X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=bertos%2Fcpu%2Farm%2Fscripts%2Fopenocd_at91sam7_ftdi_ram.cfg;fp=bertos%2Fcpu%2Farm%2Fscripts%2Fopenocd_at91sam7_ftdi_ram.cfg;h=0000000000000000000000000000000000000000;hb=6abf03e019383ce5c269318dd72e9d237377cbe5;hp=b8f7ba1694606635ad7a3009b53fd66f95bb78a0;hpb=388f7931a07e3bf406978bdf788d34e86f33bf53;p=bertos.git diff --git a/bertos/cpu/arm/scripts/openocd_at91sam7_ftdi_ram.cfg b/bertos/cpu/arm/scripts/openocd_at91sam7_ftdi_ram.cfg deleted file mode 100644 index b8f7ba16..00000000 --- a/bertos/cpu/arm/scripts/openocd_at91sam7_ftdi_ram.cfg +++ /dev/null @@ -1,52 +0,0 @@ -# -# Flash AT91SAM7S memory using openocd -# and a FTDI FT2232-based JTAG-interface -# -# created by Martin Thomas -# based on information from Dominic Rath -# - -#daemon configuration -telnet_port 4444 -gdb_port 3333 - -#interface -interface ft2232 -ft2232_device_desc "Amontec JTAGkey" -ft2232_layout jtagkey -ft2232_vid_pid 0x0403 0xcff8 -jtag_speed 0 -jtag_nsrst_delay 200 -jtag_ntrst_delay 200 - -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config srst_only srst_pulls_trst - -#jtag scan chain -#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) -jtag_device 4 0x1 0xf 0xe - -#target configuration -daemon_startup reset - -#target -#target arm7tdmi -target arm7tdmi little run_and_init 0 arm7tdmi -run_and_halt_time 0 30 - -# flash-options AT91 -target_script 0 reset openocd_at91sam7_reset.script -working_area 0 0x00200000 0x10000 nobackup -flash bank at91sam7 0 0 0 0 0 - -# Information: -# erase command (telnet-interface) for complete flash: -# flash erase 0 numlockbits-1 (can be seen from output of flash info 0) -# SAM7S64 with 16 lockbits and bank 0: flash erase 0 0 15 -# set/clear NVM-Bits: -# at91sam7 gpnvm -# disable locking from SAM-BA -# flash protect 0 0 1 off - -# For more information about the configuration files, take a look at: -# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger