X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=bertos%2Fcpu%2Favr%2Fdrv%2Fser_avr.c;h=805c0a6601c8fb2134eb750e058a33916a0d106a;hb=ef59482dd1c7167b3cb5718572c42019cf16594b;hp=d3cc743d0d6ca0e32d7d492832bccfd301a509b5;hpb=8dabf14299bc6b3b9fc0b4dfdeba91af82aba46c;p=bertos.git

diff --git a/bertos/cpu/avr/drv/ser_avr.c b/bertos/cpu/avr/drv/ser_avr.c
index d3cc743d..805c0a66 100644
--- a/bertos/cpu/avr/drv/ser_avr.c
+++ b/bertos/cpu/avr/drv/ser_avr.c
@@ -46,6 +46,7 @@
 
 #include <cfg/macros.h> /* DIV_ROUND */
 #include <cfg/debug.h>
+#include <cfg/cfg_arch.h> // ARCH_NIGHTTEST
 
 #include <drv/ser.h>
 #include <drv/ser_p.h>
@@ -286,23 +287,6 @@
 #endif
 
 
-/**
- * \def CONFIG_SER_STROBE
- *
- * This is a debug facility that can be used to
- * monitor SER interrupt activity on an external pin.
- *
- * To use strobes, redefine the macros SER_STROBE_ON,
- * SER_STROBE_OFF and SER_STROBE_INIT and set
- * CONFIG_SER_STROBE to 1.
- */
-#if !defined(CONFIG_SER_STROBE) || !CONFIG_SER_STROBE
-	#define SER_STROBE_ON    do {/*nop*/} while(0)
-	#define SER_STROBE_OFF   do {/*nop*/} while(0)
-	#define SER_STROBE_INIT  do {/*nop*/} while(0)
-#endif
-
-
 /* From the high-level serial driver */
 extern struct Serial *ser_handles[SER_CNT];
 
@@ -470,7 +454,7 @@ static void spi_init(UNUSED_ARG(struct SerialHardware *, _hw), UNUSED_ARG(struct
 	 * - as input but tied high forever!
 	 * This driver set the pin as output.
 	 */
-	#warning SPI SS pin set as output for proper operation, check schematics for possible conflicts.
+	#warning FIXME:SPI SS pin set as output for proper operation, check schematics for possible conflicts.
 	ATOMIC(SPI_DDR |= BV(SPI_SS_BIT));
 
 	ATOMIC(SPI_DDR &= ~BV(SPI_MISO_BIT));