X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=bertos%2Fdrv%2Fser.c;h=a684ebbaf6cdcb22767afe8ad248fb09db685235;hb=d2c2001899efee5a35d5a63d8327a8e02b680101;hp=60b1b749e33712d0a6d0edd3a7d15ba1b9104d76;hpb=daa94997a9030b315892e2f2a36317398bc7b047;p=bertos.git

diff --git a/bertos/drv/ser.c b/bertos/drv/ser.c
index 60b1b749..a684ebba 100644
--- a/bertos/drv/ser.c
+++ b/bertos/drv/ser.c
@@ -56,7 +56,7 @@
 #include "ser_p.h"
 
 #include "cfg/cfg_ser.h"
-#include "cfg/cfg_kern.h"
+#include "cfg/cfg_proc.h"
 #include <cfg/debug.h>
 
 #include <mware/formatwr.h>
@@ -69,7 +69,7 @@
  * Sanity check for config parameters required by this module.
  */
 #if !defined(CONFIG_KERN) || ((CONFIG_KERN != 0) && CONFIG_KERN != 1)
-	#error CONFIG_KERNEL must be set to either 0 or 1 in cfg_kern.h
+	#error CONFIG_KERN must be set to either 0 or 1 in cfg_kern.h
 #endif
 #if !defined(CONFIG_SER_RXTIMEOUT)
 	#error CONFIG_SER_TXTIMEOUT missing in cfg_ser.h
@@ -241,38 +241,20 @@ static size_t ser_write(struct KFile *fd, const void *_buf, size_t size)
 #if CONFIG_SER_RXTIMEOUT != -1 || CONFIG_SER_TXTIMEOUT != -1
 void ser_settimeouts(struct Serial *fd, mtime_t rxtimeout, mtime_t txtimeout)
 {
-	fd->rxtimeout = ms_to_ticks(rxtimeout);
-	fd->txtimeout = ms_to_ticks(txtimeout);
+	#if CONFIG_SER_RXTIMEOUT != -1
+		fd->rxtimeout = ms_to_ticks(rxtimeout);
+	#else
+		(void)rxtimeout;
+	#endif
+
+	#if CONFIG_SER_TXTIMEOUT != -1
+		fd->txtimeout = ms_to_ticks(txtimeout);
+	#else
+		(void)txtimeout;
+	#endif
 }
 #endif /* CONFIG_SER_RXTIMEOUT || CONFIG_SER_TXTIMEOUT */
 
-#if CONFIG_SER_RXTIMEOUT != -1
-/**
- * Discard input to resynchronize with remote end.
- *
- * Discard incoming data until the port stops receiving
- * characters for at least \a delay milliseconds.
- *
- * \note Serial errors are reset before and after executing the purge.
- */
-void ser_resync(struct Serial *fd, mtime_t delay)
-{
-	mtime_t old_rxtimeout = ticks_to_ms(fd->rxtimeout);
-
-	ser_settimeouts(fd, delay, ticks_to_ms(fd->txtimeout));
-	do
-	{
-		ser_setstatus(fd, 0);
-		ser_getchar(fd);
-	}
-	while (!(ser_getstatus(fd) & SERRF_RXTIMEOUT));
-
-	/* Restore port to an usable status */
-	ser_setstatus(fd, 0);
-	ser_settimeouts(fd, old_rxtimeout, ticks_to_ms(fd->txtimeout));
-}
-#endif /* CONFIG_SER_RXTIMEOUT */
-
 
 void ser_setbaudrate(struct Serial *fd, unsigned long rate)
 {