger