X-Git-Url: https://codewiz.org/gitweb?a=blobdiff_plain;f=bertos%2Fnet%2Flwip%2Fsrc%2Fnetif%2FFILES;fp=bertos%2Fnet%2Flwip%2Fsrc%2Fnetif%2FFILES;h=099dbf3ec2be5903047e5e7e4d2d8087c916a438;hb=4d3d475185ab73ce7f11d59568ffbc761923d428;hp=0000000000000000000000000000000000000000;hpb=961e7ada98d6520a74818efa4731210c1375b068;p=bertos.git

diff --git a/bertos/net/lwip/src/netif/FILES b/bertos/net/lwip/src/netif/FILES
new file mode 100644
index 00000000..099dbf3e
--- /dev/null
+++ b/bertos/net/lwip/src/netif/FILES
@@ -0,0 +1,29 @@
+This directory contains generic network interface device drivers that
+do not contain any hardware or architecture specific code. The files
+are:
+
+etharp.c
+          Implements the ARP (Address Resolution Protocol) over
+          Ethernet. The code in this file should be used together with
+          Ethernet device drivers. Note that this module has been
+          largely made Ethernet independent so you should be able to
+          adapt this for other link layers (such as Firewire).
+
+ethernetif.c
+          An example of how an Ethernet device driver could look. This
+          file can be used as a "skeleton" for developing new Ethernet
+          network device drivers. It uses the etharp.c ARP code.
+
+loopif.c
+          A "loopback" network interface driver. It requires configuration
+          through the define LWIP_LOOPIF_MULTITHREADING (see opt.h).
+
+slipif.c
+          A generic implementation of the SLIP (Serial Line IP)
+          protocol. It requires a sio (serial I/O) module to work.
+
+ppp/      Point-to-Point Protocol stack
+          The PPP stack has been ported from ucip (http://ucip.sourceforge.net).
+          It matches quite well to pppd 2.3.1 (http://ppp.samba.org), although
+          compared to that, it has some modifications for embedded systems and
+          the source code has been reordered a bit.
\ No newline at end of file