X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=bertos%2Fdrv%2Fflash25.c;h=22639161032f8a0ac395c604690ce9328b7155a4;hb=8b2b3759daf3222963cbb3cd4364fef556622e87;hp=a36bbb38b2f8013feddfa24c8997040a24433348;hpb=e3467ccc87640e20dfe5b0b45c11cc06858d2392;p=bertos.git

diff --git a/bertos/drv/flash25.c b/bertos/drv/flash25.c
index a36bbb38..22639161 100644
--- a/bertos/drv/flash25.c
+++ b/bertos/drv/flash25.c
@@ -27,10 +27,9 @@
  * the GNU General Public License.
  *
  * Copyright 2007 Develer S.r.l. (http://www.develer.com/)
- *
  * -->
  *
- *  \brief Function library for serial Flash memory.
+ * \brief Function library for serial Flash memory.
  *
  * Module provide a kfile interface, that ensure an abstraction
  * from comunication channel and give a standard interface.
@@ -45,9 +44,7 @@
  * We use a spi bus, thus include hardware specific definition.
  * If you use another channel you must redefine this macros.
  */
-#include "hw_spi.h"
-
-#include <appconfig.h>
+#include "hw/hw_spi.h"
 
 #include <cfg/macros.h>
 #include <cfg/debug.h>
@@ -57,16 +54,14 @@
 
 #include <kern/kfile.h>
 
-#if CONFIG_KERNEL
-#include <kern/proc.h>
-#endif
+#include <cpu/power.h> /* cpu_relax() */
 
-#warning this file was change, but is untest!
+#warning FIXME:This file was change, but is untest!
 
 /**
  * Wait until flash memory is ready.
  */
-static void flash25_waitReady(KFileFlash25 *fd)
+static void flash25_waitReady(Flash25 *fd)
 {
 	uint8_t stat;
 
@@ -81,17 +76,15 @@ static void flash25_waitReady(KFileFlash25 *fd)
 
 		if (!(stat & RDY_BIT))
 			break;
-		#if CONFIG_KERNEL
-		else
-			proc_switch();
-		#endif
+
+		cpu_relax();
 	}
 }
 
 /**
  * Send a single command to serial flash memory.
  */
-static void flash25_sendCmd(KFileFlash25 *fd, Flash25Opcode cmd)
+static void flash25_sendCmd(Flash25 *fd, Flash25Opcode cmd)
 {
 	CS_ENABLE();
 
@@ -106,7 +99,7 @@ static void flash25_sendCmd(KFileFlash25 *fd, Flash25Opcode cmd)
  * try to read manufacturer id of serial memory,
  * then check if is equal to selected type.
  */
-static bool flash25_pin_init(KFileFlash25 *fd)
+static bool flash25_pin_init(Flash25 *fd)
 {
 	uint8_t device_id;
 	uint8_t manufacturer;
@@ -142,7 +135,7 @@ static bool flash25_pin_init(KFileFlash25 *fd)
  */
 static KFile * flash25_reopen(struct KFile *_fd)
 {
-	KFileFlash25 *fd = KFILEFLASH25(_fd);
+	Flash25 *fd = FLASH25_CAST(_fd);
 
 	fd->fd.seek_pos = 0;
 	fd->fd.size = FLASH25_MEM_SIZE;
@@ -178,10 +171,10 @@ static size_t flash25_read(struct KFile *_fd, void *buf, size_t size)
 {
 	uint8_t *data = (uint8_t *)buf;
 
-	KFileFlash25 *fd = KFILEFLASH25(_fd);
+	Flash25 *fd = FLASH25_CAST(_fd);
 
-	ASSERT(fd->fd.seek_pos + size <= fd->fd.size);
-	size = MIN((kfile_size_t)size, fd->fd.size - fd->fd.seek_pos);
+	ASSERT(fd->fd.seek_pos + (kfile_off_t)size <= fd->fd.size);
+	size = MIN((kfile_off_t)size, fd->fd.size - fd->fd.seek_pos);
 
 	//kprintf("Reading at addr[%lu], size[%d]\n", fd->seek_pos, size);
 	CS_ENABLE();
@@ -231,11 +224,11 @@ static size_t flash25_write(struct KFile *_fd, const void *_buf, size_t size)
 	flash25Size_t wr_len;
 	const uint8_t *data = (const uint8_t *) _buf;
 
-	KFileFlash25 *fd = KFILEFLASH25(_fd);
+	Flash25 *fd = FLASH25_CAST(_fd);
 
-	ASSERT(fd->fd.seek_pos + size <= fd->fd.size);
+	ASSERT(fd->fd.seek_pos + (kfile_off_t)size <= fd->fd.size);
 
-	size = MIN((kfile_size_t)size, fd->fd.size - fd->fd.seek_pos);
+	size = MIN((kfile_off_t)size, fd->fd.size - fd->fd.seek_pos);
 
 	while (size)
 	{
@@ -284,7 +277,7 @@ static size_t flash25_write(struct KFile *_fd, const void *_buf, size_t size)
 		total_write += wr_len;
 	}
 
-	kprintf("written %u bytes\n", total_write);
+	kprintf("written %lu bytes\n", total_write);
 	return total_write;
 }
 
@@ -296,7 +289,7 @@ static size_t flash25_write(struct KFile *_fd, const void *_buf, size_t size)
  * \note A sector size is FLASH25_SECTOR_SIZE.
  * This operation could take a while.
  */
-void flash25_sectorErase(KFileFlash25 *fd, Flash25Sector sector)
+void flash25_sectorErase(Flash25 *fd, Flash25Sector sector)
 {
 
 	/*
@@ -332,8 +325,7 @@ void flash25_sectorErase(KFileFlash25 *fd, Flash25Sector sector)
 	 */
 	flash25_waitReady(fd);
 
-	DB(kprintf("Erased sector [%d] in %d ms\n", sector, ticks_to_ms(timer_clock() - start_time)));
-
+	DB(kprintf("Erased sector [%ld] in %ld ms\n", (unsigned long)sector, (unsigned long)ticks_to_ms(timer_clock() - start_time)));
 }
 
 /**
@@ -343,7 +335,7 @@ void flash25_sectorErase(KFileFlash25 *fd, Flash25Sector sector)
  *
  * \note This operation could take a while.
  */
-void flash25_chipErase(KFileFlash25 *fd)
+void flash25_chipErase(Flash25 *fd)
 {
 	/*
 	 * Erase all chip could take a while,
@@ -366,14 +358,14 @@ void flash25_chipErase(KFileFlash25 *fd)
 	 */
 	flash25_waitReady(fd);
 
-	DB(kprintf("Erased all memory in %d ms\n", ticks_to_ms(timer_clock() - start_time)));
+	DB(kprintf("Erased all memory in %ld ms\n", ticks_to_ms(timer_clock() - start_time)));
 
 }
 
 /**
  * Init data flash memory interface.
  */
-void flash25_init(KFileFlash25 *fd, KFile *ch)
+void flash25_init(Flash25 *fd, KFile *ch)
 {
 
 	ASSERT(fd);