X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=bertos%2Fnet%2Fax25.c;h=3bd3e75ce2376c3d7220ee056daae962e3e21917;hb=ee52abf7300bb120fa17966d581afe1938b2d0e8;hp=68a6ae56d777066356d1ce66bff0473d1a99f862;hpb=319029b456527124521b6a6a65c21edb321cdcb8;p=bertos.git

diff --git a/bertos/net/ax25.c b/bertos/net/ax25.c
index 68a6ae56..3bd3e75c 100644
--- a/bertos/net/ax25.c
+++ b/bertos/net/ax25.c
@@ -34,7 +34,6 @@
  * For now, only UI frames without any Layer 3 protocol are handled.
  * This however is enough to send/receive APRS packets.
  *
- * \version $Id$
  * \author Francesco Sacchi <batt@develer.com>
  *
  */
@@ -51,10 +50,22 @@
 #include <string.h> //memset, memcmp
 #include <ctype.h>  //isalnum, toupper
 
+#if CONFIG_AX25_RPT_LST
+	#define AX25_SET_REPEATED(msg, idx, val) \
+		do \
+		{ \
+			if (val) \
+				(msg)->rpt_flags |= BV(idx) ; \
+			else \
+				(msg)->rpt_flags &= ~BV(idx) ; \
+		} while(0) 
+#endif
+
 #define DECODE_CALL(buf, addr) \
 	for (unsigned i = 0; i < sizeof((addr)); i++) \
 	{ \
-		(addr)[i] = *(buf)++ >> 1; \
+		char c = (*(buf)++ >> 1); \
+		(addr)[i] = (c == ' ') ? '\x0' : c; \
 	}
 
 static void ax25_decode(AX25Ctx *ctx)
@@ -76,7 +87,12 @@ static void ax25_decode(AX25Ctx *ctx)
 		{
 			DECODE_CALL(buf, msg.rpt_lst[msg.rpt_cnt].call);
 			msg.rpt_lst[msg.rpt_cnt].ssid = (*buf >> 1) & 0x0F;
-			LOG_INFO("RPT%d[%.6s-%d]\n", msg.rpt_cnt, msg.rpt_lst[msg.rpt_cnt].call, msg.rpt_lst[msg.rpt_cnt].ssid);
+			AX25_SET_REPEATED(&msg, msg.rpt_cnt, (*buf & 0x80));
+
+			LOG_INFO("RPT%d[%.6s-%d]%c\n", msg.rpt_cnt, 
+				msg.rpt_lst[msg.rpt_cnt].call, 
+				msg.rpt_lst[msg.rpt_cnt].ssid,
+				(AX25_REPEATED(&msg, msg.rpt_cnt) ? '*' : ' '));
 		}
 	#else
 		while (!(*buf++ & 0x01))
@@ -210,8 +226,10 @@ static void ax25_sendCall(AX25Ctx *ctx, const AX25Call *addr, bool last)
 		for (unsigned i = 0; i < sizeof(addr->call) - len; i++)
 			ax25_putchar(ctx, ' ' << 1);
 
+	/* The bit7 "has-been-repeated" flag is not implemented here */
+	/* Bits6:5 should be set to 1 for all SSIDs (0x60) */
 	/* The bit0 of last call SSID should be set to 1 */
-	uint8_t ssid = addr->ssid << 1 | (last ? 0x01 : 0);
+	uint8_t ssid = 0x60 | (addr->ssid << 1) | (last ? 0x01 : 0);
 	ax25_putchar(ctx, ssid);
 }
 
@@ -258,6 +276,39 @@ void ax25_sendVia(AX25Ctx *ctx, const AX25Call *path, size_t path_len, const voi
 	kfile_putc(HDLC_FLAG, ctx->ch);
 }
 
+static void print_call(KFile *ch, const AX25Call *call)
+{
+	kfile_printf(ch, "%.6s", call->call);
+	if (call->ssid)
+		kfile_printf(ch, "-%d", call->ssid);
+}
+
+/**
+ * Print a AX25 message in TNC-2 packet monitor format.
+ * \param ch a kfile channel where the message will be printed.
+ * \param msg the message to be printed.
+ */
+void ax25_print(KFile *ch, const AX25Msg *msg)
+{
+	print_call(ch, &msg->src);
+	kfile_putc('>', ch);
+	print_call(ch, &msg->dst);
+
+	#if CONFIG_AX25_RPT_LST
+	for (int i = 0; i < msg->rpt_cnt; i++)
+	{
+		kfile_putc(',', ch);
+		print_call(ch, &msg->rpt_lst[i]);
+		/* Print a '*' if packet has already been transmitted 
+		 * by this repeater */
+		if (AX25_REPEATED(msg, i))
+			kfile_putc('*', ch);
+	}
+	#endif
+
+	kfile_printf(ch, ":%.*s\n", msg->len, msg->info);
+}
+
 
 /**
  * Init the AX25 protocol decoder.